From: Marcel Ziswiler Date: Thu, 21 Jul 2022 13:41:23 +0000 (+0200) Subject: imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a68bad0a379afcc1b1e9e997bddd2eef0f3ffc34;p=u-boot.git imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb). Please further note that the PMIC node name got changed from a pmic label to pmic@25 which required adjustment in resp. board SPL file board/toradex/verdin-imx8mm/spl.c. Signed-off-by: Marcel Ziswiler --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5663630eba..6017df6e47 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -947,7 +947,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-venice-gw7901.dtb \ imx8mm-venice-gw7902.dtb \ imx8mm-venice-gw7903.dtb \ - imx8mm-verdin.dtb \ + imx8mm-verdin-wifi-dev.dtb \ phycore-imx8mm.dtb \ imx8mn-bsh-smm-s2.dtb \ imx8mn-bsh-smm-s2pro.dtb \ diff --git a/arch/arm/dts/imx8mm-mx8menlo-u-boot.dtsi b/arch/arm/dts/imx8mm-mx8menlo-u-boot.dtsi index b87cef9bf9..66cc97842c 100644 --- a/arch/arm/dts/imx8mm-mx8menlo-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-mx8menlo-u-boot.dtsi @@ -2,7 +2,7 @@ /* * Copyright 2021-2022 Marek Vasut */ -#include "imx8mm-verdin-u-boot.dtsi" +#include "imx8mm-verdin-wifi-dev-u-boot.dtsi" / { chosen { diff --git a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi new file mode 100644 index 0000000000..c2a5c2f7b2 --- /dev/null +++ b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + sound_card: sound-card { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx8mm-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Headphone Jack", "MICBIAS", + "IN1L", "Headphone Jack"; + simple-audio-card,widgets = + "Microphone", "Headphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + dailink_master: simple-audio-card,codec { + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; + + /* Audio Codec */ + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + AVDD-supply = <®_3p3v>; + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + clock-names = "mclk"; + CPVDD-supply = <®_3p3v>; + DBVDD-supply = <®_3p3v>; + DCVDD-supply = <®_3p3v>; + MICVDD-supply = <®_3p3v>; + reg = <0x1a>; + #sound-dai-cells = <0>; + }; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin I2S_1 */ +&sai2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx8mm-verdin-dev.dtsi b/arch/arm/dts/imx8mm-verdin-dev.dtsi new file mode 100644 index 0000000000..73cc3fafa0 --- /dev/null +++ b/arch/arm/dts/imx8mm-verdin-dev.dtsi @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8mm-verdin-dahlia.dtsi" + +/ { + sound_card: sound-card { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx8mm-nau8822"; + simple-audio-card,routing = + "Headphones", "LHP", + "Headphones", "RHP", + "Speaker", "LSPK", + "Speaker", "RSPK", + "Line Out", "AUXOUT1", + "Line Out", "AUXOUT2", + "LAUX", "Line In", + "RAUX", "Line In", + "LMICP", "Mic In", + "RMICP", "Mic In"; + simple-audio-card,widgets = + "Headphones", "Headphones", + "Line Out", "Line Out", + "Speaker", "Speaker", + "Microphone", "Mic In", + "Line", "Line In"; + + dailink_master: simple-audio-card,codec { + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + sound-dai = <&nau8822_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&gpio_expander_21 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + /* Audio Codec */ + nau8822_1a: audio-codec@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; + }; +}; + +/* Verdin UART_1, connector X50 through RS485 transceiver */ +&uart2 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; +}; + +/* Limit frequency on dev board due to long traces and bad signal integrity */ +&usdhc2 { + max-frequency = <100000000>; +}; diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi similarity index 53% rename from arch/arm/dts/imx8mm-verdin-u-boot.dtsi rename to arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi index 976399ad60..809c39c2b9 100644 --- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2020-2021 Toradex + * Copyright 2020-2022 Toradex */ #include "imx8mm-u-boot.dtsi" @@ -20,14 +20,24 @@ }; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic} { +&{/aliases} { + eeprom0 = &eeprom_module; + eeprom1 = &eeprom_carrier_board; + eeprom2 = &eeprom_display_adapter; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25} { u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic/regulators} { +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { u-boot,dm-spl; }; +&binman_uboot { + offset = <0x5fc00>; +}; + &gpio1 { u-boot,dm-spl; }; @@ -50,6 +60,32 @@ &i2c1 { u-boot,dm-spl; + + eeprom_module: eeprom@50 { + compatible = "i2c-eeprom"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + /* EEPROM on display adapter (MIPI DSI Display Adapter) */ + eeprom_display_adapter: eeprom@50 { + compatible = "i2c-eeprom"; + pagesize = <16>; + reg = <0x50>; + }; + + /* EEPROM on carrier board */ + eeprom_carrier_board: eeprom@57 { + compatible = "i2c-eeprom"; + pagesize = <16>; + reg = <0x57>; + }; }; &pinctrl_i2c1 { @@ -95,7 +131,3 @@ &wdog1 { u-boot,dm-spl; }; - -&binman_uboot { - offset = <0x5fc00>; -}; diff --git a/arch/arm/dts/imx8mm-verdin-wifi-dev.dts