From: Tom Rini Date: Mon, 12 Jul 2021 16:42:13 +0000 (-0400) Subject: m68k: Remove M54451EVB board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a732f621bc3d05e829006281e7b421b0af3d9b94;p=u-boot.git m68k: Remove M54451EVB board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello Signed-off-by: Tom Rini --- diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index c48b8a543d..2d47141841 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -53,12 +53,6 @@ config MCF5441x select DM_SERIAL bool -config MCF5445x - select OF_CONTROL - select DM - select DM_SERIAL - bool - config MCF5227x select OF_CONTROL select DM @@ -119,10 +113,6 @@ config M54418 bool select MCF5441x -config M54451 - bool - select MCF5445x - config M52277 bool select MCF5227x @@ -187,10 +177,6 @@ config TARGET_M5373EVB bool "Support M5373EVB" select M5373 -config TARGET_M54451EVB - bool "Support M54451EVB" - select M54451 - config TARGET_AMCORE bool "Support AMCORE" select M5307 @@ -215,7 +201,6 @@ source "board/freescale/m5282evb/Kconfig" source "board/freescale/m53017evb/Kconfig" source "board/freescale/m5329evb/Kconfig" source "board/freescale/m5373evb/Kconfig" -source "board/freescale/m54451evb/Kconfig" source "board/sysam/amcore/Kconfig" source "board/sysam/stmark2/Kconfig" diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 86b36e1a40..63f18109a5 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -18,13 +18,11 @@ cpuflags-$(CONFIG_M5307) := -mcpu=5307 cpuflags-$(CONFIG_MCF5301x) := -mcpu=53015 -fPIC cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC -cpuflags-$(CONFIG_MCF5445x) := -mcpu=54455 -fPIC PLATFORM_CPPFLAGS += $(cpuflags-y) ldflags-$(CONFIG_MCF5441x) := --got=single -ldflags-$(CONFIG_MCF5445x) := --got=single ifneq (,$(findstring -linux-,$(shell $(CC) --version))) ifneq (,$(findstring GOT,$(shell $(LD) --help))) diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c index 9deab51d07..9b3f9f0fe1 100644 --- a/arch/m68k/cpu/mcf5445x/cpu_init.c +++ b/arch/m68k/cpu/mcf5445x/cpu_init.c @@ -73,13 +73,6 @@ void cfspi_port_conf(void) { gpio_t *gpio = (gpio_t *)MMAP_GPIO; -#ifdef CONFIG_MCF5445x - out_8(&gpio->par_dspi, - GPIO_PAR_DSPI_SIN_SIN | - GPIO_PAR_DSPI_SOUT_SOUT | - GPIO_PAR_DSPI_SCK_SCK); -#endif - #ifdef CONFIG_MCF5441x pm_t *pm = (pm_t *)MMAP_PM; @@ -212,36 +205,6 @@ void cpu_init_f(void) #endif #endif /* CONFIG_MCF5441x */ -#ifdef CONFIG_MCF5445x - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); - - /* FlexBus */ - out_8(&gpio->par_be, - GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | - GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); - out_8(&gpio->par_fbctl, - GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | - GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); - -#ifdef CONFIG_CF_SPI - cfspi_port_conf(); -#endif - -#ifdef CONFIG_SYS_FSL_I2C - out_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); -#endif -#endif /* CONFIG_MCF5445x */ - /* FlexBus Chipselect */ init_fbcs(); @@ -365,40 +328,6 @@ void uart_port_conf(int port) GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD); break; #endif -#ifdef CONFIG_MCF5445x - case 0: - clrbits_8(&gpio->par_uart, - GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); - setbits_8(&gpio->par_uart, - GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); - break; - case 1: -#ifdef CONFIG_SYS_UART1_PRI_GPIO - clrbits_8(&gpio->par_uart, - GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); - setbits_8(&gpio->par_uart, - GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); -#elif defined(CONFIG_SYS_UART1_ALT1_GPIO) - clrbits_be16(&gpio->par_ssi, - ~(GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK)); - setbits_be16(&gpio->par_ssi, - GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD); -#endif - break; - case 2: -#if defined(CONFIG_SYS_UART2_ALT1_GPIO) - clrbits_8(&gpio->par_timer, - ~(GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK)); - setbits_8(&gpio->par_timer, - GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD); -#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) - clrbits_8(&gpio->par_timer, - ~(GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK)); - setbits_8(&gpio->par_timer, - GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); -#endif - break; -#endif /* CONFIG_MCF5445x */ } } @@ -411,46 +340,6 @@ int fecpin_setclear(fec_info_t *info, int setclear) if (fec_get_base_addr(0, &fec0_base)) return -1; -#ifdef CONFIG_MCF5445x - if (setclear) { -#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY - if (info->iobase == fec0_base) - setbits_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_MDC0_MDC0 | - GPIO_PAR_FECI2C_MDIO0_MDIO0); - else - setbits_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_MDC1_MDC1 | - GPIO_PAR_FECI2C_MDIO1_MDIO1); -#else - setbits_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); -#endif - - if (info->iobase == fec0_base) - setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_RMII_GPIO); - else - setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_RMII_ATA); - } else { - clrbits_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == fec0_base) { -#ifdef CONFIG_SYS_FEC_FULL_MII - setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_MII); -#else - clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC0_UNMASK); -#endif - } else { -#ifdef CONFIG_SYS_FEC_FULL_MII - setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_MII); -#else - clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC1_UNMASK); -#endif - } - } -#endif /* CONFIG_MCF5445x */ - #ifdef CONFIG_MCF5441x if (setclear) { out_8(&gpio->par_fec, 0x03); diff --git a/arch/m68k/cpu/mcf5445x/dspi.c b/arch/m68k/cpu/mcf5445x/dspi.c index b0e2f2cb01..456af171a4 100644 --- a/arch/m68k/cpu/mcf5445x/dspi.c +++ b/arch/m68k/cpu/mcf5445x/dspi.c @@ -15,30 +15,6 @@ void dspi_chip_select(int cs) { struct gpio *gpio = (struct gpio *)MMAP_GPIO; -#ifdef CONFIG_MCF5445x - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 1: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1); - break; - case 2: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2); - break; - case 3: - clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK); - setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3); - break; - case 5: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); - break; - } -#endif #ifdef CONFIG_MCF5441x switch (cs) { case 0: @@ -61,25 +37,6 @@ void dspi_chip_unselect(int cs) { struct gpio *gpio = (struct gpio *)MMAP_GPIO; -#ifdef CONFIG_MCF5445x - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 1: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1); - break; - case 2: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2); - break; - case 3: - clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK); - break; - case 5: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); - break; - } -#endif #ifdef CONFIG_MCF5441x if (cs == 1) clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c index 4809bb49d1..eb73da68c6 100644 --- a/arch/m68k/cpu/mcf5445x/speed.c +++ b/arch/m68k/cpu/mcf5445x/speed.c @@ -42,11 +42,6 @@ void clock_enter_limp(int lpdiv) /* Round divider down to nearest power of two */ for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; -#ifdef CONFIG_MCF5445x - /* Apply the divider to the system clock */ - clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); -#endif - /* Enable Limp Mode */ setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); } @@ -127,135 +122,12 @@ void setup_5441x_clocks(void) } #endif -#ifdef CONFIG_MCF5445x -void setup_5445x_clocks(void) -{ - ccm_t *ccm = (ccm_t *)MMAP_CCM; - pll_t *pll = (pll_t *)MMAP_PLL; - int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; - int pllmult_pci[] = { 12, 6, 16, 8 }; - int vco = 0, temp, fbtemp, pcrvalue; - int *pPllmult = NULL; - u16 fbpll_mask; -#ifdef CONFIG_PCI - int bPci; -#endif - - u8 bootmode; - - /* To determine PCI is present or not */ - if (((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || - ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { - pPllmult = &pllmult_pci[0]; - fbpll_mask = 3; /* 11b */ -#ifdef CONFIG_PCI - bPci = 1; -#endif - } else { - pPllmult = &pllmult_nopci[0]; - fbpll_mask = 7; /* 111b */ -#ifdef CONFIG_PCI - gd->pci_clk = 0; - bPci = 0; -#endif - } - -#ifdef CONFIG_M54451EVB - /* No external logic to read the bootmode, hard coded from built */ -#ifdef CONFIG_CF_SBF - bootmode = 3; -#else - bootmode = 2; - - /* default value is 16 mul, set to 20 mul */ - pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF) | 0x14000000; - out_be32(&pll->pcr, pcrvalue); - while ((in_be32(&pll->psr) & PLL_PSR_LOCK) != PLL_PSR_LOCK) - ; -#endif -#endif - - if (bootmode == 0) { - /* RCON mode */ - vco = pPllmult[ccm->rcon & fbpll_mask] * CONFIG_SYS_INPUT_CLKSRC; - - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* invaild range, re-set in PCR */ - int temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - int i, j, bus; - - j = (in_be32(&pll->pcr) & 0xFF000000) >> 24; - for (i = j; i < 0xFF; i++) { - vco = i * CONFIG_SYS_INPUT_CLKSRC; - if (vco >= CLOCK_PLL_FVCO_MIN) { - bus = vco / temp; - if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) - continue; - else - break; - } - } - pcrvalue = in_be32(&pll->pcr) & 0x00FF00FF; - fbtemp = ((i - 1) << 8) | ((i - 1) << 12); - pcrvalue |= ((i << 24) | fbtemp); - - out_be32(&pll->pcr, pcrvalue); - } - gd->arch.vco_clk = vco; /* Vco clock */ - } else if (bootmode == 2) { - /* Normal mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* Default value */ - pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF); - pcrvalue |= pPllmult[in_be16(&ccm->ccr) & fbpll_mask] << 24; - out_be32(&pll->pcr, pcrvalue); - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - } - gd->arch.vco_clk = vco; /* Vco clock */ - } else if (bootmode == 3) { - /* serial mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - gd->arch.vco_clk = vco; /* Vco clock */ - } - - if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { - /* Limp mode */ - } else { - gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ - - temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1; - gd->cpu_clk = vco / temp; /* cpu clock */ - - temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - gd->bus_clk = vco / temp; /* bus clock */ - - temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; - gd->arch.flb_clk = vco / temp; /* FlexBus clock */ - -#ifdef CONFIG_PCI - if (bPci) { - temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; - gd->pci_clk = vco / temp; /* PCI clock */ - } -#endif - } - -#ifdef CONFIG_SYS_I2C_FSL - gd->arch.i2c1_clk = gd->bus_clk; -#endif -} -#endif - /* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks(void) { #ifdef CONFIG_MCF5441x setup_5441x_clocks(); #endif -#ifdef CONFIG_MCF5445x - setup_5445x_clocks(); -#endif #ifdef CONFIG_SYS_FSL_I2C gd->arch.i2c1_clk = gd->bus_clk; diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 80eb287151..7007d78c83 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -202,10 +202,6 @@ asm_dspi_init: move.b #0x80, (%a2) #endif -#ifdef CONFIG_MCF5445x - move.l #0xFC0A4063, %a0 - move.b #0x7F, (%a0) -#endif /* Configure DSPI module */ move.l #0xFC05C000, %a0 move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ @@ -214,9 +210,6 @@ asm_dspi_init: #ifdef CONFIG_MCF5441x move.l #0x3E000016, (%a0) #endif -#ifdef CONFIG_MCF5445x - move.l #0x3E000011, (%a0) -#endif move.l #0xFC05C034, %a2 /* dtfr */ move.l #0xFC05C03B, %a3 /* drfr */ diff --git a/arch/m68k/dts/M54451EVB.dts b/arch/m68k/dts/M54451EVB.dts deleted file mode 100644 index b81d37a938..0000000000 --- a/arch/m68k/dts/M54451EVB.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Angelo Dureghello - */ - -/dts-v1/; -/include/ "mcf5445x.dtsi" - -/ { - model = "Freescale M54451EVB"; - compatible = "fsl,M54451EVB"; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&uart0 { - u-boot,dm-pre-reloc; - status = "okay"; -}; - -&dspi0 { - status = "okay"; -}; - -&fec0 { - status = "okay"; -}; - -&fec1 { - status = "okay"; -}; diff --git a/arch/m68k/dts/M54451EVB_stmicro.dts b/arch/m68k/dts/M54451EVB_stmicro.dts deleted file mode 100644 index 6645b58065..0000000000 --- a/arch/m68k/dts/M54451EVB_stmicro.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Angelo Dureghello - */ - -/dts-v1/; -/include/ "mcf5445x.dtsi" - -/ { - model = "Freescale M54451EVB_stmicro"; - compatible = "fsl,M54451EVB"; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&uart0 { - u-boot,dm-pre-reloc; - status = "okay"; -}; - -&dspi0 { - status = "okay"; -}; - -&fec0 { - status = "okay"; -}; - -&fec1 { - status = "okay"; -}; diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile index 829edb8dbc..49618e64fe 100644 --- a/arch/m68k/dts/Makefile +++ b/arch/m68k/dts/Makefile @@ -17,8 +17,6 @@ dtb-$(CONFIG_TARGET_ASTRO_MCF5373L) += astro_mcf5373l.dtb dtb-$(CONFIG_TARGET_M53017EVB) += M53017EVB.dtb dtb-$(CONFIG_TARGET_M5329EVB) += M5329AFEE.dtb M5329BFEE.dtb dtb-$(CONFIG_TARGET_M5373EVB) += M5373EVB.dtb -dtb-$(CONFIG_TARGET_M54451EVB) += M54451EVB.dtb \ - M54451EVB_stmicro.dtb dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb diff --git a/arch/m68k/dts/mcf5445x.dtsi b/arch/m68k/dts/mcf5445x.dtsi deleted file mode 100644 index b7ecc99c09..0000000000 --- a/arch/m68k/dts/mcf5445x.dtsi +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Angelo Dureghello - */ - -/ { - compatible = "fsl,mcf5445x"; - - aliases { - serial0 = &uart0; - spi0 = &dspi0; - fec0 = &fec0; - fec1 = &fec1; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - uart0: uart@fc060000 { - compatible = "fsl,mcf-uart"; - reg = <0xfc060000 0x40>; - status = "disabled"; - }; - - uart1: uart@fc064000 { - compatible = "fsl,mcf-uart"; - reg = <0xfc064000 0x40>; - status = "disabled"; - }; - - uart2: uart@fc068000 { - compatible = "fsl,mcf-uart"; - reg = <0xfc068000 0x40>; - status = "disabled"; - }; - - dspi0: dspi@fc05c000 { - compatible = "fsl,mcf-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfc05c000 0x100>; - spi-max-frequency = <50000000>; - num-cs = <4>; - spi-mode = <0>; - status = "disabled"; - }; - - fec0: ethernet@fc030000 { - compatible = "fsl,mcf-fec"; - reg = <0xfc030000 0x4000>; - mii-base = <0>; - max-speed = <100>; - timeout-loop = <50000>; - status = "disabled"; - }; - - fec1: ethernet@fc034000 { - compatible = "fsl,mcf-fec"; - reg = <0xfc034000 0x4000>; - mii-base = <1>; - max-speed = <100>; - timeout-loop = <50000>; - status = "disabled"; - }; - }; -}; diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index fabec0ae92..1c04d6df7c 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -19,9 +19,7 @@ #define CONFIG_CF_V3 #endif -#if defined(CONFIG_MCF5445x) -#define CONFIG_CF_V4 -#elif defined(CONFIG_MCF5441x) +#if defined(CONFIG_MCF5441x) #define CONFIG_CF_V4E /* Four Extra ACRn */ #endif diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index 07d9745b14..81837a7c16 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -330,39 +330,6 @@ #endif /* CONFIG_M54418 */ -#if defined(CONFIG_M54451) -#include -#include - -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) - -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) - -#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC) - -/* Timer */ -#ifdef CONFIG_MCFTMR -#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0) -#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1) -#define CONFIG_SYS_TMRPND_REG (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0) -#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1) -#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33) -#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK) -#define CONFIG_SYS_TMRINTR_PRI (6) -#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) -#endif - -#define CONFIG_SYS_INTR_BASE (MMAP_INTC0) -#define CONFIG_SYS_NUM_IRQS (128) - -#ifdef CONFIG_PCI -#define CONFIG_SYS_PCI_BAR0 (CONFIG_SYS_MBAR) -#define CONFIG_SYS_PCI_BAR5 (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_PCI_TBATR0 (CONFIG_SYS_MBAR) -#define CONFIG_SYS_PCI_TBATR5 (CONFIG_SYS_SDRAM_BASE) -#endif -#endif /* CONFIG_M54451 */ - #ifdef CONFIG_M547x #include #include diff --git a/arch/m68k/include/asm/immap_5445x.h b/arch/m68k/include/asm/immap_5445x.h deleted file mode 100644 index 3111d00d3e..0000000000 --- a/arch/m68k/include/asm/immap_5445x.h +++ /dev/null @@ -1,335 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * MCF5445x Internal Memory Map - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#ifndef __IMMAP_5445X__ -#define __IMMAP_5445X__ - -/* Module Base Addresses */ -#define MMAP_SCM1 0xFC000000 -#define MMAP_XBS 0xFC004000 -#define MMAP_FBCS 0xFC008000 -#define MMAP_FEC0 0xFC030000 -#define MMAP_FEC1 0xFC034000 -#define MMAP_RTC 0xFC03C000 -#define MMAP_SCM2 0xFC040000 -#define MMAP_EDMA 0xFC044000 -#define MMAP_INTC0 0xFC048000 -#define MMAP_INTC1 0xFC04C000 -#define MMAP_IACK 0xFC054000 -#define MMAP_I2C 0xFC058000 -#define MMAP_DSPI 0xFC05C000 -#define MMAP_UART0 0xFC060000 -#define MMAP_UART1 0xFC064000 -#define MMAP_UART2 0xFC068000 -#define MMAP_DTMR0 0xFC070000 -#define MMAP_DTMR1 0xFC074000 -#define MMAP_DTMR2 0xFC078000 -#define MMAP_DTMR3 0xFC07C000 -#define MMAP_PIT0 0xFC080000 -#define MMAP_PIT1 0xFC084000 -#define MMAP_PIT2 0xFC088000 -#define MMAP_PIT3 0xFC08C000 -#define MMAP_EPORT 0xFC094000 -#define MMAP_WTM 0xFC098000 -#define MMAP_SBF 0xFC0A0000 -#define MMAP_RCM 0xFC0A0000 -#define MMAP_CCM 0xFC0A0000 -#define MMAP_GPIO 0xFC0A4000 -#define MMAP_PCI 0xFC0A8000 -#define MMAP_PCIARB 0xFC0AC000 -#define MMAP_RNG 0xFC0B4000 -#define MMAP_SDRAM 0xFC0B8000 -#define MMAP_SSI 0xFC0BC000 -#define MMAP_PLL 0xFC0C4000 -#define MMAP_ATA 0x90000000 -#define MMAP_USBHW 0xFC0B0000 -#define MMAP_USBCAPS 0xFC0B0100 -#define MMAP_USBEHCI 0xFC0B0140 -#define MMAP_USBOTG 0xFC0B01A0 - -#include -#include -#include -#include -#include -#include -#include -#include - -/* Watchdog Timer Modules (WTM) */ -typedef struct wtm { - u16 wcr; - u16 wmr; - u16 wcntr; - u16 wsr; -} wtm_t; - -/* Serial Boot Facility (SBF) */ -typedef struct sbf { - u8 resv0[0x18]; - u16 sbfsr; /* Serial Boot Facility Status Register */ - u8 resv1[0x6]; - u16 sbfcr; /* Serial Boot Facility Control Register */ -} sbf_t; - -/* Reset Controller Module (RCM) */ -typedef struct rcm { - u8 rcr; - u8 rsr; -} rcm_t; - -/* Chip Configuration Module (CCM) */ -typedef struct ccm { - u8 ccm_resv0[0x4]; - u16 ccr; /* Chip Configuration Register (256 TEPBGA, Read-only) */ - u8 resv1[0x2]; - u16 rcon; /* Reset Configuration (256 TEPBGA, Read-only) */ - u16 cir; /* Chip Identification Register (Read-only) */ - u8 resv2[0x4]; - u16 misccr; /* Miscellaneous Control Register */ - u16 cdr; /* Clock Divider Register */ - u16 uocsr; /* USB On-the-Go Controller Status Register */ -} ccm_t; - -/* General Purpose I/O Module (GPIO) */ -typedef struct gpio { - u8 podr_fec0h; /* FEC0 High Port Output Data Register */ - u8 podr_fec0l; /* FEC0 Low Port Output Data Register */ - u8 podr_ssi; /* SSI Port Output Data Register */ - u8 podr_fbctl; /* Flexbus Control Port Output Data Register */ - u8 podr_be; /* Flexbus Byte Enable Port Output Data Register */ - u8 podr_cs; /* Flexbus Chip-Select Port Output Data Register */ - u8 podr_dma; /* DMA Port Output Data Register */ - u8 podr_feci2c; /* FEC1 / I2C Port Output Data Register */ - u8 resv0[0x1]; - u8 podr_uart; /* UART Port Output Data Register */ - u8 podr_dspi; /* DSPI Port Output Data Register */ - u8 podr_timer; /* Timer Port Output Data Register */ - u8 podr_pci; /* PCI Port Output Data Register */ - u8 podr_usb; /* USB Port Output Data Register */ - u8 podr_atah; /* ATA High Port Output Data Register */ - u8 podr_atal; /* ATA Low Port Output Data Register */ - u8 podr_fec1h; /* FEC1 High Port Output Data Register */ - u8 podr_fec1l; /* FEC1 Low Port Output Data Register */ - u8 resv1[0x2]; - u8 podr_fbadh; /* Flexbus AD High Port Output Data Register */ - u8 podr_fbadmh; /* Flexbus