From: Haiying Wang Date: Fri, 11 Feb 2011 07:25:30 +0000 (-0600) Subject: powerpc/85xx: Add P1021 specific QE and UEC support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a52d2f816dac9cf516b4c795d44ce42cbe6aacb3;p=u-boot.git powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index e530494102..c4c156d737 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include #include +#include #include #include @@ -156,7 +157,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif int i; #ifdef CONFIG_QE - u32 qe_ratio; + __maybe_unused u32 qe_ratio; #endif plat_ratio = (gur->porpllsr) & 0x0000003e; @@ -184,10 +185,15 @@ void get_sys_info (sys_info_t * sysInfo) #endif #ifdef CONFIG_QE +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + sysInfo->freqQE = sysInfo->freqSystemBus; +#else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif +#endif #ifdef CONFIG_SYS_DPAA_FMAN sysInfo->freqFMan[0] = sysInfo->freqSystemBus; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4228161c62..59aeb31087 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -115,6 +115,9 @@ #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 /* P1013 is single core version of P1022 */ #elif defined(CONFIG_P1013) @@ -155,6 +158,9 @@ #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 /* P1017 is single core version of P1023 */ #elif defined(CONFIG_P1017) @@ -185,6 +191,9 @@ #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 #elif defined(CONFIG_P1022) #define CONFIG_MAX_CPUS 2 @@ -225,6 +234,9 @@ #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 /* P2010 is single core version of P2020 */ #elif defined(CONFIG_P2010) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index d26d648b13..7beb6a7bc5 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1923,6 +1923,19 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SD_DATA 0x80000000 #define MPC85xx_PMUXCR_SDHC_CD 0x40000000 #define MPC85xx_PMUXCR_SDHC_WP 0x20000000 +#define MPC85xx_PMUXCR_QE0 0x00008000 +#define MPC85xx_PMUXCR_QE1 0x00004000 +#define MPC85xx_PMUXCR_QE2 0x00002000 +#define MPC85xx_PMUXCR_QE3 0x00001000 +#define MPC85xx_PMUXCR_QE4 0x00000800 +#define MPC85xx_PMUXCR_QE5 0x00000400 +#define MPC85xx_PMUXCR_QE6 0x00000200 +#define MPC85xx_PMUXCR_QE7 0x00000100 +#define MPC85xx_PMUXCR_QE8 0x00000080 +#define MPC85xx_PMUXCR_QE9 0x00000040 +#define MPC85xx_PMUXCR_QE10 0x00000020 +#define MPC85xx_PMUXCR_QE11 0x00000010 +#define MPC85xx_PMUXCR_QE12 0x00000008 u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ u8 res6[8]; u32 devdisr; /* Device disable control */ @@ -1956,29 +1969,36 @@ typedef struct ccsr_gur { u8 res9[12]; u32 pvr; /* Processor version */ u32 svr; /* System version */ - u8 res10a[8]; + u8 res10[8]; u32 rstcr; /* Reset control */ #if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569) - u8 res10b[76]; + u8 res11a[76]; par_io_t qe_par_io[7]; - u8 res10c[1600]; + u8 res11b[1600]; +#elif defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + u8 res11a[12]; + u32 iovselsr; + u8 res11b[60]; + par_io_t qe_par_io[3]; + u8 res11c[1496]; #else - u8 res10b[1868]; + u8 res11a[1868]; #endif u32 clkdvdr; /* Clock Divide register */ - u8 res10d[1532]; + u8 res12[1532]; u32 clkocr; /* Clock out select */ - u8 res11[12]; + u8 res13[12]; u32 ddrdllcr; /* DDR DLL control */ - u8 res12[12]; + u8 res14[12]; u32 lbcdllcr; /* LBC DLL control */ - u8 res13[248]; + u8 res15[248]; u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */ u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */ u32 ddrioovcr; /* DDR IO Override Control */ u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */ u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */ - u8 res15[61648]; + u8 res16[61648]; } ccsr_gur_t; #endif diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 282ab23751..811e3fc315 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006-2011 Freescale Semiconductor, Inc. * * Dave Liu * @@ -588,9 +588,27 @@ static void phy_change(struct eth_device *dev) { uec_private_t *uec = (uec_private_t *)dev->priv; +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* QE9 and QE12 need to be set for enabling QE MII managment signals */ + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + /* Update the link, speed, duplex */ uec->mii_info->phyinfo->read_status(uec->mii_info); +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* + * QE12 is muxed with LBCTL, it needs to be released for enabling + * LBCTL signal for LBC usage. + */ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + /* Adjust the interface according to speed */ adjust_link(dev); } @@ -1198,10 +1216,21 @@ static int uec_init(struct eth_device* dev, bd_t *bd) uec_private_t *uec; int err, i; struct phy_info *curphy; +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif uec = (uec_private_t *)dev->priv; if (uec->the_first_run == 0) { +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* QE9 and QE12 need to be set for enabling QE MII managment signals */ + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + err = init_phy(dev); if (err) { printf("%s: Cannot initialize PHY, aborting.\n", @@ -1228,6 +1257,12 @@ static int uec_init(struct eth_device* dev, bd_t *bd) udelay(100000); } while (1); +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* QE12 needs to be released for enabling LBCTL signal*/ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + if (err || i <= 0) printf("warning: %s: timeout on PHY link\n", dev->name);