b/arch/arm/dts/imx8mm-verdin-wifi-dev.dts new file mode 100644 index 0000000000..ef95202183 --- /dev/null +++ b/arch/arm/dts/imx8mm-verdin-wifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board"; + compatible = "toradex,verdin-imx8mm-wifi-dev", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm/dts/imx8mm-verdin-wifi.dtsi b/arch/arm/dts/imx8mm-verdin-wifi.dtsi new file mode 100644 index 0000000000..017db9eab2 --- /dev/null +++ b/arch/arm/dts/imx8mm-verdin-wifi.dtsi @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PDn_AW-CM276NF"; + startup-delay-us = <2000>; + }; +}; + +&gpio3 { + gpio-line-names = "SODIMM_52", + "SODIMM_54", + "SODIMM_64", + "SODIMM_21", + "SODIMM_206", + "SODIMM_76", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", + "SODIMM_66", + "SODIMM_17", + "", + "", + "", + "SODIMM_244", + "", + "SODIMM_48", + "SODIMM_44", + "SODIMM_42", + "SODIMM_46"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_102", + "SODIMM_90", + "SODIMM_92", + "SODIMM_94", + "SODIMM_96", + "SODIMM_100", + "", + "", + "", + "", + "SODIMM_120", + "SODIMM_104", + "SODIMM_106", + "SODIMM_108", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "", + "SODIMM_118", + "", + "SODIMM_88", + "SODIMM_149", + "SODIMM_147", + "SODIMM_36", + "SODIMM_32", + "SODIMM_30", + "SODIMM_34", + "SODIMM_38", + "SODIMM_252", + "SODIMM_133", + "SODIMM_135", + "SODIMM_129"; +}; + +/* On-module Wi-Fi */ +&usdhc3 { + bus-width = <4>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; diff --git a/arch/arm/dts/imx8mm-verdin.dts b/arch/arm/dts/imx8mm-verdin.dts deleted file mode 100644 index a2331627d7..0000000000 --- a/arch/arm/dts/imx8mm-verdin.dts +++ /dev/null @@ -1,1031 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include -#include "imx8mm.dtsi" - -/ { - model = "Toradex Verdin iMX8M Mini Quad/DualLite"; - compatible = "toradex,verdin-imx8mm", "fsl,imx8mm"; - - chosen { - stdout-path = &uart1; - }; - - aliases { - eeprom0 = &eeprom_module; - eeprom1 = &eeprom_carrier_board; - eeprom2 = &eeprom_display_adapter; - }; - - /* fixed clock dedicated to SPI CAN controller */ - clk20m: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <20000000>; - }; - - reg_ethphy: regulator-ethphy { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; - off-on-delay = <500000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_eth>; - regulator-boot-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "V3.3_ETH"; - startup-delay-us = <200000>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - compatible = "regulator-fixed"; - enable-active-high; - /* Verdin USB1_EN */ - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_en>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usb_otg2_vbus: regulator-usb-otg2 { - compatible = "regulator-fixed"; - enable-active-high; - /* Verdin USB2_EN */ - gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb2_en>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; - regulator-name = "V3.3_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <2000>; - }; - - reg_wifi_en: regulator-wifi-en { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wifi_pwr_en>; - regulator-name = "V3.3_WI-FI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <2000>; - }; -}; - -&A53_0 { - arm-supply = <&buck2_reg>; -}; - -&clk { - assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; -}; - -/* Verdin SPI_1 */ -&ecspi2 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - status = "okay"; - - spidev20: spidev@0 { - compatible = "toradex,evalspi"; - reg = <0>; - spi-max-frequency = <10000000>; - status = "okay"; - }; -}; - -/* On-module CAN controller 1 & 2 */ -&ecspi3 { - #address-cells = <1>; - #size-cells = <0>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, - <&gpio1 5 GPIO_ACTIVE_LOW>; - /* This property is required, even if marked as obsolete in the doku */ - fsl,spi-num-chipselects = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - status = "okay"; - - can1: can@0 { - compatible = "microchip,mcp2517fd"; - clocks = <&clk20m>; - gpio-controller; - interrupt-parent = <&gpio1>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - microchip,clock-allways-on; - microchip,clock-out-div = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1_int>; - reg = <0>; - spi-max-frequency = <2000000>; - }; - - can2: can@1 { - compatible = "microchip,mcp2517fd"; - clocks = <&clk20m>; - gpio-controller; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2_int>; - reg = <1>; - spi-max-frequency = <2000000>; - }; -}; - -&fec1 { - fsl,magic-packet; - phy-handle = <ðphy0>; - phy-mode = "rgmii-id"; - phy-supply = <®_ethphy>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_fec1>; - pinctrl-1 = <&pinctrl_fec1_sleep>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@7 { - compatible = "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <&gpio1>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <0>; - reg = <7>; - }; - }; -}; - -&gpio4 { - /* - * The SE050 security element may be driven via I2C from user space. - * The element itself is enabled here as it has no kernel driver. - */ - se050_ena { - gpio-hog; - gpios = <19 GPIO_ACTIVE_HIGH>; - line-name = "SE050_ENABLE"; - output-high; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_se050_ena>; - }; -}; - -&gpio5 { - ctrl_sleep_moci { - gpio-hog; - /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ - gpios = <1 GPIO_ACTIVE_HIGH>; - line-name = "CTRL_SLEEP_MOCI#"; - output-high; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; - }; -}; - -/* On-module I2C */ -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - /* Assembled on V1.1 HW and later */ - pmic { - reg = <0x25>; - u-boot,dm-spl; - compatible = "nxp,pca9450a"; - /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ - pinctrl-0 = <&pinctrl_pmic>; - gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>; - - regulators { - u-boot,dm-spl; - #address-cells = <1>; - #size-cells = <0>; - - pca9450,pmic-buck2-uses-i2c-dvs; - /* Run/Standby voltage */ - pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>; - - buck1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "buck1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - buck2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "buck2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - buck3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "buck3"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-boot-on; - regulator-always-on; - }; - - buck4_reg: regulator@3 { - reg = <3>; - regulator-compatible = "buck4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5_reg: regulator@4 { - reg = <4>; - regulator-compatible = "buck5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck6_reg: regulator@5 { - reg = <5>; - regulator-compatible = "buck6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo5"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - }; - }; - - /* Epson RX8130 real time clock on carrier board */ - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - }; - - eeprom_module: eeprom@50 { - compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; - pagesize = <16>; - reg = <0x50>; - }; -}; - -/* Verdin I2C_2_DSI */ -&i2c2 { - clock-frequency = <10000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -/* Verdin I2C_3_HDMI N/A */ - -/* Verdin I2C_4_CSI */ -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; -}; - -/* Verdin I2C_1 */ -&i2c4 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - /* Audio Codec */ - wm8904_1a: codec@1a { - compatible = "wlf,wm8904"; - #sound-dai-cells = <0>; - clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; - clock-names = "mclk"; - reg = <0x1a>; - }; - - gpio_expander_21: gpio-expander@21 { - compatible = "nxp,pcal6416"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x21>; - }; - - /* Current measurement into module VCC */ - hwmon@40 { - compatible = "ti,ina219"; - reg = <0x40>; - shunt-resistor = <10000>; - status = "okay"; - }; - - /* EEPROM on display adapter (MIPI DSI Display Adapter) */ - eeprom_display_adapter: eeprom@50 { - compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; - pagesize = <16>; - reg = <0x50>; - }; - - /* EEPROM on carrier board */ - eeprom_carrier_board: eeprom@57 { - compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; - pagesize = <16>; - reg = <0x57>; - }; -}; - -/* Verdin PWM_3_DSI */ -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm_1>; - #pwm-cells = <3>; - status = "okay"; -}; - -/* Verdin PWM_1 */ -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm_2>; - #pwm-cells = <3>; - status = "okay"; -}; - -/* Verdin PWM_2 */ -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm_3>; - #pwm-cells = <3>; - status = "okay"; -}; - -/* Verdin UART_3, Console/Debug UART */ -&uart1 { - fsl,uart-has-rtscts; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -/* Verdin UART_1 */ -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -/* Verdin UART_2 */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -/* Verdin UART_4 */ -/* - * resource allocated to M4 by default, must not be accessed from A-35 or you - * get an OOPS - */ -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; -}; - -/* Verdin USB_1 */ -&usbotg1 { - dr_mode = "otg"; - picophy,dc-vol-level-adjust = <7>; - picophy,pre-emp-curr-control = <3>; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -/* Verdin USB_2 */ -&usbotg2 { - dr_mode = "host"; - picophy,dc-vol-level-adjust = <7>; - picophy,pre-emp-curr-control = <3>; - vbus-supply = <®_usb_otg2_vbus>; - status = "okay"; -}; - -/* On-module eMMC */ -&usdhc1 { - bus-width = <8>; - keep-power-in-suspend; - non-removable; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - pm-ignore-notify; - status = "okay"; - /* TODO Strobe */ -}; - -/* Verdin SD_1 */ -&usdhc2 { - bus-width = <4>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -/* On-module Wi-Fi */ -&usdhc3 { - bus-width = <4>; - non-removable; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; - vmmc-supply = <®_wifi_en>; - status = "okay"; -}; - -&wdog1 { - fsl,ext-reset-output; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dsi_bkl_en>, <&pinctrl_gpio1>, <&pinctrl_gpio2>, - <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio5>, - <&pinctrl_gpio6>, <&pinctrl_gpio7>, <&pinctrl_gpio8>, - <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, - <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hpd>; - - pinctrl_can1_int: