From: Lucas Stach <dev@lynxeye.de>
Date: Thu, 7 Feb 2013 07:16:28 +0000 (+0000)
Subject: tegra: usb: various small cleanups
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a63eb6bbcc73c6bde716b23383139b8079f02144;p=u-boot.git

tegra: usb: various small cleanups

Remove unneeded headers, function prototype and stale comment, that
doesn't match the actual codebase anymore.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
---

diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
index e4165e04a5..3fdd5df066 100644
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -25,21 +25,15 @@
 #include <asm/io.h>
 #include <asm-generic/gpio.h>
 #include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
 #include <asm/arch/usb.h>
 #include <usb/ulpi.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/sys_proto.h>
-#include <asm/arch-tegra/uart.h>
 #include <libfdt.h>
 #include <fdtdec.h>
 
 #ifdef CONFIG_USB_ULPI
 	#ifndef CONFIG_USB_ULPI_VIEWPORT
 	#error	"To use CONFIG_USB_ULPI on Tegra Boards you have to also \
-			define CONFIG_USB_ULPI_VIEWPORT"
+		define CONFIG_USB_ULPI_VIEWPORT"
 	#endif
 #endif
 
@@ -191,11 +185,6 @@ void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
 	/* Enable the UTMIP PHY */
 	if (config->utmi)
 		setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
-
-	/*
-	 * TODO: where do we take the USB1 out of reset? The old code would
-	 * take USB3 out of reset, but not USB1. This code doesn't do either.
-	 */
 }
 
 /* set up the UTMI USB controller with the parameters provided */
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
index fdbd127e6c..b18c85080b 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -243,9 +243,6 @@ struct usb_ctlr {
 #define VBUS_VLD_STS			(1 << 26)
 
 
-/* Change the USB host port into host mode */
-void usb_set_host_mode(void);
-
 /* Setup USB on the board */
 int board_usb_init(const void *blob);