From: Sumit Garg Date: Thu, 30 Mar 2017 04:23:13 +0000 (+0530) Subject: armv8: ls1046ardb: SPL size reduction X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a52ff334c5b16e71a58fb75f35394761e645f7e9;p=u-boot.git armv8: ls1046ardb: SPL size reduction Using changes in this patch we were able to reduce approx 4k size of u-boot-spl.bin image. Following is breif description of changes to reduce SPL size: 1. Changes in board/freescale/ls1046ardb/Makefile to remove compilation of eth.c and cpld.c in case of SPL build. 2. Changes in board/freescale/ls1046ardb/ls1046ardb.c to keep only ddr_init and board_early_init_f funcations in case of SPL build. 3. Changes in ls1046a_common.h & ls1046ardb.h to remove driver specific macros due to which static data was being compiled in case of SPL build. 4. Disable MMC driver from bieng compiled in case of SPL NAND build and NAND driver from bieng compiled in case of SPL MMC build. Signed-off-by: Vinitha Pillai Signed-off-by: Sumit Garg Reviewed-by: York Sun --- diff --git a/board/freescale/ls1046aqds/Makefile b/board/freescale/ls1046aqds/Makefile index df6e5461db..6267522cc2 100644 --- a/board/freescale/ls1046aqds/Makefile +++ b/board/freescale/ls1046aqds/Makefile @@ -5,5 +5,7 @@ # obj-y += ddr.o +ifndef CONFIG_SPL_BUILD obj-y += eth.o +endif obj-y += ls1046aqds.o diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile index 348eb76ea7..b92ed0b3ec 100644 --- a/board/freescale/ls1046ardb/Makefile +++ b/board/freescale/ls1046ardb/Makefile @@ -4,7 +4,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cpld.o obj-y += ddr.o obj-y += ls1046ardb.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-y += cpld.o +endif diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 02b6c4c375..0cc508b01e 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -24,6 +24,14 @@ DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifndef CONFIG_SPL_BUILD int checkboard(void) { static const char *freq[2] = {"100.00MHZ", "156.25MHZ"}; @@ -56,13 +64,6 @@ int checkboard(void) return 0; } -int board_early_init_f(void) -{ - fsl_lsch2_early_init_f(); - - return 0; -} - int board_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; @@ -161,3 +162,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } +#endif diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index cb792961b8..164a5f3884 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -7,6 +7,23 @@ #ifndef __LS1046A_COMMON_H #define __LS1046A_COMMON_H +/* SPL build */ +#ifdef CONFIG_SPL_BUILD +#define SPL_NO_QBMAN +#define SPL_NO_FMAN +#define SPL_NO_ENV +#define SPL_NO_MISC +#define SPL_NO_QSPI +#define SPL_NO_USB +#define SPL_NO_SATA +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#define SPL_NO_MMC +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT)) +#define SPL_NO_IFC +#endif + #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE #define CONFIG_MP @@ -110,20 +127,28 @@ #define CONFIG_SYS_I2C_MXC_I2C4 /* Command line configuration */ +#ifndef SPL_NO_ENV #define CONFIG_CMD_ENV +#endif /* MMC */ +#ifndef SPL_NO_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif +#endif +#ifndef SPL_NO_QBMAN #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#endif /* FMan ucode */ +#ifndef SPL_NO_FMAN #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#endif #ifdef CONFIG_SD_BOOT /* @@ -157,6 +182,7 @@ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 +#ifndef SPL_NO_MISC /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -174,13 +200,19 @@ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 " \ MTDPARTS_DEFAULT +#endif + /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP + +#ifndef SPL_NO_MISC #define CONFIG_CMDLINE_EDITING 1 +#endif + #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 2141b8299a..e368072c28 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -51,13 +51,14 @@ #endif #endif +#ifndef SPL_NO_IFC /* IFC */ #define CONFIG_FSL_IFC - /* * NAND Flash Definitions */ #define CONFIG_NAND_FSL_IFC +#endif #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -161,7 +162,9 @@ /* * Environment */ +#ifndef SPL_NO_ENV #define CONFIG_ENV_OVERWRITE +#endif #if defined(CONFIG_SD_BOOT) #define CONFIG_ENV_IS_IN_MMC @@ -176,6 +179,7 @@ #endif /* FMan */ +#ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB @@ -196,16 +200,20 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +#endif /* QSPI device */ +#ifndef SPL_NO_QSPI #ifdef CONFIG_FSL_QSPI #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SPI_FLASH_BAR #endif +#endif /* USB */ +#ifndef SPL_NO_USB #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_HCD @@ -216,8 +224,10 @@ #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif +#endif /* SATA */ +#ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -229,7 +239,9 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#endif +#ifndef SPL_NO_MISC #define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \ "$kernel_start $kernel_size;" \ "bootm $kernel_load" @@ -238,5 +250,6 @@ "15m(u-boot),48m(kernel.itb);" \ "7e800000.flash:16m(nand_uboot)," \ "48m(nand_kernel),448m(nand_free)" +#endif #endif /* __LS1046ARDB_H__ */