From: Peng Fan Date: Thu, 5 May 2022 11:05:59 +0000 (+0800) Subject: imx: imx8mp_evk: enable pinctrl_wdog in SPL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a38ed61643a4cf0f124798cc982be8402173d2e0;p=u-boot.git imx: imx8mp_evk: enable pinctrl_wdog in SPL Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan --- diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi index 7aa908304a..f43eb6238d 100644 --- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi @@ -43,6 +43,10 @@ u-boot,dm-spl; }; +&pinctrl_wdog { + u-boot,dm-spl; +}; + &gpio1 { u-boot,dm-spl; }; diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c index fb6c61c39e..8971a827df 100644 --- a/board/freescale/imx8mp_evk/imx8mp_evk.c +++ b/board/freescale/imx8mp_evk/imx8mp_evk.c @@ -20,23 +20,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static iomux_v3_cfg_t const wdog_pads[] = { - MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - return 0; -} - static void setup_fec(void) { struct iomuxc_gpr_base_regs *gpr = diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c index 503a752ae9..a2732148f2 100644 --- a/board/freescale/imx8mp_evk/spl.c +++ b/board/freescale/imx8mp_evk/spl.c @@ -134,8 +134,6 @@ void board_init_f(ulong dummy) init_uart_clk(1); - board_early_init_f(); - ret = spl_early_init(); if (ret) { debug("spl_init() failed: %d\n", ret); diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index 081f7e08f8..c3ffed8599 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -27,7 +27,6 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb" -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y