From: Wadim Egorov Date: Fri, 19 Apr 2024 06:51:17 +0000 (+0200) Subject: phycore-rk3288: Migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a78224c130bf41b4467ed0468dd0ff36e7a7f35c;p=u-boot.git phycore-rk3288: Migrate to OF_UPSTREAM The phycore-rk3288 can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for rockchip vendor prefix accordingly. Move device tree nodes required for u-boot to rk3288-phycore-rdk-u-boot.dtsi such as chosen, i2c_eeprom_id and it's alias. Signed-off-by: Wadim Egorov --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 48a2b85542..a7a97a9f08 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -81,7 +81,6 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ rk3288-evb.dtb \ rk3288-firefly.dtb \ rk3288-miqi.dtb \ - rk3288-phycore-rdk.dtb \ rk3288-popmetal.dtb \ rk3288-rock2-square.dtb \ rk3288-rock-pi-n8.dtb \ diff --git a/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi b/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi index 383b383acc..12096eec54 100644 --- a/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi +++ b/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi @@ -2,6 +2,16 @@ #include "rk3288-u-boot.dtsi" +/ { + aliases { + eeprom0 = &i2c_eeprom_id; + }; + + chosen { + stdout-path = &uart2; + }; +}; + &dmc { rockchip,num-channels = <2>; rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa @@ -29,6 +39,15 @@ bootph-all; }; }; + + /* M24C32-D Identification page */ + i2c_eeprom_id: eeprom@58 { + bootph-all; + + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; }; &pinctrl { diff --git a/arch/arm/dts/rk3288-phycore-rdk.dts b/arch/arm/dts/rk3288-phycore-rdk.dts deleted file mode 100644 index ebea8e67ea..0000000000 --- a/arch/arm/dts/rk3288-phycore-rdk.dts +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Device tree file for Phytec PCM-947 carrier board - * Copyright (C) 2017 PHYTEC Messtechnik GmbH - * Author: Wadim Egorov - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include -#include "rk3288-phycore-som.dtsi" - -/ { - model = "Phytec RK3288 PCM-947"; - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; - - user_buttons: user-buttons { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&user_button_pins>; - - button@0 { - label = "home"; - linux,code = ; - gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; - - button@1 { - label = "menu"; - linux,code = ; - gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; - }; - - vcc_host0_5v: usb-host0-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host0_vbus_drv>; - regulator-name = "vcc_host0_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vdd_in_otg_out>; - }; - - vcc_host1_5v: usb-host1-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host1_vbus_drv>; - regulator-name = "vcc_host1_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vdd_in_otg_out>; - }; - - vcc_otg_5v: usb-otg-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc_otg_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vdd_in_otg_out>; - }; -}; - -&gmac { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - touchscreen@44 { - compatible = "st,stmpe811"; - reg = <0x44>; - }; - - adc@64 { - compatible = "maxim,max1037"; - reg = <0x64>; - }; - - i2c_rtc: rtc@68 { - compatible = "rv4162"; - reg = <0x68>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_rtc_int>; - interrupt-parent = <&gpio5>; - interrupts = <10 0>; - }; -}; - -&i2c3 { - status = "okay"; - - i2c_eeprom_cb: eeprom@51 { - compatible = "atmel,24c32"; - reg = <0x51>; - pagesize = <32>; - }; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&pinctrl { - pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { - bias-pull-up; - drive-strength = <12>; - }; - - buttons { - user_button_pins: user-button-pins { - /* button 1 */ - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>, - /* button 2 */ - <8 0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - rv4162 { - i2c_rtc_int: i2c-rtc-int { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - /* - * Default drive strength isn't enough to achieve even - * high-speed mode on pcm-947 board so bump up to 12 mA. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - touchscreen { - ts_irq_pin: ts-irq-pin { - rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_host { - host0_vbus_drv: host0-vbus-drv { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - host1_vbus_drv: host1-vbus-drv { - rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vdd_io_sd>; - vqmmc-supply = <&vdd_io_sd>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-phycore-som.dtsi b/arch/arm/dts/rk3288-phycore-som.dtsi deleted file mode 100644 index bde5910ff6..0000000000 --- a/arch/arm/dts/rk3288-phycore-som.dtsi +++ /dev/null @@ -1,506 +0,0 @@ -/* - * Device tree file for Phytec phyCORE-RK3288 SoM - * Copyright (C) 2017 PHYTEC Messtechnik GmbH - * Author: Wadim Egorov - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include -#include "rk3288.dtsi" - -/ { - model = "Phytec RK3288 phyCORE"; - compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288"; - - /* - * Set the minimum memory size here and - * let the bootloader set the real size. - */ - memory { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - aliases { - rtc0 = &i2c_rtc; - rtc1 = &rk818; - eeprom0 = &i2c_eeprom_id; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - leds: user-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&user_led>; - - user { - label = "green_led"; - gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "keep"; - }; - }; - - vdd_emmc_io: vdd-emmc-io { - compatible = "regulator-fixed"; - regulator-name = "vdd_emmc_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vdd_3v3_io>; - }; - - vdd_in_otg_out: vdd-in-otg-out { - compatible = "regulator-fixed"; - regulator-name = "vdd_in_otg_out"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vdd_misc_1v8: vdd-misc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "vdd_misc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; - operating-points = < - /* KHz uV */ - 1800000 1400000 - 1608000 1350000 - 1512000 1300000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 312000 900000 - 216000 900000 - 126000 900000 - >; -}; - -&emmc { - status = "okay"; - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - vmmc-supply = <&vdd_3v3_io>; - vqmmc-supply = <&vdd_emmc_io>; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>; - phy-handle = <&phy0>; - phy-supply = <&vdd_eth_2v5>; - phy-mode = "rgmii-id"; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; - tx_delay = <0x0>; - rx_delay = <0x0>; - - mdio0 { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - enet-phy-lane-no-swap; - }; - }; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; -}; - -&io_domains { - audio-supply = <&vdd_3v3_io>; - bb-supply = <&vdd_3v3_io>; - dvp-supply = <&vdd_3v3_io>; - flash0-supply = <&vdd_emmc_io>; - flash1-supply = <&vdd_misc_1v8>; - gpio1830-supply = <&vdd_3v3_io>; - gpio30-supply = <&vdd_3v3_io>; - lcdc-supply = <&vdd_3v3_io>; - sdcard-supply = <&vdd_io_sd>; - wifi-supply = <&vdd_3v3_io>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - rk818: pmic@1c { - status = "okay"; - compatible = "rockchip,rk818"; - reg = <0x1c>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc1-supply = <&vdd_sys>; - vcc2-supply = <&vdd_sys>; - vcc3-supply = <&vdd_sys>; - vcc4-supply = <&vdd_sys>; - boost-supply = <&vdd_in_otg_out>; - vcc6-supply = <&vdd_sys>; - vcc7-supply = <&vdd_misc_1v8>; - vcc8-supply = <&vdd_misc_1v8>; - vcc9-supply = <&vdd_3v3_io>; - vddio-supply = <&vdd_3v3_io>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1250000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_3v3_io: DCDC_REG4 { - regulator-name = "vdd_3v3_io"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd_sys: DCDC_BOOST { - regulator-name = "vdd_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <5000000>; - }; - }; - - /* vcc9 */ - vdd_sd: SWITCH_REG { - regulator-name = "vdd_sd"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - /* vcc6 */ - vdd_eth_2v5: LDO_REG2 { - regulator-name = "vdd_eth_2v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2500000>; - }; - }; - - /* vcc7 */ - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - /* vcc8 */ - vdd_1v8_lcd_ldo: LDO_REG4 { - regulator-name = "vdd_1v8_lcd_ldo"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - /* vcc8 */ - vdd_1v0_lcd: LDO_REG6 { - regulator-name = "vdd_1v0_lcd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - /* vcc7 */ - vdd_1v8_ldo: LDO_REG7 { - regulator-name = "vdd_1v8_ldo"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - /* vcc9 */ - vdd_io_sd: LDO_REG9 { - regulator-name = "vdd_io_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - }; - }; - - /* M24C32-D */ - i2c_eeprom: eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - pagesize = <32>; - }; - - /* M24C32-D Identification page */ - i2c_eeprom_id: eeprom@58 { - compatible = "atmel,24c32"; - reg = <0x58>; - pagesize = <32>; - }; - - vdd_cpu: regulator@60 { - compatible = "fcs,fan53555"; - reg = <0x60>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-enable-ramp-delay = <300>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1430000>; - regulator-ramp-delay = <8000>; - vin-supply = <&vdd_sys>; - }; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - emmc { - /* - * We run eMMC at max speed; bump up drive strength. - * We also have external pulls, so disable the internal ones. - */ - emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>; - }; - - emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>; - }; - - emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>; - }; - }; - - gmac { - phy_int: phy-int { - rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - leds { - user_led: user-led { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = ; - }; - - /* Pin for switching state between sleep and non-sleep state */ - pmic_sleep: pmic-sleep { - rockchip,pins = ; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vdd_1v8_ldo>; -}; - -&spi2 { - status = "okay"; - - serial_flash: flash@0 { - compatible = "micron,n25q128a13", "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - }; -}; - -&tsadc { - status = "okay"; - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/board/phytec/phycore_rk3288/MAINTAINERS b/board/phytec/phycore_rk3288/MAINTAINERS index 60471d478b..e3b0af98e9 100644 --- a/board/phytec/phycore_rk3288/MAINTAINERS +++ b/board/phytec/phycore_rk3288/MAINTAINERS @@ -1,9 +1,7 @@ phyCORE-RK3288 M: Wadim Egorov S: Maintained -F: arch/arm/dts/rk3288-phycore-rdk.dts F: arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi -F: arch/arm/dts/rk3288-phycore-som.dtsi F: board/phytec/phycore_rk3288 F: include/configs/phycore_rk3288.h F: configs/phycore-rk3288_defconfig diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index ce999e48df..87b259b71d 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-phycore-rdk" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-phycore-rdk" CONFIG_SPL_TEXT_BASE=0xff704000 CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -16,6 +16,8 @@ CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_PHYCORE_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_SPL_STACK=0xff718000 +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -31,8 +33,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y @@ -48,6 +48,7 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_UPSTREAM=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y