AD Med-High Port Output Data Register */ - u8 podr_fbadml; /* Flexbus AD Med-Low Port Output Data Register */ - u8 podr_fbadl; /* Flexbus AD Low Port Output Data Register */ - u8 pddr_fec0h; /* FEC0 High Port Data Direction Register */ - u8 pddr_fec0l; /* FEC0 Low Port Data Direction Register */ - u8 pddr_ssi; /* SSI Port Data Direction Register */ - u8 pddr_fbctl; /* Flexbus Control Port Data Direction Register */ - u8 pddr_be; /* Flexbus Byte Enable Port Data Direction Register */ - u8 pddr_cs; /* Flexbus Chip-Select Port Data Direction Register */ - u8 pddr_dma; /* DMA Port Data Direction Register */ - u8 pddr_feci2c; /* FEC1 / I2C Port Data Direction Register */ - u8 resv2[0x1]; - u8 pddr_uart; /* UART Port Data Direction Register */ - u8 pddr_dspi; /* DSPI Port Data Direction Register */ - u8 pddr_timer; /* Timer Port Data Direction Register */ - u8 pddr_pci; /* PCI Port Data Direction Register */ - u8 pddr_usb; /* USB Port Data Direction Register */ - u8 pddr_atah; /* ATA High Port Data Direction Register */ - u8 pddr_atal; /* ATA Low Port Data Direction Register */ - u8 pddr_fec1h; /* FEC1 High Port Data Direction Register */ - u8 pddr_fec1l; /* FEC1 Low Port Data Direction Register */ - u8 resv3[0x2]; - u8 pddr_fbadh; /* Flexbus AD High Port Data Direction Register */ - u8 pddr_fbadmh; /* Flexbus AD Med-High Port Data Direction Register */ - u8 pddr_fbadml; /* Flexbus AD Med-Low Port Data Direction Register */ - u8 pddr_fbadl; /* Flexbus AD Low Port Data Direction Register */ - u8 ppdsdr_fec0h; /* FEC0 High Port Pin Data/Set Data Register */ - u8 ppdsdr_fec0l; /* FEC0 Low Port Clear Output Data Register */ - u8 ppdsdr_ssi; /* SSI Port Pin Data/Set Data Register */ - u8 ppdsdr_fbctl; /* Flexbus Control Port Pin Data/Set Data Register */ - u8 ppdsdr_be; /* Flexbus Byte Enable Port Pin Data/Set Data Register */ - u8 ppdsdr_cs; /* Flexbus Chip-Select Port Pin Data/Set Data Register */ - u8 ppdsdr_dma; /* DMA Port Pin Data/Set Data Register */ - u8 ppdsdr_feci2c; /* FEC1 / I2C Port Pin Data/Set Data Register */ - u8 resv4[0x1]; - u8 ppdsdr_uart; /* UART Port Pin Data/Set Data Register */ - u8 ppdsdr_dspi; /* DSPI Port Pin Data/Set Data Register */ - u8 ppdsdr_timer; /* FTimer Port Pin Data/Set Data Register */ - u8 ppdsdr_pci; /* PCI Port Pin Data/Set Data Register */ - u8 ppdsdr_usb; /* USB Port Pin Data/Set Data Register */ - u8 ppdsdr_atah; /* ATA High Port Pin Data/Set Data Register */ - u8 ppdsdr_atal; /* ATA Low Port Pin Data/Set Data Register */ - u8 ppdsdr_fec1h; /* FEC1 High Port Pin Data/Set Data Register */ - u8 ppdsdr_fec1l; /* FEC1 Low Port Pin Data/Set Data Register */ - u8 resv5[0x2]; - u8 ppdsdr_fbadh; /* Flexbus AD High Port Pin Data/Set Data Register */ - u8 ppdsdr_fbadmh; /* Flexbus AD Med-High Port Pin Data/Set Data Register */ - u8 ppdsdr_fbadml; /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ - u8 ppdsdr_fbadl; /* Flexbus AD Low Port Pin Data/Set Data Register */ - u8 pclrr_fec0h; /* FEC0 High Port Clear Output Data Register */ - u8 pclrr_fec0l; /* FEC0 Low Port Pin Data/Set Data Register */ - u8 pclrr_ssi; /* SSI Port Clear Output Data Register */ - u8 pclrr_fbctl; /* Flexbus Control Port Clear Output Data Register */ - u8 pclrr_be; /* Flexbus Byte Enable Port Clear Output Data Register */ - u8 pclrr_cs; /* Flexbus Chip-Select Port Clear Output Data Register */ - u8 pclrr_dma; /* DMA Port Clear Output Data Register */ - u8 pclrr_feci2c; /* FEC1 / I2C Port Clear Output Data Register */ - u8 resv6[0x1]; - u8 pclrr_uart; /* UART Port Clear Output Data Register */ - u8 pclrr_dspi; /* DSPI Port Clear Output Data Register */ - u8 pclrr_timer; /* Timer Port Clear Output Data Register */ - u8 pclrr_pci; /* PCI Port Clear Output Data Register */ - u8 pclrr_usb; /* USB Port Clear Output Data Register */ - u8 pclrr_atah; /* ATA High Port Clear Output Data Register */ - u8 pclrr_atal; /* ATA Low Port Clear Output Data Register */ - u8 pclrr_fec1h; /* FEC1 High Port Clear Output Data Register */ - u8 pclrr_fec1l; /* FEC1 Low Port Clear Output Data Register */ - u8 resv7[0x2]; - u8 pclrr_fbadh; /* Flexbus AD High Port Clear Output Data Register */ - u8 pclrr_fbadmh; /* Flexbus AD Med-High Port Clear Output Data Register */ - u8 pclrr_fbadml; /* Flexbus AD Med-Low Port Clear Output Data Register */ - u8 pclrr_fbadl; /* Flexbus AD Low Port Clear Output Data Register */ - u8 par_fec; /* FEC Pin Assignment Register */ - u8 par_dma; /* DMA Pin Assignment Register */ - u8 par_fbctl; /* Flexbus Control Pin Assignment Register */ - u8 par_dspi; /* DSPI Pin Assignment Register */ - u8 par_be; /* Flexbus Byte-Enable Pin Assignment Register */ - u8 par_cs; /* Flexbus Chip-Select Pin Assignment Register */ - u8 par_timer; /* Time Pin Assignment Register */ - u8 par_usb; /* USB Pin Assignment Register */ - u8 resv8[0x1]; - u8 par_uart; /* UART Pin Assignment Register */ - u16 par_feci2c; /* FEC / I2C Pin Assignment Register */ - u16 par_ssi; /* SSI Pin Assignment Register */ - u16 par_ata; /* ATA Pin Assignment Register */ - u8 par_irq; /* IRQ Pin Assignment Register */ - u8 resv9[0x1]; - u16 par_pci; /* PCI Pin Assignment Register */ - u8 mscr_sdram; /* SDRAM Mode Select Control Register */ - u8 mscr_pci; /* PCI Mode Select Control Register */ - u8 resv10[0x2]; - u8 dscr_i2c; /* I2C Drive Strength Control Register */ - u8 dscr_flexbus; /* FLEXBUS Drive Strength Control Register */ - u8 dscr_fec; /* FEC Drive Strength Control Register */ - u8 dscr_uart; /* UART Drive Strength Control Register */ - u8 dscr_dspi; /* DSPI Drive Strength Control Register */ - u8 dscr_timer; /* TIMER Drive Strength Control Register */ - u8 dscr_ssi; /* SSI Drive Strength Control Register */ - u8 dscr_dma; /* DMA Drive Strength Control Register */ - u8 dscr_debug; /* DEBUG Drive Strength Control Register */ - u8 dscr_reset; /* RESET Drive Strength Control Register */ - u8 dscr_irq; /* IRQ Drive Strength Control Register */ - u8 dscr_usb; /* USB Drive Strength Control Register */ - u8 dscr_ata; /* ATA Drive Strength Control Register */ -} gpio_t; - -/* SDRAM Controller (SDRAMC) */ -typedef struct sdramc { - u32 sdmr; /* SDRAM Mode/Extended Mode Register */ - u32 sdcr; /* SDRAM Control Register */ - u32 sdcfg1; /* SDRAM Configuration Register 1 */ - u32 sdcfg2; /* SDRAM Chip Select Register */ - u8 resv0[0x100]; - u32 sdcs0; /* SDRAM Mode/Extended Mode Register */ - u32 sdcs1; /* SDRAM Mode/Extended Mode Register */ -} sdramc_t; - -/* Phase Locked Loop (PLL) */ -typedef struct pll { - u32 pcr; /* PLL Control Register */ - u32 psr; /* PLL Status Register */ -} pll_t; - -typedef struct pci { - u32 idr; /* 0x00 Device Id / Vendor Id Register */ - u32 scr; /* 0x04 Status / command Register */ - u32 ccrir; /* 0x08 Class Code / Revision Id Register */ - u32 cr1; /* 0x0c Configuration 1 Register */ - u32 bar0; /* 0x10 Base address register 0 Register */ - u32 bar1; /* 0x14 Base address register 1 Register */ - u32 bar2; /* 0x18 Base address register 2 Register */ - u32 bar3; /* 0x1c Base address register 3 Register */ - u32 bar4; /* 0x20 Base address register 4 Register */ - u32 bar5; /* 0x24 Base address register 5 Register */ - u32 ccpr; /* 0x28 Cardbus CIS Pointer Register */ - u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID Register */ - u32 erbar; /* 0x30 Expansion ROM Base Address Register */ - u32 cpr; /* 0x34 Capabilities Pointer Register */ - u32 rsvd1; /* 0x38 */ - u32 cr2; /* 0x3c Configuration Register 2 */ - u32 rsvd2[8]; /* 0x40 - 0x5f */ - - /* General control / status registers */ - u32 gscr; /* 0x60 Global Status / Control Register */ - u32 tbatr0a; /* 0x64 Target Base Address Translation Register 0 */ - u32 tbatr1a; /* 0x68 Target Base Address Translation Register 1 */ - u32 tcr1; /* 0x6c Target Control 1 Register */ - u32 iw0btar; /* 0x70 Initiator Window 0 Base/Translation addr */ - u32 iw1btar; /* 0x74 Initiator Window 1 Base/Translation addr */ - u32 iw2btar; /* 0x78 Initiator Window 2 Base/Translation addr */ - u32 rsvd3; /* 0x7c */ - u32 iwcr; /* 0x80 Initiator Window Configuration Register */ - u32 icr; /* 0x84 Initiator Control Register */ - u32 isr; /* 0x88 Initiator Status Register */ - u32 tcr2; /* 0x8c Target Control 2 Register */ - u32 tbatr0; /* 0x90 Target Base Address Translation Register 0 */ - u32 tbatr1; /* 0x94 Target Base Address Translation Register 1 */ - u32 tbatr2; /* 0x98 Target Base Address Translation Register 2 */ - u32 tbatr3; /* 0x9c Target Base Address Translation Register 3 */ - u32 tbatr4; /* 0xa0 Target Base Address Translation Register 4 */ - u32 tbatr5; /* 0xa4 Target Base Address Translation Register 5 */ - u32 intr; /* 0xa8 Interrupt Register */ - u32 rsvd4[19]; /* 0xac - 0xf7 */ - u32 car; /* 0xf8 Configuration Address Register */ -} pci_t; - -typedef struct pci_arbiter { - /* Pci Arbiter Registers */ - union { - u32 acr; /* Arbiter Control Register */ - u32 asr; /* Arbiter Status Register */ - }; -} pciarb_t; - -/* Register read/write struct */ -typedef struct scm1 { - u32 mpr; /* 0x00 Master Privilege Register */ - u32 rsvd1[7]; - u32 pacra; /* 0x20 Peripheral Access Control Register A */ - u32 pacrb; /* 0x24 Peripheral Access Control Register B */ - u32 pacrc; /* 0x28 Peripheral Access Control Register C */ - u32 pacrd; /* 0x2C Peripheral Access Control Register D */ - u32 rsvd2[4]; - u32 pacre; /* 0x40 Peripheral Access Control Register E */ - u32 pacrf; /* 0x44 Peripheral Access Control Register F */ - u32 pacrg; /* 0x48 Peripheral Access Control Register G */ -} scm1_t; - -typedef struct scm2 { - u8 rsvd1[19]; /* 0x00 - 0x12 */ - u8 wcr; /* 0x13 */ - u16 rsvd2; /* 0x14 - 0x15 */ - u16 cwcr; /* 0x16 */ - u8 rsvd3[3]; /* 0x18 - 0x1A */ - u8 cwsr; /* 0x1B */ - u8 rsvd4[3]; /* 0x1C - 0x1E */ - u8 scmisr; /* 0x1F */ - u32 rsvd5; /* 0x20 - 0x23 */ - u8 bcr; /* 0x24 */ - u8 rsvd6[74]; /* 0x25 - 0x6F */ - u32 cfadr; /* 0x70 */ - u8 rsvd7; /* 0x74 */ - u8 cfier; /* 0x75 */ - u8 cfloc; /* 0x76 */ - u8 cfatr; /* 0x77 */ - u32 rsvd8; /* 0x78 - 0x7B */ - u32 cfdtr; /* 0x7C */ -} scm2_t; - -typedef struct rtcex { - u32 rsvd1[3]; - u32 gocu; - u32 gocl; -} rtcex_t; -#endif /* __IMMAP_5445X__ */ diff --git a/arch/m68k/include/asm/m5445x.h b/arch/m68k/include/asm/m5445x.h deleted file mode 100644 index 498c2255f6..0000000000 --- a/arch/m68k/include/asm/m5445x.h +++ /dev/null @@ -1,888 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * MCF5445x Internal Memory Map - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#ifndef __MCF5445X__ -#define __MCF5445X__ - -/********************************************************************* -* Interrupt Controller (INTC) -*********************************************************************/ -#define INT0_LO_RSVD0 (0) -#define INT0_LO_EPORT1 (1) -#define INT0_LO_EPORT2 (2) -#define INT0_LO_EPORT3 (3) -#define INT0_LO_EPORT4 (4) -#define INT0_LO_EPORT5 (5) -#define INT0_LO_EPORT6 (6) -#define INT0_LO_EPORT7 (7) -#define INT0_LO_EDMA_00 (8) -#define INT0_LO_EDMA_01 (9) -#define INT0_LO_EDMA_02 (10) -#define INT0_LO_EDMA_03 (11) -#define INT0_LO_EDMA_04 (12) -#define INT0_LO_EDMA_05 (13) -#define INT0_LO_EDMA_06 (14) -#define INT0_LO_EDMA_07 (15) -#define INT0_LO_EDMA_08 (16) -#define INT0_LO_EDMA_09 (17) -#define INT0_LO_EDMA_10 (18) -#define INT0_LO_EDMA_11 (19) -#define INT0_LO_EDMA_12 (20) -#define INT0_LO_EDMA_13 (21) -#define INT0_LO_EDMA_14 (22) -#define INT0_LO_EDMA_15 (23) -#define INT0_LO_EDMA_ERR (24) -#define INT0_LO_SCM (25) -#define INT0_LO_UART0 (26) -#define INT0_LO_UART1 (27) -#define INT0_LO_UART2 (28) -#define INT0_LO_RSVD1 (29) -#define INT0_LO_I2C (30) -#define INT0_LO_QSPI (31) -#define INT0_HI_DTMR0 (32) -#define INT0_HI_DTMR1 (33) -#define INT0_HI_DTMR2 (34) -#define INT0_HI_DTMR3 (35) -#define INT0_HI_FEC0_TXF (36) -#define INT0_HI_FEC0_TXB (37) -#define INT0_HI_FEC0_UN (38) -#define INT0_HI_FEC0_RL (39) -#define INT0_HI_FEC0_RXF (40) -#define INT0_HI_FEC0_RXB (41) -#define INT0_HI_FEC0_MII (42) -#define INT0_HI_FEC0_LC (43) -#define INT0_HI_FEC0_HBERR (44) -#define INT0_HI_FEC0_GRA (45) -#define INT0_HI_FEC0_EBERR (46) -#define INT0_HI_FEC0_BABT (47) -#define INT0_HI_FEC0_BABR (48) -#define INT0_HI_FEC1_TXF (49) -#define INT0_HI_FEC1_TXB (50) -#define INT0_HI_FEC1_UN (51) -#define INT0_HI_FEC1_RL (52) -#define INT0_HI_FEC1_RXF (53) -#define INT0_HI_FEC1_RXB (54) -#define INT0_HI_FEC1_MII (55) -#define INT0_HI_FEC1_LC (56) -#define INT0_HI_FEC1_HBERR (57) -#define INT0_HI_FEC1_GRA (58) -#define INT0_HI_FEC1_EBERR (59) -#define INT0_HI_FEC1_BABT (60) -#define INT0_HI_FEC1_BABR (61) -#define INT0_HI_SCMIR (62) -#define INT0_HI_RTC_ISR (63) - -#define INT1_HI_DSPI_EOQF (33) -#define INT1_HI_DSPI_TFFF (34) -#define INT1_HI_DSPI_TCF (35) -#define INT1_HI_DSPI_TFUF (36) -#define INT1_HI_DSPI_RFDF (37) -#define INT1_HI_DSPI_RFOF (38) -#define INT1_HI_DSPI_RFOF_TFUF (39) -#define INT1_HI_RNG_EI (40) -#define INT1_HI_PIT0_PIF (43) -#define INT1_HI_PIT1_PIF (44) -#define INT1_HI_PIT2_PIF (45) -#define INT1_HI_PIT3_PIF (46) -#define INT1_HI_USBOTG_USBSTS (47) -#define INT1_HI_SSI_ISR (49) -#define INT1_HI_CCM_UOCSR (53) -#define INT1_HI_ATA_ISR (54) -#define INT1_HI_PCI_SCR (55) -#define INT1_HI_PCI_ASR (56) -#define INT1_HI_PLL_LOCKS (57) - -/********************************************************************* -* Watchdog Timer Modules (WTM) -*********************************************************************/ - -/* Bit definitions and macros for WCR */ -#define WTM_WCR_EN (0x0001) -#define WTM_WCR_HALTED (0x0002) -#define WTM_WCR_DOZE (0x0004) -#define WTM_WCR_WAIT (0x0008) - -/********************************************************************* -* Serial Boot Facility (SBF) -*********************************************************************/ - -/* Bit definitions and macros for SBFCR */ -#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) /* Boot loader clock divider */ -#define SBF_SBFCR_FR (0x0010) /* Fast read */ - -/********************************************************************* -* Reset Controller Module (RCM) -*********************************************************************/ - -/* Bit definitions and macros for RCR */ -#define RCM_RCR_FRCRSTOUT (0x40) -#define RCM_RCR_SOFTRST (0x80) - -/* Bit definitions and macros for RSR */ -#define RCM_RSR_LOL (0x01) -#define RCM_RSR_WDR_CORE (0x02) -#define RCM_RSR_EXT (0x04) -#define RCM_RSR_POR (0x08) -#define RCM_RSR_SOFT (0x20) - -/********************************************************************* -* Chip Configuration Module (CCM) -*********************************************************************/ - -/* Bit definitions and macros for CCR_360 */ -#define CCM_CCR_360_PLLMULT2(x) (((x)&0x0003)) /* 2-Bit PLL clock mode */ -#define CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ -#define CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ -#define CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ -#define CCM_CCR_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ -#define CCM_CCR_360_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL Clock Mode */ -#define CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ -#define CCM_CCR_360_FBCONFIG_MASK (0x00E0) -#define CCM_CCR_360_PLLMULT2_MASK (0x0003) -#define CCM_CCR_360_PLLMULT3_MASK (0x0007) -#define CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) -#define CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) -#define CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) -#define CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) -#define CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) -#define CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) -#define CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) -#define CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) -#define CCM_CCR_360_PLLMULT2_12X (0x0000) -#define CCM_CCR_360_PLLMULT2_6X (0x0001) -#define CCM_CCR_360_PLLMULT2_16X (0x0002) -#define CCM_CCR_360_PLLMULT2_8X (0x0003) -#define CCM_CCR_360_PLLMULT3_20X (0x0000) -#define CCM_CCR_360_PLLMULT3_10X (0x0001) -#define CCM_CCR_360_PLLMULT3_24X (0x0002) -#define CCM_CCR_360_PLLMULT3_18X (0x0003) -#define CCM_CCR_360_PLLMULT3_12X (0x0004) -#define CCM_CCR_360_PLLMULT3_6X (0x0005) -#define CCM_CCR_360_PLLMULT3_16X (0x0006) -#define CCM_CCR_360_PLLMULT3_8X (0x0007) - -/* Bit definitions and macros for CCR_256 */ -#define CCM_CCR_256_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL clock mode */ -#define CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ -#define CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ -#define CCM_CCR_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ -#define CCM_CCR_256_FBCONFIG_MASK (0x00E0) -#define CCM_CCR_256_FBCONFIG_NM_32 (0x0000) -#define CCM_CCR_256_FBCONFIG_NM_8 (0x0020) -#define CCM_CCR_256_FBCONFIG_NM_16 (0x0040) -#define CCM_CCR_256_FBCONFIG_M_32 (0x0080) -#define CCM_CCR_256_FBCONFIG_M_8 (0x00A0) -#define CCM_CCR_256_FBCONFIG_M_16 (0x00C0) -#define CCM_CCR_256_PLLMULT3_MASK (0x0007) -#define CCM_CCR_256_PLLMULT3_20X (0x0000) -#define CCM_CCR_256_PLLMULT3_10X (0x0001) -#define CCM_CCR_256_PLLMULT3_24X (0x0002) -#define CCM_CCR_256_PLLMULT3_18X (0x0003) -#define CCM_CCR_256_PLLMULT3_12X (0x0004) -#define CCM_CCR_256_PLLMULT3_6X (0x0005) -#define CCM_CCR_256_PLLMULT3_16X (0x0006) -#define CCM_CCR_256_PLLMULT3_8X (0x0007) - -/* Bit definitions and macros for RCON_360 */ -#define CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ -#define CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ -#define CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ -#define CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ -#define CCM_RCON_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ - -/* Bit definitions and macros for RCON_256 */ -#define CCM_RCON_256_PLLMULT(x) (((x)&0x0007)) /* PLL clock mode */ -#define CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ -#define CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ -#define CCM_RCON_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ - -/* Bit definitions and macros for CIR */ -#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ -#define CCM_CIR_PIN_MASK (0xFFC0) -#define CCM_CIR_PRN_MASK (0x003F) -#define CCM_CIR_PIN_MCF54450 (0x4F<<6) -#define CCM_CIR_PIN_MCF54451 (0x4D<<6) -#define CCM_CIR_PIN_MCF54452 (0x4B<<6) -#define CCM_CIR_PIN_MCF54453 (0x49<<6) -#define CCM_CIR_PIN_MCF54454 (0x4A<<6) -#define CCM_CIR_PIN_MCF54455 (0x48<<6) - -/* Bit definitions and macros for MISCCR */ -#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ -#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ -#define CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ -#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ -#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ -#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ -#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ -#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) /* Bus monitor timing field */ -#define CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ -#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ -#define CCM_MISCCR_BMT_65536 (0) -#define CCM_MISCCR_BMT_32768 (1) -#define CCM_MISCCR_BMT_16384 (2) -#define CCM_MISCCR_BMT_8192 (3) -#define CCM_MISCCR_BMT_4096 (4) -#define CCM_MISCCR_BMT_2048 (5) -#define CCM_MISCCR_BMT_1024 (6) -#define CCM_MISCCR_BMT_512 (7) -#define CCM_MISCCR_SSIPUS_UP (1) -#define CCM_MISCCR_SSIPUS_DOWN (0) -#define CCM_MISCCR_TIMDMA_TIM (1) -#define CCM_MISCCR_TIMDMA_SSI (0) -#define CCM_MISCCR_SSISRC_CLKIN (0) -#define CCM_MISCCR_SSISRC_PLL (1) -#define CCM_MISCCR_USBOC_ACTHI (0) -#define CCM_MISCCR_USBOV_ACTLO (1) -#define CCM_MISCCR_USBSRC_CLKIN (0) -#define CCM_MISCCR_USBSRC_PLL (1) - -/* Bit definitions and macros for CDR */ -#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clock divider */ -#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clock divider */ - -/* Bit definitions and macros for UOCSR */ -#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ -#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ -#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ -#define CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ -#define CCM_UOCSR_SEND (0x0010) /* Session end */ -#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ -#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ -#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ -#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ -#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ -#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ -#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ -#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ - -/********************************************************************* -* General Purpose I/O Module (GPIO) -*********************************************************************/ - -/* Bit definitions and macros for PAR_FEC */ -#define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) -#define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) -#define GPIO_PAR_FEC_FEC1_UNMASK (0x8F) -#define GPIO_PAR_FEC_FEC1_MII (0x70) -#define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) -#define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) -#define GPIO_PAR_FEC_FEC1_ATA (0x10) -#define GPIO_PAR_FEC_FEC1_GPIO (0x00) -#define GPIO_PAR_FEC_FEC0_UNMASK (0xF8) -#define GPIO_PAR_FEC_FEC0_MII (0x07) -#define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) -#define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) -#define GPIO_PAR_FEC_FEC0_ULPI (0x01) -#define GPIO_PAR_FEC_FEC0_GPIO (0x00) - -/* Bit definitions and macros for PAR_DMA */ -#define GPIO_PAR_DMA_DREQ0 (0x01) -#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) -#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) -#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) -#define GPIO_PAR_DMA_DACK1_UNMASK (0x3F) -#define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) -#define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) -#define GPIO_PAR_DMA_DACK1_GPIO (0x00) -#define GPIO_PAR_DMA_DREQ1_UNMASK (0xCF) -#define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) -#define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) -#define GPIO_PAR_DMA_DREQ1_GPIO (0x00) -#define GPIO_PAR_DMA_DACK0_UNMASK (0xF3) -#define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) -#define GPIO_PAR_DMA_DACK0_PCS3 (0x08) -#define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) -#define GPIO_PAR_DMA_DACK0_GPIO (0x00) -#define GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) -#define GPIO_PAR_DMA_DREQ0_GPIO (0x00) - -/* Bit definitions and macros for PAR_FBCTL */ -#define GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) -#define GPIO_PAR_FBCTL_RW (0x20) -#define GPIO_PAR_FBCTL_TA (0x40) -#define GPIO_PAR_FBCTL_OE (0x80) -#define GPIO_PAR_FBCTL_OE_OE (0x80) -#define GPIO_PAR_FBCTL_OE_GPIO (0x00) -#define GPIO_PAR_FBCTL_TA_TA (0x40) -#define GPIO_PAR_FBCTL_TA_GPIO (0x00) -#define GPIO_PAR_FBCTL_RW_RW (0x20) -#define GPIO_PAR_FBCTL_RW_GPIO (0x00) -#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) -#define GPIO_PAR_FBCTL_TS_TS (0x18) -#define GPIO_PAR_FBCTL_TS_ALE (0x10) -#define GPIO_PAR_FBCTL_TS_TBST (0x08) -#define GPIO_PAR_FBCTL_TS_GPIO (0x80) - -/* Bit definitions and macros for PAR_DSPI */ -#define GPIO_PAR_DSPI_SCK (0x01) -#define GPIO_PAR_DSPI_SOUT (0x02) -#define GPIO_PAR_DSPI_SIN (0x04) -#define GPIO_PAR_DSPI_PCS0 (0x08) -#define GPIO_PAR_DSPI_PCS1 (0x10) -#define GPIO_PAR_DSPI_PCS2 (0x20) -#define GPIO_PAR_DSPI_PCS5 (0x40) -#define GPIO_PAR_DSPI_PCS5_PCS5 (0x40) -#define GPIO_PAR_DSPI_PCS5_GPIO (0x00) -#define GPIO_PAR_DSPI_PCS2_PCS2 (0x20) -#define GPIO_PAR_DSPI_PCS2_GPIO (0x00) -#define GPIO_PAR_DSPI_PCS1_PCS1 (0x10) -#define GPIO_PAR_DSPI_PCS1_GPIO (0x00) -#define GPIO_PAR_DSPI_PCS0_PCS0 (0x08) -#define GPIO_PAR_DSPI_PCS0_GPIO (0x00) -#define GPIO_PAR_DSPI_SIN_SIN (0x04) -#define GPIO_PAR_DSPI_SIN_GPIO (0x00) -#define GPIO_PAR_DSPI_SOUT_SOUT (0x02) -#define GPIO_PAR_DSPI_SOUT_GPIO (0x00) -#define GPIO_PAR_DSPI_SCK_SCK (0x01) -#define GPIO_PAR_DSPI_SCK_GPIO (0x00) - -/* Bit definitions and macros for PAR_BE */ -#define GPIO_PAR_BE_BS0 (0x01) -#define GPIO_PAR_BE_BS1 (0x04) -#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) -#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) -#define GPIO_PAR_BE_BE3_UNMASK (0x3F) -#define GPIO_PAR_BE_BE3_BE3 (0xC0) -#define GPIO_PAR_BE_BE3_TSIZ1 (0x80) -#define GPIO_PAR_BE_BE3_GPIO (0x00) -#define GPIO_PAR_BE_BE2_UNMASK (0xCF) -#define GPIO_PAR_BE_BE2_BE2 (0x30) -#define GPIO_PAR_BE_BE2_TSIZ0 (0x20) -#define GPIO_PAR_BE_BE2_GPIO (0x00) -#define GPIO_PAR_BE_BE1_BE1 (0x04) -#define GPIO_PAR_BE_BE1_GPIO (0x00) -#define GPIO_PAR_BE_BE0_BE0 (0x01) -#define GPIO_PAR_BE_BE0_GPIO (0x00) - -/* Bit definitions and macros for PAR_CS */ -#define GPIO_PAR_CS_CS1 (0x02) -#define GPIO_PAR_CS_CS2 (0x04) -#define GPIO_PAR_CS_CS3 (0x08) -#define GPIO_PAR_CS_CS3_CS3 (0x08) -#define GPIO_PAR_CS_CS3_GPIO (0x00) -#define GPIO_PAR_CS_CS2_CS2 (0x04) -#define GPIO_PAR_CS_CS2_GPIO (0x00) -#define GPIO_PAR_CS_CS1_CS1 (0x02) -#define GPIO_PAR_CS_CS1_GPIO (0x00) - -/* Bit definitions and macros for PAR_TIMER */ -#define GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) -#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) -#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) -#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) -#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) -#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) -#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) -#define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) -#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) -#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) -#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) -#define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) -#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) -#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) -#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) -#define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) -#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) -#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) -#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) -#define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) -#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) - -/* Bit definitions and macros for PAR_USB */ -#define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) -#define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) -#define GPIO_PAR_USB_VBUSEN_UNMASK (0xF3) -#define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) -#define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) -#define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) -#define GPIO_PAR_USB_VBUSEN_GPIO (0x00) -#define GPIO_PAR_USB_VBUSOC_UNMASK (0xFC) -#define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) -#define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) -#define GPIO_PAR_USB_VBUSOC_GPIO (0x00) - -/* Bit definitions and macros for PAR_UART */ -#define GPIO_PAR_UART_U0TXD (0x01) -#define GPIO_PAR_UART_U0RXD (0x02) -#define GPIO_PAR_UART_U0RTS (0x04) -#define GPIO_PAR_UART_U0CTS (0x08) -#define GPIO_PAR_UART_U1TXD (0x10) -#define GPIO_PAR_UART_U1RXD (0x20) -#define GPIO_PAR_UART_U1RTS (0x40) -#define GPIO_PAR_UART_U1CTS (0x80) -#define GPIO_PAR_UART_U1CTS_U1CTS (0x80) -#define GPIO_PAR_UART_U1CTS_GPIO (0x00) -#define GPIO_PAR_UART_U1RTS_U1RTS (0x40) -#define GPIO_PAR_UART_U1RTS_GPIO (0x00) -#define GPIO_PAR_UART_U1RXD_U1RXD (0x20) -#define GPIO_PAR_UART_U1RXD_GPIO (0x00) -#define GPIO_PAR_UART_U1TXD_U1TXD (0x10) -#define GPIO_PAR_UART_U1TXD_GPIO (0x00) -#define GPIO_PAR_UART_U0CTS_U0CTS (0x08) -#define GPIO_PAR_UART_U0CTS_GPIO (0x00) -#define GPIO_PAR_UART_U0RTS_U0RTS (0x04) -#define GPIO_PAR_UART_U0RTS_GPIO (0x00) -#define GPIO_PAR_UART_U0RXD_U0RXD (0x02) -#define GPIO_PAR_UART_U0RXD_GPIO (0x00) -#define GPIO_PAR_UART_U0TXD_U0TXD (0x01) -#define GPIO_PAR_UART_U0TXD_GPIO (0x00) - -/* Bit definitions and macros for PAR_FECI2C */ -#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) -#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) -#define GPIO_PAR_FECI2C_MDIO0 (0x0010) -#define GPIO_PAR_FECI2C_MDC0 (0x0040) -#define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) -#define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) -#define GPIO_PAR_FECI2C_MDC1_UNMASK (0xF3FF) -#define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) -#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) -#define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) -#define GPIO_PAR_FECI2C_MDIO1_UNMASK (0xFCFF) -#define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) -#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) -#define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) -#define GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) -#define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) -#define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) -#define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFFF3) -#define GPIO_PAR_FECI2C_SCL_SCL (0x000C) -#define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) -#define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFFFC) -#define GPIO_PAR_FECI2C_SDA_SDA (0x0003) -#define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) -#define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) - -/* Bit definitions and macros for PAR_SSI */ -#define GPIO_PAR_SSI_MCLK (0x0001) -#define GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) -#define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) -#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) -#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) -#define GPIO_PAR_SSI_BCLK_UNMASK (0xFCFF) -#define GPIO_PAR_SSI_BCLK_BCLK (0x0300) -#define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) -#define