From: Simon Glass Date: Sun, 1 Sep 2019 03:23:18 +0000 (-0600) Subject: x86: pci: Drop the first parameter in pci_x86_r/w_config() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a827ba910cdbcae6d0a1c2ce7b91b41d00218a4c;p=u-boot.git x86: pci: Drop the first parameter in pci_x86_r/w_config() This parameter is needed by the PCI driver-mode interface but is always NULL on x86. There are a number of calls to this function so it makes sense to minimise the parameters. Adjust the x86 function to omit the first parameter, and introduce stub functions to handle the conversion. Signed-off-by: Simon Glass Reviewed-by: Bin Meng [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng --- diff --git a/arch/x86/cpu/broadwell/cpu.c b/arch/x86/cpu/broadwell/cpu.c index bba8cd1e94..297f1e0b68 100644 --- a/arch/x86/cpu/broadwell/cpu.c +++ b/arch/x86/cpu/broadwell/cpu.c @@ -103,11 +103,8 @@ int print_cpuinfo(void) void board_debug_uart_init(void) { - struct udevice *bus = NULL; - /* com1 / com2 decode range */ - pci_x86_write_config(bus, PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16); + pci_x86_write_config(PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16); - pci_x86_write_config(bus, PCH_DEV_LPC, LPC_EN, COMA_LPC_EN, - PCI_SIZE_16); + pci_x86_write_config(PCH_DEV_LPC, LPC_EN, COMA_LPC_EN, PCI_SIZE_16); } diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index c8b16e32c0..6db9da81b7 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -199,6 +199,5 @@ int print_cpuinfo(void) void board_debug_uart_init(void) { /* This enables the debug UART */ - pci_x86_write_config(NULL, PCH_LPC_DEV, LPC_EN, COMA_LPC_EN, - PCI_SIZE_16); + pci_x86_write_config(PCH_LPC_DEV, LPC_EN, COMA_LPC_EN, PCI_SIZE_16); } diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c index 0ccde194d9..e1aae158ce 100644 --- a/arch/x86/cpu/pci.c +++ b/arch/x86/cpu/pci.c @@ -16,12 +16,8 @@ #include #include -/* - * TODO(sjg@chromium.org): Drop the first parameter from each of these - * functions since it is not used. - */ -int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong *valuep, enum pci_size_t size) +int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size) { outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); switch (size) { @@ -39,8 +35,8 @@ int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; } -int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong value, enum pci_size_t size) +int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size) { outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); switch (size) { @@ -58,19 +54,19 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; } -int pci_x86_clrset_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong clr, ulong set, enum pci_size_t size) +int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, + enum pci_size_t size) { ulong value; int ret; - ret = pci_x86_read_config(bus, bdf, offset, &value, size); + ret = pci_x86_read_config(bdf, offset, &value, size); if (ret) return ret; value &= ~clr; value |= set; - return pci_x86_write_config(bus, bdf, offset, value, size); + return pci_x86_write_config(bdf, offset, value, size); } void pci_assign_irqs(int bus, int device, u8 irq[4]) diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index fb1edf3df7..2a72073572 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -22,30 +22,28 @@ * * This function can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size * @return 0 if OK, -ve on error */ -int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong *valuep, enum pci_size_t size); +int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size); /** * pci_bus_write_config() - Write a configuration value to a device * * This function can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to write * @value: Value to write * @size: Access size * @return 0 if OK, -ve on error */ -int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong value, enum pci_size_t size); +int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size); /** * pci_bus_clrset_config32() - Update a configuration value for a device @@ -53,15 +51,14 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, * The register at @offset is updated to (oldvalue & ~clr) | set. This function * can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to update * @clr: Bits to clear * @set: Bits to set * @return 0 if OK, -ve on error */ -int pci_x86_clrset_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong clr, ulong set, enum pci_size_t size); +int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, + enum pci_size_t size); /** * Assign IRQ number to a PCI device diff --git a/drivers/pci/pci_x86.c b/drivers/pci/pci_x86.c index 520ea4649e..e76a9c6e44 100644 --- a/drivers/pci/pci_x86.c +++ b/drivers/pci/pci_x86.c @@ -8,9 +8,21 @@ #include #include +static int _pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size) +{ + return pci_x86_read_config(bdf, offset, valuep, size); +} + +static int _pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, enum pci_size_t size) +{ + return pci_x86_write_config(bdf, offset, value, size); +} + static const struct dm_pci_ops pci_x86_ops = { - .read_config = pci_x86_read_config, - .write_config = pci_x86_write_config, + .read_config = _pci_x86_read_config, + .write_config = _pci_x86_write_config, }; static const struct udevice_id pci_x86_ids[] = {