can1intgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x1c4 - >; - }; - - pinctrl_can2_int: can2intgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x1c4 - >; - }; - - pinctrl_ctrl_force_off_moci: ctrlforceoffgrp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1c4 /* SODIMM 250 */ - >; - }; - - pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1c4 /* SODIMM 256 */ - >; - }; - - pinctrl_dsi_bkl_en: dsi_bkl_en { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x1c4 /* SODIMM 21 */ - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x1c4 /* SODIMM 198 */ - MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x4 /* SODIMM 200 */ - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x4 /* SODIMM 196 */ - MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x1c4 /* SODIMM 202 */ - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x1c4 - MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x4 - MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x4 - MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x1c4 - MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x1c4 - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c4 - >; - }; - - pinctrl_fec1_sleep: fec1-sleepgrp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f - MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f - MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f - MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f - MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184 - >; - }; - - pinctrl_flexspi0: flexspi0grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 /* SODIMM 52 */ - MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 /* SODIMM 54 */ - MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x82 /* SODIMM 64 */ - MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 /* SODIMM 56 */ - MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 /* SODIMM 58 */ - MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 /* SODIMM 60 */ - MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 /* SODIMM 62 */ - MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82 /* SODIMM 66 */ - >; - }; - - /* (MEZ_)GPIO_1 shared with (MEZ_)DSI_1_INT# on Verdin Development Board */ - pinctrl_gpio1: gpio1grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x184 /* SODIMM 206 */ - >; - }; - - pinctrl_gpio2: gpio2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x184 /* SODIMM 208 */ - >; - }; - - pinctrl_gpio3: gpio3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x184 /* SODIMM 210 */ - >; - }; - - pinctrl_gpio4: gpio4grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x184 /* SODIMM 212 */ - >; - }; - - pinctrl_gpio5: gpio5grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x184 /* SODIMM 216 */ - >; - }; - - pinctrl_gpio6: gpio6grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184 /* SODIMM 218 */ - >; - }; - - pinctrl_gpio7: gpio7grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x184 /* SODIMM 220 */ - >; - }; - - pinctrl_gpio8: gpio8grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 /* SODIMM 222 */ - >; - }; - - pinctrl_gpio_hog1: gpiohog1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4 /* SODIMM 88 */ - MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4 /* SODIMM 90 */ - MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4 /* SODIMM 92 */ - MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4 /* SODIMM 94 */ - MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 /* SODIMM 96 */ - MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 /* SODIMM 100 */ - MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 /* SODIMM 102 */ - MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 /* SODIMM 104 */ - MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 /* SODIMM 106 */ - MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 /* SODIMM 108 */ - MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 /* SODIMM 112 */ - MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 /* SODIMM 114 */ - MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 /* SODIMM 116 */ - MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4 /* SODIMM 118 */ - MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4 /* SODIMM 120 */ - >; - }; - - pinctrl_gpio_hog2: gpiohog2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1c4 /* SODIMM 91 */ - >; - }; - - pinctrl_gpio_hog3: gpiohog3grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x1c4 /* SODIMM 157 */ - MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 /* SODIMM 187 */ - >; - }; - - /* (MEZ_)DSI_1_INT# shared with (MEZ_)GPIO_1 on Verdin Development Board */ - pinctrl_gpio_hpd: gpiohpdgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x184 /* SODIMM 17 */ - >; - }; - - /* On-module I2C */ - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c6 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c6 - >; - }; - - /* Verdin I2C_4_CSI */ - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c6 /* SODIMM 55 */ - MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c6 /* SODIMM 53 */ - >; - }; - - /* Verdin I2C_2_DSI */ - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c6 /* SODIMM 95 */ - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c6 /* SODIMM 93 */ - >; - }; - - /* Verdin I2C_1 */ - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c6 /* SODIMM 14 */ - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c6 /* SODIMM 12 */ - >; - }; - - pinctrl_pcie0: pcie0grp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x6 /* SODIMM 244 */ - MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x6 /* PMIC_EN_PCIe_CLK */ - >; - }; - - pinctrl_pmic: pmicirqgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - - pinctrl_pwm_1: pwm1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* SODIMM 19 */ - >; - }; - - pinctrl_pwm_2: pwm2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x6 /* SODIMM 15 */ - >; - }; - - pinctrl_pwm_3: pwm3grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x6 /* SODIMM 16 */ - >; - }; - - pinctrl_reg_eth: regethgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x184 - >; - }; - - pinctrl_reg_usb1_en: regusb1engrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x184 /* SODIMM 155 */ - >; - }; - - pinctrl_reg_usb2_en: regusb2engrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x184 /* SODIMM 185 */ - >; - }; - - pinctrl_sai2: sai2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 /* SODIMM 38 */ - MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 /* SODIMM 36 */ - MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 /* SODIMM 30 */ - MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 /* SODIMM 34 */ - MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 /* SODIMM 32 */ - >; - }; - - pinctrl_sai5: sai5grp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 /* SODIMM 48 */ - MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 /* SODIMM 44 */ - MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 /* SODIMM 42 */ - MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 /* SODIMM 46 */ - >; - }; - - pinctrl_se050_ena: se050enagrp { - fsl,pins = < - MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x184 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4 /* SODIMM 147 */ - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4 /* SODIMM 149 */ - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1c4 /* SODIMM 133 */ - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1c4 /* SODIMM 135 */ - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1c4 /* SODIMM 131 */ - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1c4 /* SODIMM 129 */ - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1c4 /* SODIMM 141 */ - MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1c4 /* SODIMM 139 */ - MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1c4 /* SODIMM 137 */ - MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x1c4 /* SODIMM 143 */ - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x1c4 /* SODIMM 151 */ - MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x1c4 /* SODIMM 153 */ - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 - >; - }; - - pinctrl_usdhc2_cd: usdhc2cdgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 /* SODIMM 84 */ - >; - }; - - pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x184 /* SODIMM 76 */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 /* SODIMM 78 */ - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 /* SODIMM 74 */ - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 /* SODIMM 80 */ - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 /* SODIMM 82 */ - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SODIMM 70 */ - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SODIMM 72 */ - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; - - pinctrl_wifi_ctrl: wifictrlgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x1c4 /* WIFI_WKUP_BT */ - MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x1c4 /* WIFI_W_WKUP_HOST */ - MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x1c4 /* WIFI_WKUP_WLAN */ - >; - }; - - pinctrl_wifi_i2s: wifii2sgrp { - fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0xd6 - MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0xd6 - MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0xd6 - MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0xd6 - >; - }; - - pinctrl_wifi_pwr_en: wifipwrengrp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184 /* PMIC_EN_WIFI */ - >; - }; -}; diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi new file mode 100644 index 0000000000..eafa88d980 --- /dev/null +++ b/arch/arm/dts/imx8mm-verdin.dtsi @@ -0,0 +1,1295 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "dt-bindings/phy/phy-imx8-pcie.h" +#include "dt-bindings/pwm/pwm.h" +#include "imx8mm.