GPIO_PAR_SSI_BCLK_GPIO (0x0000) -#define GPIO_PAR_SSI_FS_UNMASK (0xFF3F) -#define GPIO_PAR_SSI_FS_FS (0x00C0) -#define GPIO_PAR_SSI_FS_U1RTS (0x0080) -#define GPIO_PAR_SSI_FS_GPIO (0x0000) -#define GPIO_PAR_SSI_SRXD_UNMASK (0xFFCF) -#define GPIO_PAR_SSI_SRXD_SRXD (0x0030) -#define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) -#define GPIO_PAR_SSI_SRXD_GPIO (0x0000) -#define GPIO_PAR_SSI_STXD_UNMASK (0xFFF3) -#define GPIO_PAR_SSI_STXD_STXD (0x000C) -#define GPIO_PAR_SSI_STXD_U1TXD (0x0008) -#define GPIO_PAR_SSI_STXD_GPIO (0x0000) -#define GPIO_PAR_SSI_MCLK_MCLK (0x0001) -#define GPIO_PAR_SSI_MCLK_GPIO (0x0000) - -/* Bit definitions and macros for PAR_ATA */ -#define GPIO_PAR_ATA_IORDY (0x0001) -#define GPIO_PAR_ATA_DMARQ (0x0002) -#define GPIO_PAR_ATA_RESET (0x0004) -#define GPIO_PAR_ATA_DA0 (0x0020) -#define GPIO_PAR_ATA_DA1 (0x0040) -#define GPIO_PAR_ATA_DA2 (0x0080) -#define GPIO_PAR_ATA_CS0 (0x0100) -#define GPIO_PAR_ATA_CS1 (0x0200) -#define GPIO_PAR_ATA_BUFEN (0x0400) -#define GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) -#define GPIO_PAR_ATA_BUFEN_GPIO (0x0000) -#define GPIO_PAR_ATA_CS1_CS1 (0x0200) -#define GPIO_PAR_ATA_CS1_GPIO (0x0000) -#define GPIO_PAR_ATA_CS0_CS0 (0x0100) -#define GPIO_PAR_ATA_CS0_GPIO (0x0000) -#define GPIO_PAR_ATA_DA2_DA2 (0x0080) -#define GPIO_PAR_ATA_DA2_GPIO (0x0000) -#define GPIO_PAR_ATA_DA1_DA1 (0x0040) -#define GPIO_PAR_ATA_DA1_GPIO (0x0000) -#define GPIO_PAR_ATA_DA0_DA0 (0x0020) -#define GPIO_PAR_ATA_DA0_GPIO (0x0000) -#define GPIO_PAR_ATA_RESET_RESET (0x0004) -#define GPIO_PAR_ATA_RESET_GPIO (0x0000) -#define GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) -#define GPIO_PAR_ATA_DMARQ_GPIO (0x0000) -#define GPIO_PAR_ATA_IORDY_IORDY (0x0001) -#define GPIO_PAR_ATA_IORDY_GPIO (0x0000) - -/* Bit definitions and macros for PAR_IRQ */ -#define GPIO_PAR_IRQ_IRQ1 (0x02) -#define GPIO_PAR_IRQ_IRQ4 (0x10) -#define GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) -#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) -#define GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) -#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) - -/* Bit definitions and macros for PAR_PCI */ -#define GPIO_PAR_PCI_REQ0 (0x0001) -#define GPIO_PAR_PCI_REQ1 (0x0004) -#define GPIO_PAR_PCI_REQ2 (0x0010) -#define GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) -#define GPIO_PAR_PCI_GNT0 (0x0100) -#define GPIO_PAR_PCI_GNT1 (0x0400) -#define GPIO_PAR_PCI_GNT2 (0x1000) -#define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) -#define GPIO_PAR_PCI_GNT3_UNMASK (0x3FFF) -#define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) -#define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) -#define GPIO_PAR_PCI_GNT3_GPIO (0x0000) -#define GPIO_PAR_PCI_GNT2_GNT2 (0x1000) -#define GPIO_PAR_PCI_GNT2_GPIO (0x0000) -#define GPIO_PAR_PCI_GNT1_GNT1 (0x0400) -#define GPIO_PAR_PCI_GNT1_GPIO (0x0000) -#define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) -#define GPIO_PAR_PCI_GNT0_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ3_UNMASK (0xFF3F) -#define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) -#define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) -#define GPIO_PAR_PCI_REQ3_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ2_REQ2 (0x0010) -#define GPIO_PAR_PCI_REQ2_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ1_REQ1 (0x0040) -#define GPIO_PAR_PCI_REQ1_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ0_REQ0 (0x0001) -#define GPIO_PAR_PCI_REQ0_GPIO (0x0000) - -/* Bit definitions and macros for MSCR_SDRAM */ -#define GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) -#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) -#define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) -#define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) -#define GPIO_MSCR_SDRAM_SDDATA_UNMASK (0x3F) -#define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) -#define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) -#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) -#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDDQS_UNMASK (0xCF) -#define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) -#define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) -#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) -#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) -#define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) -#define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) -#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) -#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) -#define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) -#define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) -#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) -#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) - -/* Bit definitions and macros for MSCR_PCI */ -#define GPIO_MSCR_PCI_PCI (0x01) -#define GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) -#define GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) - -/* Bit definitions and macros for DSCR_I2C */ -#define GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) -#define GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) -#define GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) -#define GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) -#define GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_FLEXBUS */ -#define GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) -#define GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) -#define GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) -#define GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) -#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) -#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF (0x80) -#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) -#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) -#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) -#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) -#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) -#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) -#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) -#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) -#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) -#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) -#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) -#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) -#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) -#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_FEC */ -#define GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) -#define GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) -#define GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) -#define GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) -#define GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) -#define GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) -#define GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) -#define GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) -#define GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) -#define GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_UART */ -#define GPIO_DSCR_UART_UART0(x) (((x)&0x03)) -#define GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) -#define GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) -#define GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) -#define GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) -#define GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) -#define GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) -#define GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) -#define GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) -#define GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_DSPI */ -#define GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) -#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) -#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) -#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) -#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_TIMER */ -#define GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) -#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) -#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) -#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) -#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_SSI */ -#define GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) -#define GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) -#define GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) -#define GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) -#define GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_DMA */ -#define GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) -#define GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) -#define GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) -#define GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) -#define GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_DEBUG */ -#define GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) -#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) -#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) -#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) -#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_RESET */ -#define GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) -#define GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) -#define GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) -#define GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) -#define GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_IRQ */ -#define GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) -#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) -#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) -#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) -#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_USB */ -#define GPIO_DSCR_USB_USB(x) (((x)&0x03)) -#define GPIO_DSCR_USB_USB_LOAD_50PF (0x03) -#define GPIO_DSCR_USB_USB_LOAD_30PF (0x02) -#define GPIO_DSCR_USB_USB_LOAD_20PF (0x01) -#define GPIO_DSCR_USB_USB_LOAD_10PF (0x00) - -/* Bit definitions and macros for DSCR_ATA */ -#define GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) -#define GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) -#define GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) -#define GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) -#define GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) - -/********************************************************************* -* SDRAM Controller (SDRAMC) -*********************************************************************/ - -/* Bit definitions and macros for SDMR */ -#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ -#define SDRAMC_SDMR_CMD (0x00010000) /* Command */ -#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ -#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ -#define SDRAMC_SDMR_BK_LMR (0x00000000) -#define SDRAMC_SDMR_BK_LEMR (0x40000000) - -/* Bit definitions and macros for SDCR */ -#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ -#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ -#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ -#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ -#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ -#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ -#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ -#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ -#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ -#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ -#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ -#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ -#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ -#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000) - -/* Bit definitions and macros for SDCFG1 */ -#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ -#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ -#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ -#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ -#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ -#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ -#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ - -/* Bit definitions and macros for SDCFG2 */ -#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ -#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ -#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ -#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ - -/* Bit definitions and macros for SDCS group */ -#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ -#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ -#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) -#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) -#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) - -/********************************************************************* -* Phase Locked Loop (PLL) -*********************************************************************/ - -/* Bit definitions and macros for PCR */ -#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */ -#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for internal bus clock frequency */ -#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for Flexbus clock frequency */ -#define PLL_PCR_OUTDIV4(x) (((x)&0x0000000F)<<12) /* Output divider for PCI clock frequency */ -#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */ -#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */ -#define PLL_PCR_PFDR_MASK (0x000F0000) -#define PLL_PCR_OUTDIV5_MASK (0x000F0000) -#define PLL_PCR_OUTDIV4_MASK (0x0000F000) -#define PLL_PCR_OUTDIV3_MASK (0x00000F00) -#define PLL_PCR_OUTDIV2_MASK (0x000000F0) -#define PLL_PCR_OUTDIV1_MASK (0x0000000F) - -/* Bit definitions and macros for PSR */ -#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */ -#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */ -#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */ -#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */ - -/********************************************************************* -* PCI -*********************************************************************/ - -/* Bit definitions and macros for SCR */ -#define PCI_SCR_PE (0x80000000) /* Parity Error detected */ -#define PCI_SCR_SE (0x40000000) /* System error signalled */ -#define PCI_SCR_MA (0x20000000) /* Master aboart received */ -#define PCI_SCR_TR (0x10000000) /* Target abort received */ -#define PCI_SCR_TS (0x08000000) /* Target abort signalled */ -#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */ -#define PCI_SCR_DP (0x01000000) /* Master data parity err */ -#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */ -#define PCI_SCR_R (0x00400000) /* Reserved */ -#define PCI_SCR_66M (0x00200000) /* 66Mhz */ -#define PCI_SCR_C (0x00100000) /* Capabilities list */ -#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */ -#define PCI_SCR_S (0x00000100) /* SERR enable */ -#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */ -#define PCI_SCR_PER (0x00000040) /* Parity error response */ -#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */ -#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */ -#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */ -#define PCI_SCR_B (0x00000004) /* Bus master enable */ -#define PCI_SCR_M (0x00000002) /* Memory access control */ -#define PCI_SCR_IO (0x00000001) /* I/O access control */ - -#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */ -#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */ -#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */ -#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */ - -#define PCI_BAR_BAR0(x) (x & 0xFFFC0000) -#define PCI_BAR_BAR1(x) (x & 0xFFF00000) -#define PCI_BAR_BAR2(x) (x & 0xFFC00000) -#define PCI_BAR_BAR3(x) (x & 0xFF000000) -#define PCI_BAR_BAR4(x) (x & 0xF8000000) -#define PCI_BAR_BAR5(x) (x & 0xE0000000) -#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */ -#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */ -#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */ - -#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */ -#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */ -#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */ -#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */ - -#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */ -#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */ -#define PCI_GSCR_SE (0x10000000) /* SERR detected */ -#define PCI_GSCR_ER (0x08000000) /* Error response detected */ -#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */ -#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */ -#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */ -#define PCI_GSCR_PR (0x00000001) /* PCI reset */ - -#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */ -#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */ -#define PCI_TCR1_P (0x00010000) /* Prefetch reads */ -#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */ - -#define PCI_TCR2_B5E (0x00002000) /* */ -#define PCI_TCR2_B4E (0x00001000) /* */ -#define PCI_TCR2_B3E (0x00000800) /* */ -#define PCI_TCR2_B2E (0x00000400) /* */ -#define PCI_TCR2_B1E (0x00000200) /* */ -#define PCI_TCR2_B0E (0x00000100) /* */ -#define PCI_TCR2_CR (0x00000001) /* */ - -#define PCI_TBATR_BAT(x) ((x & 0xFFF) << 20) -#define PCI_TBATR_EN (0x00000001) /* Enable */ - -#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */ -#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */ -#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */ -#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */ -#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */ -#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */ -#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */ -#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */ -#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */ -#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */ -#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */ -#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */ -#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */ -#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */ -#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */ - -#define PCI_ICR_REE (0x04000000) /* Retry error enable */ -#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */ -#define PCI_ICR_TAE (0x01000000) /* Target abort enable */ -#define PCI_ICR_MAXRETRY(x) ((x) & 0x000000FF) - -/********************************************************************/ - -#endif /* __MCF5445X__ */ diff --git a/board/freescale/m54451evb/Kconfig b/board/freescale/m54451evb/Kconfig deleted file mode 100644 index f460e51c9b..0000000000 --- a/board/freescale/m54451evb/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_M54451EVB - -config SYS_CPU - default "mcf5445x" - -config SYS_BOARD - default "m54451evb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "M54451EVB" - -endif diff --git a/board/freescale/m54451evb/MAINTAINERS b/board/freescale/m54451evb/MAINTAINERS deleted file mode 100644 index 52a2681080..0000000000 --- a/board/freescale/m54451evb/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -M54451EVB BOARD -#M: - -S: Maintained -F: board/freescale/m54451evb/ -F: include/configs/M54451EVB.h -F: configs/M54451EVB_defconfig -F: configs/M54451EVB_stmicro_defconfig diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile deleted file mode 100644 index 8c2c6a9eb7..0000000000 --- a/board/freescale/m54451evb/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y = m54451evb.o -extra-y += sbf_dram_init.o diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c deleted file mode 100644 index a4ddc69166..0000000000 --- a/board/freescale/m54451evb/m54451evb.c +++ /dev/null @@ -1,98 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - /* - * need to to: - * Check serial flash size. if 2mb evb, else 8mb demo - */ - puts("Board: "); - puts("Freescale M54451 EVB\n"); - return 0; -}; - -int dram_init(void) -{ - u32 dramsize; -#ifdef CONFIG_CF_SBF - /* - * Serial Boot: The dram is already initialized in start.S - * only require to return DRAM size - */ - dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; -#else - sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); - gpio_t *gpio = (gpio_t *)(MMAP_GPIO); - u32 i; - - dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; - - if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) && - (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2)) - return dramsize; - - for (i = 0x13; i < 0x20; i++) { - if (dramsize == (1 << i)) - break; - } - i--; - - out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); - - out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); - - out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); - out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); - - udelay(200); - - /* Issue PALL */ - out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); - __asm__("nop"); - - /* Perform two refresh cycles */ - out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); - __asm__("nop"); - out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); - __asm__("nop"); - - /* Issue LEMR */ - out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); - __asm__("nop"); - out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); - __asm__("nop"); - - out_be32(&sdram->sdcr, - (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000); - - udelay(100); -#endif - gd->ram_size = dramsize; - - return 0; -}; - -int testdram(void) -{ - /* TODO: XXX XXX XXX */ - printf("DRAM test not implemented!\n"); - - return (0); -} diff --git a/board/freescale/m54451evb/sbf_dram_init.S b/board/freescale/m54451evb/sbf_dram_init.S deleted file mode 100644 index ee08cd1ecb..0000000000 --- a/board/freescale/m54451evb/sbf_dram_init.S +++ /dev/null @@ -1,96 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Board-specific sbf ddr/sdram init. - * - * (C) Copyright 2017 Angelo Dureghello - */ - - #include - -.global sbf_dram_init -.text - -sbf_dram_init: - /* Dram Initialization a1, a2, and d0 */ - /* mscr sdram */ - move.l #0xFC0A4074, %a1 - move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) - nop - - /* SDRAM Chip 0 and 1 */ - move.l #0xFC0B8110, %a1 - move.l #0xFC0B8114, %a2 - - /* calculate the size */ - move.l #0x13, %d1 - move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 -#ifdef CONFIG_SYS_SDRAM_BASE1 - lsr.l #1, %d2 -#endif - -dramsz_loop: - lsr.l #1, %d2 - add.l #1, %d1 - cmp.l #1, %d2 - bne dramsz_loop -#ifdef CONFIG_SYS_NAND_BOOT - beq asm_nand_chk_status -#endif - /* SDRAM Chip 0 and 1 */ - move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) - or.l %d1, (%a1) -#ifdef CONFIG_SYS_SDRAM_BASE1 - move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) - or.l %d1, (%a2) -#endif - nop - - /* dram cfg1 and cfg2 */ - move.l #0xFC0B8008, %a1 - move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) - nop - move.l #0xFC0B800C, %a2 - move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) - nop - - move.l #0xFC0B8000, %a1 /* Mode */ - move.l #0xFC0B8004, %a2 /* Ctrl */ - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - move.l #1000, %d1 - bsr asm_delay - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - /* Perform two refresh cycles */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 - nop - move.l %d0, (%a2) - move.l %d0, (%a2) - nop - - /* Issue LEMR */ - move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) - nop - move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) - - move.l #500, %d1 - bsr asm_delay - - move.l #(CONFIG_SYS_SDRAM_CTRL), %d1 - and.l #0x7FFFFFFF, %d1 - - or.l #0x10000C00, %d1 - - move.l %d1, (%a2) - nop - - move.l #2000, %d1 - bsr asm_delay - - rts diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig deleted file mode 100644 index a3583e5c5b..0000000000 --- a/configs/M54451EVB_defconfig +++ /dev/null @@ -1,40 +0,0 @@ -CONFIG_M68K=y -CONFIG_SYS_TEXT_BASE=0x0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="M54451EVB" -CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000" -CONFIG_BOOTDELAY=1 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="-> " -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0x40000 -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_ETH=y -CONFIG_MCFFEC=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_CF_SPI=y diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig deleted file mode 100644 index 5f5e6a55f6..0000000000 --- a/configs/M54451EVB_stmicro_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_M68K=y -CONFIG_SYS_TEXT_BASE=0x47E00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x20000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="M54451EVB_stmicro" -CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000" -CONFIG_BOOTDELAY=1 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=1 -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_ETH=y -CONFIG_MCFFEC=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_CF_SPI=y diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 43bb761483..cef9eecac2 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -105,17 +105,11 @@ static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd) } if ((dup_spd & 0xFFFF) == _100BASET) { -#ifdef CONFIG_MCF5445x - fecp->rcr &= ~0x200; /* disabled 10T base */ -#endif #ifdef MII_DEBUG printf("100Mbps\n"); #endif bd->bi_ethspeed = 100; } else { -#ifdef CONFIG_MCF5445x - fecp->rcr |= 0x200; /* enabled 10T base */ -#endif #ifdef MII_DEBUG printf("10Mbps\n"); #endif diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h deleted file mode 100644 index f5bafb70e7..0000000000 --- a/include/configs/M54451EVB.h +++ /dev/null @@ -1,242 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Freescale MCF54451 EVB board. - * - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M54451EVB_H -#define _M54451EVB_H - -#include - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_M54451EVB /* M54451EVB board */ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) - -#define LDS_BOARD_TEXT board/freescale/m54451evb/sbf_dram_init.o (.text*) - -#undef CONFIG_WATCHDOG - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Network configuration */ -#ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_ETHPRIME "FEC0" -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 - -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -#define CONFIG_HOSTNAME "M54451EVB" -#ifdef CONFIG_SYS_STMICRO_BOOT -/* ST Micro serial flash */ -#define CONFIG_SYS_LOAD_ADDR2 0x40010007 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "sbfhdr=sbfhdr.bin\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${sbfhdr};" \ - "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ - "upd=run load; run prog\0" \ - "prog=sf probe 0:1 1000000 3;" \ - "sf erase 0 30000;" \ - "sf write ${loadaddr} 0 30000;" \ - "save\0" \ - "" -#else -#define CONFIG_SYS_UBOOT_END 0x3FFFF -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=40010000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END) \ - "; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ - "save\0" \ - "" -#endif - -/* Realtime clock */ -#define CONFIG_MCFRTC -#undef RTC_DEBUG -#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) - -/* Timer */ -#define CONFIG_MCFTMR - -/* I2c */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -/* DSPI and Serial Flash */ -#define CONFIG_CF_DSPI -#define CONFIG_SERIAL_FLASH -#define CONFIG_SYS_SBFHDR_SIZE 0x7 - -/* Input, PCI, Flexbus, and VCO */ -#define CONFIG_EXTRA_CLOCK - -#define CONFIG_PRAM 2048 /* 2048 KB */ - -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) - -#define CONFIG_SYS_MBAR 0xFC000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ -#define CONFIG_SYS_SDRAM_CFG1 0x33633F30 -#define CONFIG_SYS_SDRAM_CFG2 0x57670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE20D2C00 -#define CONFIG_SYS_SDRAM_EMOD 0x80810000 -#define CONFIG_SYS_SDRAM_MODE 0x008D0000 -#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x44 - -#ifdef CONFIG_CF_SBF -# define CONFIG_SERIAL_BOOT -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ - -/* Reserve 256 kB for malloc() */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* Configuration for environment - * Environment is not embedded in u-boot. First time runing may have env - * crc error warning if there is no correct environment on the flash. - */ - -/* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE - -#ifdef CONFIG_SYS_FLASH_CFI - -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CONFIG_SYS_FLASH_CHECKSUM -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } - -#endif - -/* - * This is setting for JFFS2 support in u-boot. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#ifdef CONFIG_CMD_JFFS2 -# define CONFIG_JFFS2_DEV "nor0" -# define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) -#endif - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) -#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) -#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ - CF_CACR_ICINVA | CF_CACR_EUSP) -#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ - CF_CACR_DEC | CF_CACR_DDCM_P | \ - CF_CACR_DCINVA) & ~CF_CACR_ICINVA) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ -/* - * CS0 - NOR Flash 16MB - * CS1 - Available - * CS2 - Available - * CS3 - Available - * CS4 - Available - * CS5 - Available - */ - - /* Flash */ -#define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS0_CTRL 0x00004D80 - -#define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE - -#endif /* _M54451EVB_H */