From: Tom Rini Date: Tue, 10 Jan 2023 16:19:28 +0000 (-0500) Subject: global: Remove unused CONFIG defines X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a3fda0d30afa5e931520006351752cfb9c0103dd;p=u-boot.git global: Remove unused CONFIG defines Remove some CONFIG symbols and related comments, etc, that are unused within the code itself at this point. Signed-off-by: Tom Rini --- diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 9e76a4a9e0..78a9cc173a 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -17,10 +17,6 @@ #include #include -#ifndef CONFIG_SYS_PHY_UBOOT_BASE -#define CONFIG_SYS_PHY_UBOOT_BASE CFG_SYS_UBOOT_BASE -#endif - /* ************************************************************************* * @@ -88,7 +84,7 @@ cpu_init_crit: /* Prepare to disable the MMU */ adr r2, mmu_disable_phys - sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_TEXT_BASE) + sub r2, r2, #(CFG_SYS_UBOOT_BASE - CONFIG_TEXT_BASE) b mmu_disable .align 5 diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 309039347c..24f3b4e9ba 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -126,6 +126,4 @@ #define ATMEL_PIO_PORTS 4 /* theese SoCs have 4 PIO */ #define ATMEL_PMC_UHP AT91RM9200_PMC_UHP -#define CONFIG_SYS_ATMEL_CPU_NAME "AT91RM9200" - #endif diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index dab8b26a70..0c23744a86 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -13,7 +13,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ @@ -36,7 +35,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) /* Timer */ @@ -104,7 +102,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) /* Timer */ @@ -127,7 +124,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC) @@ -150,8 +146,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) -#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC0) @@ -174,7 +168,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC0) @@ -221,8 +214,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) -#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ @@ -245,7 +236,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ @@ -268,9 +258,6 @@ #include #include -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) -#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) - #if (CFG_SYS_UART_PORT < 4) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + \ (CFG_SYS_UART_PORT * 0x4000)) @@ -303,9 +290,6 @@ #include #ifdef CONFIG_FSLDMAFEC -#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) -#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) - #define FEC0_RX_TASK 0 #define FEC0_TX_TASK 1 #define FEC0_RX_PRIORITY 6 diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index a7e1df104d..35142508c3 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -92,7 +92,6 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) } #if defined(T1040_TDM_QUIRK_CCSR_BASE) -#define CONFIG_MEM_HOLE_16M 0x1000000 /* * Extract hwconfig from environment. * Search for tdm entry in hwconfig. @@ -103,8 +102,7 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) /* Reserve the memory hole created by TDM LAW, so OSes dont use it */ if (tdm_hwconfig_enabled) { - off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, - CONFIG_MEM_HOLE_16M); + off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, SZ_16); if (off < 0) printf("Failed to reserve memory for tdm: %s\n", fdt_strerror(off)); diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19e63ebf38..f7e1a80774 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -979,37 +979,6 @@ #define PVR_5200 0x80822011 #define PVR_5200B 0x80822014 -/* - * 405EX/EXr CHIP_21 Errata - */ -#ifdef CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY -#define CONFIG_SYS_4xx_CHIP_21_ERRATA -#define CONFIG_405EX_CHIP21_PVR_REV_C PVR_405EX1_RC -#define CONFIG_405EX_CHIP21_PVR_REV_D PVR_405EX1_RD -#define CONFIG_405EX_CHIP21_ECID3_REV_D 0x0 -#endif - -#ifdef CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY -#define CONFIG_SYS_4xx_CHIP_21_ERRATA -#define CONFIG_405EX_CHIP21_PVR_REV_C PVR_405EX2_RC -#define CONFIG_405EX_CHIP21_PVR_REV_D PVR_405EX2_RD -#define CONFIG_405EX_CHIP21_ECID3_REV_D 0x1 -#endif - -#ifdef CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY -#define CONFIG_SYS_4xx_CHIP_21_ERRATA -#define CONFIG_405EX_CHIP21_PVR_REV_C PVR_405EXR1_RC -#define CONFIG_405EX_CHIP21_PVR_REV_D PVR_405EXR1_RD -#define CONFIG_405EX_CHIP21_ECID3_REV_D 0x2 -#endif - -#ifdef CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY -#define CONFIG_SYS_4xx_CHIP_21_ERRATA -#define CONFIG_405EX_CHIP21_PVR_REV_C PVR_405EXR2_RC -#define CONFIG_405EX_CHIP21_PVR_REV_D PVR_405EXR2_RD -#define CONFIG_405EX_CHIP21_ECID3_REV_D 0x3 -#endif - /* * System Version Register */ diff --git a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c index ee6d2bb001..4dbd847d42 100644 --- a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c +++ b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_I2C_EEPROM_ADDR_P1 0x51 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 static iomux_v3_cfg_t const eeprom_pads[] = { IMX8MQ_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 0e026bb3d8..9ae3e5e35d 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -20,14 +20,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ -#define CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ (64 * 1024) -#endif - -#ifndef CONFIG_SYS_BOOTM_LEN -#define CONFIG_SYS_BOOTM_LEN (64 << 20) -#endif - struct spl_fit_info { const void *fit; /* Pointer to a valid FIT blob */ size_t ext_data_offset; /* Offset to FIT external data (end of FIT) */ @@ -408,7 +400,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY)) return 0; - if (CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)) { +#if CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY) void *tmpbuffer = NULL; for (; ; index++) { @@ -462,7 +454,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, free(tmpbuffer); if (ret) return ret; - } +#endif /* Try to make space, so we can inject details on the loadables */ ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192); if (ret < 0) diff --git a/doc/README.socfpga b/doc/README.socfpga index 4d73398eb9..e5adb62102 100644 --- a/doc/README.socfpga +++ b/doc/README.socfpga @@ -6,16 +6,6 @@ This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore based SOCFPGA. To know more about the hardware itself, please refer to www.altera.com. - -socfpga_dw_mmc --------------- - -Here are macro and detailed configuration required to enable DesignWare SDMMC -controller support within SOCFPGA - -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 --> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM - --------------------------------------------------------------------- Cyclone 5 / Arria 5 generating the handoff header files for U-Boot SPL --------------------------------------------------------------------- diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index c72839eb01..ed8ba47de4 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -88,13 +88,6 @@ DECLARE_GLOBAL_DATA_PTR; # define I2C_SOFT_DECLARATIONS #endif -#if !defined(CONFIG_SYS_I2C_SOFT_SPEED) -#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED -#endif -#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE) -#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE -#endif - /*----------------------------------------------------------------------- * Definitions */ diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index e2bd32697e..3ac0b19402 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -86,13 +86,7 @@ static bool fm_debug; #endif #else #ifdef CONFIG_MTD_UBI_FASTMAP -#if !defined(CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT) -#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 0 -#endif static bool fm_autoconvert = CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT; -#if !defined(CONFIG_MTD_UBI_FM_DEBUG) -#define CONFIG_MTD_UBI_FM_DEBUG 0 -#endif static bool fm_debug = CONFIG_MTD_UBI_FM_DEBUG; #endif #endif diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index a0424505bd..0a1fe56091 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -168,9 +168,7 @@ struct descriptor { /* A generic descriptor. */ unsigned char params[0]; }; -#define CONFIG_SYS_CMD_EL 0x8000 #define CONFIG_SYS_CMD_SUSPEND 0x4000 -#define CONFIG_SYS_CMD_INT 0x2000 #define CONFIG_SYS_CMD_IAS 0x0001 /* individual address setup */ #define CONFIG_SYS_CMD_CONFIGURE 0x0002 /* configure */ diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c index 8c9afdf79a..7e1922e1c4 100644 --- a/drivers/net/mvpp2.c +++ b/drivers/net/mvpp2.c @@ -66,8 +66,6 @@ do { \ #define NET_SKB_PAD max(32, MVPP2_CPU_D_CACHE_LINE_SIZE) -#define CONFIG_NR_CPUS 1 - /* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */ #define WRAP (2 + ETH_HLEN + 4 + 32) #define MTU 1500 diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c index aadd54bfd4..72a13d3052 100644 --- a/drivers/video/vidconsole-uclass.c +++ b/drivers/video/vidconsole-uclass.c @@ -19,11 +19,6 @@ #include /* Bitmap font for code page 437 */ #include -/* By default we scroll by a single line */ -#ifndef CONFIG_CONSOLE_SCROLL_LINES -#define CONFIG_CONSOLE_SCROLL_LINES 1 -#endif - int vidconsole_putc_xy(struct udevice *dev, uint x, uint y, char ch) { struct vidconsole_ops *ops = vidconsole_get_ops(dev); diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c index 69ef736d4c..35955a5df7 100644 --- a/drivers/video/videomodes.c +++ b/drivers/video/videomodes.c @@ -7,8 +7,7 @@ /************************************************************************ Get Parameters for the video mode: - The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE. - If undefined, default video mode is set to 0x301 + The default video mode is set to 0x301 Parameters can be set via the variable "videomode" in the environment. 2 diferent ways are possible: "videomode=301" - 301 is a hexadecimal number describing the VESA diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h index aefe4ef94a..405f4e1fc2 100644 --- a/drivers/video/videomodes.h +++ b/drivers/video/videomodes.h @@ -6,10 +6,6 @@ #include -#ifndef CONFIG_SYS_DEFAULT_VIDEO_MODE -#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x301 -#endif - /* Some mode definitions */ #define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ #define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 24229f6bc4..f336c6a23d 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -50,13 +50,12 @@ compute_dimm_parameters(const unsigned int ctrl_num, * * All data structures have to be on the stack */ -#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR typedef struct { generic_spd_eeprom_t - spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR]; + spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR]; struct dimm_params_s - dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR]; + dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR]; memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS]; common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS]; fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS]; diff --git a/include/fsl_usb.h b/include/fsl_usb.h index c0f076b06d..a37a6e51b6 100644 --- a/include/fsl_usb.h +++ b/include/fsl_usb.h @@ -43,10 +43,8 @@ struct ccsr_usb_phy { #define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) #define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) #define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV (1 << 0) #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13) #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK #define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK (5 << 4) #define CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK (6 << 16) @@ -55,7 +53,6 @@ struct ccsr_usb_phy { #define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4) #define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) #define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0) #define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN (1 << 7) #define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK (3 << 4)