From: Samuel Holland Date: Mon, 5 Jul 2021 12:29:01 +0000 (+0100) Subject: phy: sun50i-usb3: Add a driver for the H6 USB3 PHY X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a814dbe7229681ed4ecb248fa3892b1882dcceac;p=u-boot.git phy: sun50i-usb3: Add a driver for the H6 USB3 PHY This driver is needed for XHCI to work on the Allwinner H6 SoC. The driver is copied from Linux v5.10. Reviewed-by: Andre Przywara Signed-off-by: Samuel Holland Signed-off-by: Andre Przywara --- diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index dba3bae61c..6bfb79cbca 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -11,3 +11,11 @@ config PHY_SUN4I_USB This driver controls the entire USB PHY block, both the USB OTG parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SUN50I_USB3 + bool "Allwinner sun50i USB3 PHY driver" + depends on ARCH_SUNXI + select PHY + help + Enable this to support the USB3 transceiver that is part of + Allwinner sun50i SoCs. diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile index e709fca643..f2b60ce1a6 100644 --- a/drivers/phy/allwinner/Makefile +++ b/drivers/phy/allwinner/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SUN50I_USB3) += phy-sun50i-usb3.o diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c new file mode 100644 index 0000000000..e5a3d2d92e --- /dev/null +++ b/drivers/phy/allwinner/phy-sun50i-usb3.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Allwinner sun50i(H6) USB 3.0 phy driver + * + * Copyright (C) 2020 Samuel Holland + * + * Based on the Linux driver, which is: + * + * Copyright (C) 2017 Icenowy Zheng + * + * Based on phy-sun9i-usb.c, which is: + * + * Copyright (C) 2014-2015 Chen-Yu Tsai + * + * Based on code from Allwinner BSP, which is: + * + * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Interface Status and Control Registers */ +#define SUNXI_ISCR 0x00 +#define SUNXI_PIPE_CLOCK_CONTROL 0x14 +#define SUNXI_PHY_TUNE_LOW 0x18 +#define SUNXI_PHY_TUNE_HIGH 0x1c +#define SUNXI_PHY_EXTERNAL_CONTROL 0x20 + +/* USB2.0 Interface Status and Control Register */ +#define SUNXI_ISCR_FORCE_VBUS (3 << 12) + +/* PIPE Clock Control Register */ +#define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6) + +/* PHY External Control Register */ +#define SUNXI_PEC_EXTERN_VBUS (3 << 1) +#define SUNXI_PEC_SSC_EN (1 << 24) +#define SUNXI_PEC_REF_SSP_EN (1 << 26) + +/* PHY Tune High Register */ +#define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19) +#define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19) +#define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13) +#define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13) +#define SUNXI_TX_SWING_FULL(n) ((n) << 6) +#define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6) +#define SUNXI_LOS_BIAS(n) ((n) << 3) +#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3) +#define SUNXI_TXVBOOSTLVL(n) ((n) << 0) +#define SUNXI_TXVBOOSTLVL_MASK GENMASK(2, 0) + +struct sun50i_usb3_phy_priv { + void __iomem *regs; + struct reset_ctl reset; + struct clk clk; +}; + +static void sun50i_usb3_phy_open(struct sun50i_usb3_phy_priv *phy) +{ + u32 val; + + val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL); + val |= SUNXI_PEC_EXTERN_VBUS; + val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN; + writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL); + + val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL); + val |= SUNXI_PCC_PIPE_CLK_OPEN; + writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL); + + val = readl(phy->regs + SUNXI_ISCR); + val |= SUNXI_ISCR_FORCE_VBUS; + writel(val, phy->regs + SUNXI_ISCR); + + /* + * All the magic numbers written to the PHY_TUNE_{LOW_HIGH} + * registers are directly taken from the BSP USB3 driver from + * Allwiner. + */ + writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW); + + val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH); + val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK | + SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK | + SUNXI_TX_DEEMPH_3P5DB_MASK); + val |= SUNXI_TXVBOOSTLVL(0x7); + val |= SUNXI_LOS_BIAS(0x7); + val |= SUNXI_TX_SWING_FULL(0x55); + val |= SUNXI_TX_DEEMPH_6DB(0x20); + val |= SUNXI_TX_DEEMPH_3P5DB(0x15); + writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH); +} + +static int sun50i_usb3_phy_init(struct phy *phy) +{ + struct sun50i_usb3_phy_priv *priv = dev_get_priv(phy->dev); + int ret; + + ret = clk_prepare_enable(&priv->clk); + if (ret) + return ret; + + ret = reset_deassert(&priv->reset); + if (ret) { + clk_disable_unprepare(&priv->clk); + return ret; + } + + sun50i_usb3_phy_open(priv); + + return 0; +} + +static int sun50i_usb3_phy_exit(struct phy *phy) +{ + struct sun50i_usb3_phy_priv *priv = dev_get_priv(phy->dev); + + reset_assert(&priv->reset); + clk_disable_unprepare(&priv->clk); + + return 0; +} + +static const struct phy_ops sun50i_usb3_phy_ops = { + .init = sun50i_usb3_phy_init, + .exit = sun50i_usb3_phy_exit, +}; + +static int sun50i_usb3_phy_probe(struct udevice *dev) +{ + struct sun50i_usb3_phy_priv *priv = dev_get_priv(dev); + int ret; + + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) { + dev_err(dev, "failed to get phy clock\n"); + return ret; + } + + ret = reset_get_by_index(dev, 0, &priv->reset); + if (ret) { + dev_err(dev, "failed to get reset control\n"); + return ret; + } + + priv->regs = (void __iomem *)dev_read_addr(dev); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + return 0; +} + +static const struct udevice_id sun50i_usb3_phy_ids[] = { + { .compatible = "allwinner,sun50i-h6-usb3-phy" }, + { }, +}; + +U_BOOT_DRIVER(sun50i_usb3_phy) = { + .name = "sun50i-usb3-phy", + .id = UCLASS_PHY, + .of_match = sun50i_usb3_phy_ids, + .ops = &sun50i_usb3_phy_ops, + .probe = sun50i_usb3_phy_probe, + .priv_auto = sizeof(struct sun50i_usb3_phy_priv), +};