From: Bin Meng Date: Thu, 18 Jul 2019 07:34:13 +0000 (-0700) Subject: doc: board: Add coreboot board doc X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a856e934cafdc0a255983a4a87558808d1a5085a;p=u-boot.git doc: board: Add coreboot board doc This extracts coreboot board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng --- diff --git a/doc/README.x86 b/doc/README.x86 index 2374be9eb3..c987439f8a 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -39,14 +39,6 @@ Linux kernel as part of a FIT image. It also supports a compressed zImage. U-Boot supports loading an x86 VxWorks kernel. Please check README.vxworks for more details. -Build Instructions for U-Boot as coreboot payload -------------------------------------------------- -Building U-Boot as a coreboot payload is just like building U-Boot for targets -on other architectures, like below: - -$ make coreboot_defconfig -$ make all - Build Instructions for U-Boot as BIOS replacement (bare mode) ------------------------------------------------------------- Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a @@ -82,35 +74,6 @@ Device Tree Control ---> ... (qemu-x86_q35) Default Device Tree for DT control -Test with coreboot ------------------- -For testing U-Boot as the coreboot payload, there are things that need be paid -attention to. coreboot supports loading an ELF executable and a 32-bit plain -binary, as well as other supported payloads. With the default configuration, -U-Boot is set up to use a separate Device Tree Blob (dtb). As of today, the -generated u-boot-dtb.bin needs to be packaged by the cbfstool utility (a tool -provided by coreboot) manually as coreboot's 'make menuconfig' does not provide -this capability yet. The command is as follows: - -# in the coreboot root directory -$ ./build/util/cbfstool/cbfstool build/coreboot.rom add-flat-binary \ - -f u-boot-dtb.bin -n fallback/payload -c lzma -l 0x1110000 -e 0x1110000 - -Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE, which is the symbol address -of _x86boot_start (in arch/x86/cpu/start.S). - -If you want to use ELF as the coreboot payload, change U-Boot configuration to -use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE. - -To enable video you must enable these options in coreboot: - - - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5)) - - Keep VESA framebuffer - -At present it seems that for Minnowboard Max, coreboot does not pass through -the video information correctly (it always says the resolution is 0x0). This -works correctly for link though. - Test with QEMU for bare mode ---------------------------- QEMU is a fancy emulator that can enable us to test U-Boot without access to diff --git a/doc/board/coreboot/coreboot.rst b/doc/board/coreboot/coreboot.rst new file mode 100644 index 0000000000..fd974229eb --- /dev/null +++ b/doc/board/coreboot/coreboot.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Bin Meng + +Coreboot +======== + +Build Instructions for U-Boot as coreboot payload +------------------------------------------------- +Building U-Boot as a coreboot payload is just like building U-Boot for targets +on other architectures, like below:: + + $ make coreboot_defconfig + $ make all + +Test with coreboot +------------------ +For testing U-Boot as the coreboot payload, there are things that need be paid +attention to. coreboot supports loading an ELF executable and a 32-bit plain +binary, as well as other supported payloads. With the default configuration, +U-Boot is set up to use a separate Device Tree Blob (dtb). As of today, the +generated u-boot-dtb.bin needs to be packaged by the cbfstool utility (a tool +provided by coreboot) manually as coreboot's 'make menuconfig' does not provide +this capability yet. The command is as follows:: + + # in the coreboot root directory + $ ./build/util/cbfstool/cbfstool build/coreboot.rom add-flat-binary \ + -f u-boot-dtb.bin -n fallback/payload -c lzma -l 0x1110000 -e 0x1110000 + +Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE, which is the symbol address +of _x86boot_start (in arch/x86/cpu/start.S). + +If you want to use ELF as the coreboot payload, change U-Boot configuration to +use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE. + +To enable video you must enable these options in coreboot: + + - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5)) + - Keep VESA framebuffer + +At present it seems that for Minnowboard Max, coreboot does not pass through +the video information correctly (it always says the resolution is 0x0). This +works correctly for link though. diff --git a/doc/board/coreboot/index.rst b/doc/board/coreboot/index.rst new file mode 100644 index 0000000000..d148db95f3 --- /dev/null +++ b/doc/board/coreboot/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Coreboot +======== + +.. toctree:: + :maxdepth: 2 + + coreboot diff --git a/doc/board/index.rst b/doc/board/index.rst index 59f745d7e5..eb21a67346 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -6,5 +6,6 @@ Board-specific doc .. toctree:: :maxdepth: 2 + coreboot/index google/index intel/index