From: Dario Binacchi Date: Sun, 3 Sep 2023 20:48:42 +0000 (+0200) Subject: ARM: dts: stm32: add CAN support on stm32f746 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a5fc0bebeff0e64c1b42aba8c66466b15cd0d8f6;p=u-boot.git ARM: dts: stm32: add CAN support on stm32f746 commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 Linux upstream. Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory. ------------------------------------------------------------------------- | features | CAN1 | CAN2 | CAN 3 | ------------------------------------------------------------------------- | SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte | ------------------------------------------------------------------------- | Filters | 26 filters shared between CAN1 & CAN2 | 14 filters | ------------------------------------------------------------------------- Signed-off-by: Dario Binacchi Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi index c97b3d0d07..dc5c257fb5 100644 --- a/arch/arm/dts/stm32f746.dtsi +++ b/arch/arm/dts/stm32f746.dtsi @@ -221,6 +221,23 @@ status = "disabled"; }; + can3: can@40003400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40003400 0x200>; + interrupts = <104>, <105>, <106>, <107>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN3)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + st,gcan = <&gcan3>; + status = "disabled"; + }; + + gcan3: gcan@40003600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40003600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -301,6 +318,36 @@ status = "disabled"; }; + can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + + gcan1: gcan@40006600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40006600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + }; + + can2: can@40006800 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006800 0x200>; + interrupts = <63>, <64>, <65>, <66>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN2)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>; + st,can-secondary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>;