From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 20:08:00 +0000 (+0100) Subject: at91sam9/at91cap: move common led management to cpu X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a484b00b86e72ac6da6ee4fce13dbc6b256672fe;p=u-boot.git at91sam9/at91cap: move common led management to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c index a137c2a952..14aea994e9 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/board/atmel/at91cap9adk/led.c @@ -28,50 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PC29 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_output(RED_LED, 0); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 0); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c index ddc375f267..2424d27fbd 100644 --- a/board/atmel/at91sam9260ek/led.c +++ b/board/atmel/at91sam9260ek/led.c @@ -28,37 +28,14 @@ #include #include -#define RED_LED AT91_PIN_PA9 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); } diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c index eb2bb23411..5d1c5f2f8b 100644 --- a/board/atmel/at91sam9261ek/led.c +++ b/board/atmel/at91sam9261ek/led.c @@ -28,51 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PA23 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c index eb8d6ca04f..82c5388643 100644 --- a/board/atmel/at91sam9263ek/led.c +++ b/board/atmel/at91sam9263ek/led.c @@ -28,51 +28,17 @@ #include #include -#define RED_LED AT91_PIN_PB7 /* this is the power led */ -#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | 1 << AT91SAM9263_ID_PIOCDE); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c index 8a7d8e0bf7..9634cc03e1 100644 --- a/board/atmel/at91sam9rlek/led.c +++ b/board/atmel/at91sam9rlek/led.c @@ -28,50 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PD14 /* this is the power led */ -#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile index e547ab58c3..95bb59d35a 100644 --- a/cpu/arm926ejs/at91/Makefile +++ b/cpu/arm926ejs/at91/Makefile @@ -45,6 +45,7 @@ ifdef CONFIG_AT91SAM9RL COBJS-y += at91sam9rl_serial.o COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9rl_spi.o endif +COBJS-$(CONFIG_AT91_LED) += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += spi.o COBJS-y += timer.o COBJS-y += usb.o diff --git a/cpu/arm926ejs/at91/led.c b/cpu/arm926ejs/at91/led.c new file mode 100644 index 0000000000..be68f5958a --- /dev/null +++ b/cpu/arm926ejs/at91/led.c @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifdef CONFIG_RED_LED +void red_LED_on(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 0); +} +#endif + +#ifdef CONFIG_GREEN_LED +void green_LED_on(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 1); +} +#endif + +#ifdef CONFIG_YELLOW_LED +void yellow_LED_on(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); +} + +void yellow_LED_off(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); +} +#endif diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 01da99b82c..d8e6a29f6e 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -70,6 +70,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 2f1a41f646..e348833346 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -58,6 +58,11 @@ #undef CONFIG_USART2 #define CONFIG_USART3 1 /* USART 3 is DBGU */ +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index ebecfa4099..b119d96d53 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -69,6 +69,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 09b871a5e9..979d7a38c9 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -70,6 +70,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5bef1fe975..5d837a07af 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -69,6 +69,12 @@ #define CONFIG_ATMEL_LCD_RGB565 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /*