From: Peter Tyser Date: Thu, 28 Oct 2010 20:24:59 +0000 (-0500) Subject: fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a72dbae2ccd38d2b32f8b814f5a528c88be65bd3;p=u-boot.git fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware Previously fsl_pci_init_port() always assumed that a port was a PCIe port and would incorrectly print messages for a PCI port such as the following on bootup: PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCIE1 on bus 00 - 00 This change corrects the output of fsl_pci_init_port(): PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCI1 on bus 00 - 00 Signed-off-by: Peter Tyser --- diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 1f021036e5..45794dabed 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -441,6 +441,8 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, { volatile ccsr_fsl_pci_t *pci; struct pci_region *r; + pci_dev_t dev = PCI_BDF(busno,0,0); + u8 pcie_cap; pci = (ccsr_fsl_pci_t *) pci_info->regs; @@ -479,7 +481,9 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, hose->last_busno = hose->first_busno; } - printf(" PCIE%x on bus %02x - %02x\n", pci_info->pci_num, + pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); + printf(" PCI%s%x on bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? + "E" : "", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1);