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; + power-supply = <®_3p3v>; + /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ + pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + /* Fixed clock dedicated to SPI CAN controller */ + clk20m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + /* Carrier Board Supplies */ + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "+V5_SW"; + }; + + /* Non PMIC On-module Supplies */ + reg_ethphy: regulator-ethphy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ + off-on-delay = <500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3_ETH"; + startup-delay-us = <200000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_1_EN (SODIMM 155) */ + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_1_EN"; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_2_EN (SODIMM 185) */ + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_2_EN"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + off-on-delay = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use the kernel configuration settings instead */ + /delete-node/ linux,cma; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; +}; + +/* Verdin CAN_1 (On-module) */ +&ecspi3 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + can1: can@0 { + compatible = "microchip,mcp251xfd"; + clocks = <&clk20m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_int>; + reg = <0>; + spi-max-frequency = <8500000>; + }; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&fec1 { + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + phy-supply = <®_ethphy>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* Verdin QSPI_1 */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; +}; + +&gpio1 { + gpio-line-names = "SODIMM_216", + "SODIMM_19", + "", + "", + "", + "", + "", + "", + "SODIMM_220", + "SODIMM_222", + "", + "SODIMM_218", + "SODIMM_155", + "SODIMM_157", + "SODIMM_185", + "SODIMM_187"; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_84", + "SODIMM_78", + "SODIMM_74", + "SODIMM_80", + "SODIMM_82", + "SODIMM_70", + "SODIMM_72"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_131", + "", + "SODIMM_91", + "SODIMM_16", + "SODIMM_15", + "SODIMM_208", + "SODIMM_137", + "SODIMM_139", + "SODIMM_141", + "SODIMM_143", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "", + "", + "", + "", + "SODIMM_210", + "SODIMM_212", + "SODIMM_151", + "SODIMM_153"; + + ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <1 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; + }; +}; + +/* On-module I2C */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + interrupt-parent = <&gpio1>; + /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC + * behind this PMIC. + */ + + regulators { + reg_vdd_soc: BUCK1 { + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <800000>; + regulator-name = "On-module +VDD_SOC (BUCK1)"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <850000>; + regulator-name = "On-module +VDD_ARM (BUCK2)"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_dram: BUCK3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <850000>; + regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3 (BUCK4)"; + }; + + reg_vdd_1v8: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "PWR_1V8_MOCI (BUCK5)"; + }; + + reg_nvcc_dram: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "On-module +VDD_DDR (BUCK6)"; + }; + + reg_nvcc_snvs: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8_SNVS (LDO1)"; + }; + + reg_vdd_snvs: LDO2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-name = "On-module +V0.8_SNVS (LDO2)"; + }; + + reg_vdda: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8A (LDO3)"; + }; + + reg_vdd_phy: LDO4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <900000>; + regulator-name = "On-module +V0.9_MIPI (LDO4)"; + }; + + reg_nvcc_sd: LDO5 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin I2C_1 (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + clock-frequency = <10000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; +}; + +/* Verdin I2C_3_HDMI N/A */ + +/* Verdin I2C_4_CSI */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Verdin I2C_1 */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + gpio_expander_21: gpio-expander@21 { + compatible = "nxp,pcal6416"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x21>; + vcc-supply = <®_3p3v>; + status = "disabled"; + }; + + lvds_ti_sn65dsi83: bridge@2c { + compatible = "ti,sn65dsi83"; + /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; + reg = <0x2c>; + status = "disabled"; + }; + + /* Current measurement into module VCC */ + hwmon: hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + status = "disabled"; + }; + + hdmi_lontium_lt8912: hdmi@48 { + compatible = "lontium,lt8912b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + reg = <0x48>; + /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + /* + * Verdin GPIO_9_DSI + * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused) + */ + interrupt-parent = <&gpio3>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; + reg = <0x4a>; + /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ + reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + /* Temperature sensor on carrier board */ + hwmon_temp: sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + status = "disabled"; + }; + + /* EEPROM on display adapter (MIPI DSI Display Adapter) */ + eeprom_display_adapter: eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + status = "disabled"; + }; + + /* EEPROM on carrier board */ + eeprom_carrier_board: eeprom@57 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x57>; + status = "disabled"; + }; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <250000000>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + /* PCIE_1_RESET# (SODIMM 244) */ + reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = ; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_1>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_1 */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_2>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_2 */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3>; + #pwm-cells = <3>; +}; + +/* Verdin I2S_1 */ +&sai2 { + #sound-dai-cells = <0>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux console */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +/* Verdin UART_1 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* Verdin UART_2 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; +}; + +/* + * Verdin UART_4 + * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS + */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +/* Verdin USB_1 */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + over-current-active-low; + samsung,picophy-dc-vol-level-adjust = <7>; + samsung,picophy-pre-emp-curr-control = <3>; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; +}; + +/* Verdin USB_2 */ +&usbotg2 { + dr_mode = "host"; + over-current-active-low; + samsung,picophy-dc-vol-level-adjust = <7>; + samsung,picophy-pre-emp-curr-control = <3>; + vbus-supply = <®_usb_otg2_vbus>; +}; + +&usbphynop1 { + vcc-supply = <®_vdd_3v3>; +}; + +&usbphynop2 { + vcc-supply = <®_vdd_3v3>; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, + <&pinctrl_pmic_tpm_ena>; + + pinctrl_can1_int: can1intgrp { + fsl,pins = + ; /* CAN_1_SPI_INT#_1.8V */ + }; + + pinctrl_can2_int: can2intgrp { + fsl,pins = + ; /* CAN_2_SPI_INT#_1.8V, unused */ + }; + + pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { + fsl,pins = + ; /* SODIMM 256 */ + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = + , /* SODIMM 198 */ + , /* SODIMM 200 */ + , /* SODIMM 196 */ + ; /* SODIMM 202 */ + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = + , /* CAN_2_SPI_CS#_1.8V */ + , /* CAN_SPI_SCK_1.8V */ + , /* CAN_SPI_MOSI_1.8V */ + , /* CAN_SPI_MISO_1.8V */ + ; /* CAN_1_SPI_CS_1.8V# */ + }; + + pinctrl_fec1: fec1grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_fec1_sleep: fec1-sleepgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + , /* SODIMM 52 */ + , /* SODIMM 54 */ + , /* SODIMM 64 */ + , /* SODIMM 56 */ + , /* SODIMM 58 */ + , /* SODIMM 60 */ + , /* SODIMM 62 */ + ; /* SODIMM 66 */ + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = + ; /* SODIMM 206 */ + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = + ; /* SODIMM 208 */ + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = + ; /* SODIMM 210 */ + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = + ; /* SODIMM 212 */ + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = + ; /* SODIMM 216 */ + }; + + pinctrl_gpio6: gpio6grp { + fsl,pins = + ; /* SODIMM 218 */ + }; + + pinctrl_gpio7: gpio7grp { + fsl,pins = + ; /* SODIMM 220 */ + }; + + pinctrl_gpio8: gpio8grp { + fsl,pins = + ; /* SODIMM 222 */ + }; + + /* Verdin GPIO_9_DSI (pulled-up as active-low) */ + pinctrl_gpio_9_dsi: gpio9dsigrp { + fsl,pins = + ; /* SODIMM 17 */ + }; + + /* Verdin GPIO_10_DSI (pulled-up as active-low) */ + pinctrl_gpio_10_dsi: gpio10dsigrp { + fsl,pins = + ; /* SODIMM 21 */ + }; + + pinctrl_gpio_hog1: gpiohog1grp { + fsl,pins = + , /* SODIMM 88 */ + , /* SODIMM 90 */ + , /* SODIMM 92 */ + , /* SODIMM 94 */ + , /* SODIMM 96 */ + , /* SODIMM 100 */ + , /* SODIMM 102 */ + , /* SODIMM 104 */ + , /* SODIMM 106 */ + , /* SODIMM 108 */ + , /* SODIMM 112 */ + , /* SODIMM 114 */ + , /* SODIMM 116 */ + , /* SODIMM 118 */ + ; /* SODIMM 120 */ + }; + + pinctrl_gpio_hog2: gpiohog2grp { + fsl,pins = + ; /* SODIMM 91 */ + }; + + pinctrl_gpio_hog3: gpiohog3grp { + fsl,pins = + , /* SODIMM 157 */ + ; /* SODIMM 187 */ + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = + ; /* SODIMM 252 */ + }; + + /* On-module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = + , /* PMIC_I2C_SCL */ + ; /* PMIC_I2C_SDA */ + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c2: i2c2grp { + fsl,pins = + , /* SODIMM 55 */ + ; /* SODIMM 53 */ + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = + , /* SODIMM 55 */ + ; /* SODIMM 53 */ + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c3: i2c3grp { + fsl,pins = + , /* SODIMM 95 */ + ; /* SODIMM 93 */ + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = + , /* SODIMM 95 */ + ; /* SODIMM 93 */ + }; + + /* Verdin I2C_1 */ + pinctrl_i2c4: i2c4grp { + fsl,pins = + , /* SODIMM 14 */ + ; /* SODIMM 12 */ + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = + , /* SODIMM 14 */ + ; /* SODIMM 12 */ + }; + + /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ + pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { + fsl,pins = + ; /* SODIMM 42 */ + }; + + /* Verdin I2S_2_D_OUT shared with SAI5 */ + pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { + fsl,pins = + ; /* SODIMM 46 */ + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = + , /* SODIMM 244 */ + /* PMIC_EN_PCIe_CLK, unused */ + ; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = + ; /* PMIC_INT# */ + }; + + /* Verdin PWM_3_DSI shared with GPIO1_IO1 */ + pinctrl_pwm_1: pwm1grp { + fsl,pins = + ; /* SODIMM 19 */ + }; + + pinctrl_pwm_2: pwm2grp { + fsl,pins = + ; /* SODIMM 15 */ + }; + + pinctrl_pwm_3: pwm3grp { + fsl,pins = + ; /* SODIMM 16 */ + }; + + /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */ + pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp { + fsl,pins = + ; /* SODIMM 19 */ + }; + + pinctrl_reg_eth: regethgrp { + fsl,pins = + ; /* PMIC_EN_ETH */ + }; + + pinctrl_reg_usb1_en: regusb1engrp { + fsl,pins = + ; /* SODIMM 155 */ + }; + + pinctrl_reg_usb2_en: regusb2engrp { + fsl,pins = + ; /* SODIMM 185 */ + }; + + pinctrl_sai2: sai2grp { + fsl,pins = + , /* SODIMM 38 */ + , /* SODIMM 30 */ + , /* SODIMM 32 */ + , /* SODIMM 36 */ + ; /* SODIMM 34 */ + }; + + pinctrl_sai5: sai5grp { + fsl,pins = + , /* SODIMM 48 */ + , /* SODIMM 44 */ + , /* SODIMM 42 */ + ; /* SODIMM 46 */ + }; + + /* control signal for optional ATTPM20P or SE050 */ + pinctrl_pmic_tpm_ena: pmictpmenagrp { + fsl,pins = + ; /* PMIC_TPM_ENA */ + }; + + pinctrl_tsp: tspgrp { + fsl,pins = + , /* SODIMM 148 */ + , /* SODIMM 152 */ + , /* SODIMM 154 */ + , /* SODIMM 174 */ + ; /* SODIMM 150 */ + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + , /* SODIMM 147 */ + ; /* SODIMM 149 */ + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + , /* SODIMM 133 */ + , /* SODIMM 135 */ + , /* SODIMM 131 */ + ; /* SODIMM 129 */ + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + , /* SODIMM 141 */ + , /* SODIMM 139 */ + , /* SODIMM 137 */ + ; /* SODIMM 143 */ + }; + + pinctrl_uart4: uart4grp { + fsl,pins = + , /* SODIMM 151 */ + ; /* SODIMM 153 */ + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = + ; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp { + fsl,pins = + ; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { + fsl,pins = + ; /* SODIMM 76 */ + }; + + /* + * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the + * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. + */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + , + , /* SODIMM 78 */ + , /* SODIMM 74 */ + , /* SODIMM 80 */ + , /* SODIMM 82 */ + , /* SODIMM 70 */ + ; /* SODIMM 72 */ + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + /* Avoid backfeeding with removed card power */ + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + /* + * On-module Wi-Fi/BT or type specific SDHC interface + * (e.g. on X52 extension slot of Verdin Development Board) + */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + , + , + , + , + , + ; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + ; /* PMIC_WDI */ + }; + + pinctrl_wifi_ctrl: wifictrlgrp { + fsl,pins = + , /* WIFI_WKUP_BT */ + , /* WIFI_W_WKUP_HOST */ + ; /* WIFI_WKUP_WLAN */ + }; + + pinctrl_wifi_i2s: bti2sgrp { + fsl,pins = + , /* WIFI_TX_BCLK */ + , /* WIFI_TX_DATA0 */ + , /* WIFI_TX_SYNC */ + ; /* WIFI_RX_DATA0 */ + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = + ; /* PMIC_EN_WIFI */ + }; +}; diff --git a/board/toradex/verdin-imx8mm/MAINTAINERS b/board/toradex/verdin-imx8mm/MAINTAINERS index 7965975d0b..974b3a1032 100644 --- a/board/toradex/verdin-imx8mm/MAINTAINERS +++ b/board/toradex/verdin-imx8mm/MAINTAINERS @@ -2,8 +2,12 @@ Verdin iMX8M Mini M: Marcel Ziswiler W: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini S: Maintained -F: arch/arm/dts/imx8mm-verdin.dts -F: arch/arm/dts/imx8mm-verdin-u-boot.dtsi +F: arch/arm/dts/imx8mm-verdin.dtsi +F: arch/arm/dts/imx8mm-verdin-dahlia.dtsi +F: arch/arm/dts/imx8mm-verdin-dev.dtsi +F: arch/arm/dts/imx8mm-verdin-wifi.dtsi +F: arch/arm/dts/imx8mm-verdin-wifi-dev.dts +F: arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi F: board/toradex/verdin-imx8mm/ F: configs/verdin-imx8mm_defconfig F: doc/board/toradex/verdin-imx8mm.rst diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c index 037fd273ce..243c97e0ba 100644 --- a/board/toradex/verdin-imx8mm/spl.c +++ b/board/toradex/verdin-imx8mm/spl.c @@ -86,7 +86,7 @@ int power_init_board(void) int ret; if (IS_ENABLED(CONFIG_SPL_DM_PMIC_PCA9450)) { - ret = pmic_get("pmic", &dev); + ret = pmic_get("pmic@25", &dev); if (ret == -ENODEV) { puts("No pmic found\n"); return ret; diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index 34afdc5791..31dc65b3ce 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -8,7 +8,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFDE00 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mm-verdin" +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-verdin-wifi-dev" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_VERDIN_IMX8MM=y CONFIG_SPL_MMC=y