From: Adam Ford Date: Fri, 5 Apr 2024 12:32:27 +0000 (-0300) Subject: arm64: imx: imx8mn-beacon: Migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a64feb974f6642149aea089efb2ac423d4f2e294;p=u-boot.git arm64: imx: imx8mn-beacon: Migrate to OF_UPSTREAM The imx8mn-beacon boards can migrate to OF_UPSTREAM which also allows for the removal the device tree files. Signed-off-by: Adam Ford --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 4206f8c521..7d9a500592 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1087,7 +1087,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mn-bsh-smm-s2pro.dtb \ imx8mq-cm.dtb \ imx8mn-var-som-symphony.dtb \ - imx8mn-beacon-kit.dtb \ imx8mq-mnt-reform2.dtb \ imx8mq-phanbell.dtb \ imx8mp-data-modul-edm-sbc.dtb \ diff --git a/arch/arm/dts/imx8mn-beacon-kit.dts b/arch/arm/dts/imx8mn-beacon-kit.dts deleted file mode 100644 index 1392ce0258..0000000000 --- a/arch/arm/dts/imx8mn-beacon-kit.dts +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2020 Compass Electronics Group, LLC - */ - -/dts-v1/; - -#include "imx8mn.dtsi" -#include "imx8mn-beacon-som.dtsi" -#include "imx8mn-beacon-baseboard.dtsi" - -/ { - model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit"; - compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn"; - - chosen { - stdout-path = &uart2; - }; -}; diff --git a/arch/arm/dts/imx8mn-beacon-som.dtsi b/arch/arm/dts/imx8mn-beacon-som.dtsi deleted file mode 100644 index 1133cded9b..0000000000 --- a/arch/arm/dts/imx8mn-beacon-som.dtsi +++ /dev/null @@ -1,472 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2020 Compass Electronics Group, LLC - */ - -/ { - aliases { - rtc0 = &rtc; - rtc1 = &snvs_rtc; - spi0 = &flexspi; - }; - - usdhc1_pwrseq: usdhc1_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_gpio>; - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; - clocks = <&osc_32k>; - clock-names = "ext_clock"; - post-power-on-delay-ms = <80>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; -}; - -&A53_0 { - cpu-supply = <&buck2_reg>; -}; - -&A53_1 { - cpu-supply = <&buck2_reg>; -}; - -&A53_2 { - cpu-supply = <&buck2_reg>; -}; - -&A53_3 { - cpu-supply = <&buck2_reg>; -}; - -/* DDR controller is running LPDDR at 800MHz which requires 0.95V */ -&a53_opp_table { - opp-1200000000 { - opp-microvolt = <950000>; - }; -}; - -&ddrc { - operating-points-v2 = <&ddrc_opp_table>; - - ddrc_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - - opp-100M { - opp-hz = /bits/ 64 <100000000>; - }; - - opp-800M { - opp-hz = /bits/ 64 <800000000>; - }; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - phy-supply = <&buck6_reg>; - phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - -&flexspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexspi>; - status = "okay"; - - flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <80000000>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic@4b { - compatible = "rohm,bd71847"; - reg = <0x4b>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio1>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - rohm,reset-snvs-powered; - #clock-cells = <0>; - clocks = <&osc_32k 0>; - clock-output-names = "clk-32k-out"; - - regulators { - buck1_reg: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - }; - - buck2_reg: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; - }; - - buck3_reg: BUCK3 { - // BUCK5 in datasheet - regulator-name = "buck3"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - // BUCK6 in datasheet - regulator-name = "buck4"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5_reg: BUCK5 { - // BUCK7 in datasheet - regulator-name = "buck5"; - regulator-min-microvolt = <1605000>; - regulator-max-microvolt = <1995000>; - regulator-boot-on; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - // BUCK8 in datasheet - regulator-name = "buck6"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - eeprom@50 { - compatible = "microchip,24c64", "atmel,24c64"; - pagesize = <32>; - read-only; /* Manufacturing EEPROM programmed at factory */ - reg = <0x50>; - }; - - rtc: rtc@51 { - compatible = "nxp,pcf85263"; - reg = <0x51>; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - assigned-clocks = <&clk IMX8MN_CLK_UART1>; - assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; - clocks = <&osc_32k>; - max-speed = <4000000>; - clock-names = "extclk"; - }; -}; - -&usdhc1 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - vmmc-supply = <&buck4_reg>; - vqmmc-supply = <&buck5_reg>; - bus-width = <4>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - mmc-pwrseq = <&usdhc1_pwrseq>; - status = "okay"; - - brcmf: bcrmf@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wlan>; - interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 - MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 - >; - }; - - pinctrl_flexspi: flexspigrp { - fsl,pins = < - MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 - MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 - MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 - MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 - MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 - MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 - >; - }; - - pinctrl_pmic: pmicirqgrp { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 - MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 - MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 - MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 - MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 - MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 - >; - }; - - pinctrl_usdhc1_gpio: usdhc1gpiogrp { - fsl,pins = < - MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; - - pinctrl_wlan: wlangrp { - fsl,pins = < - MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 - >; - }; -}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 2d6c85912d..3823d21d70 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -287,6 +287,7 @@ config TARGET_IMX8MN_BEACON select FSL_CAAM select ARCH_MISC_INIT select SPL_CRYPTO if SPL + imply OF_UPSTREAM config TARGET_PHYCORE_IMX8MM bool "PHYTEC PHYCORE i.MX8MM" diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 2d4cd1fd97..e8009c410a 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -11,7 +11,7 @@ CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFDE00 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mn-beacon-kit" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mn-beacon-kit" CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_IMX8MN_BEACON_2GB_LPDDR=y diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index ec933019aa..ed671cf4a7 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -11,7 +11,7 @@ CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFDE00 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mn-beacon-kit" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mn-beacon-kit" CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig index 458afba441..11c257a756 100644 --- a/configs/imx8mn_beacon_fspi_defconfig +++ b/configs/imx8mn_beacon_fspi_defconfig @@ -11,7 +11,7 @@ CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFDE00 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mn-beacon-kit" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mn-beacon-kit" CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_OF_LIBFDT_OVERLAY=y