From: dzu@denx.de Date: Wed, 19 Apr 2006 09:52:46 +0000 (+0200) Subject: Update for NC650 board. Add NC650 based CP850 configuration. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a367d42640e3cb10afeb4950bd5beb1c7f6cf107;p=u-boot.git Update for NC650 board. Add NC650 based CP850 configuration. Signed-off-by: dzu@denx.de --- diff --git a/CHANGELOG b/CHANGELOG index cbc18d9369..6edcd25a9d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update for NC650 board: + - Support rev1 and rev2 hardware + - adapt to new NAND layer + - add CP850 configuration based on NC650 + * MPC5200: enable snooping of DMA transactions on XLB even if no PCI is configured; othrwise DMA accesses aren't cache coherent which causes for example USB to fail. diff --git a/Makefile b/Makefile index 9b93463000..249c9f03f6 100644 --- a/Makefile +++ b/Makefile @@ -633,8 +633,21 @@ NETTA2_config: unconfig } @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 -NC650_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx nc650 +NC650_Rev1_config \ +NC650_Rev2_config \ +CP850_config: unconfig + @ >include/config.h + @[ -z "$(findstring CP850,$@)" ] || \ + { echo "#define CONFIG_CP850 1" >>include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + } + @[ -z "$(findstring Rev1,$@)" ] || \ + { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \ + } + @[ -z "$(findstring Rev2,$@)" ] || \ + { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + } + @./mkconfig -a NC650 ppc mpc8xx nc650 NX823_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx nx823 diff --git a/board/nc650/Makefile b/board/nc650/Makefile index a4dd85f508..8dc4934f79 100644 --- a/board/nc650/Makefile +++ b/board/nc650/Makefile @@ -1,4 +1,5 @@ # +# (C) Copyright 2006 Detlev Zundel, dzu@denx.de # (C) Copyright 2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -25,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o +OBJS = $(BOARD).o nand.o flash.o $(LIB): .depend $(OBJS) $(AR) crv $@ $(OBJS) diff --git a/board/nc650/config.mk b/board/nc650/config.mk index fa8ba3186c..5b2284aec4 100644 --- a/board/nc650/config.mk +++ b/board/nc650/config.mk @@ -1,4 +1,5 @@ # +# (C) Copyright 2006 Detlev Zundel, dzu@denx.de # (C) Copyright 2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -26,3 +27,4 @@ # TEXT_BASE = 0x40700000 +BOARDLIBS = drivers/nand/libnand.a diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c index fe96b93816..c90ac9c955 100644 --- a/board/nc650/nc650.c +++ b/board/nc650/nc650.c @@ -1,4 +1,5 @@ /* + * (C) Copyright 2006 Detlev Zundel, dzu@denx.de * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -108,7 +109,16 @@ const uint nand_flash_table[] = { int checkboard (void) { - puts ("Board: NC650\n"); +#if !defined(CONFIG_CP850) + puts ("Board: NC650"); +#else + puts ("Board: CP850"); +#endif +#if defined(CONFIG_IDS852_REV1) + puts (" with IDS852 rev 1 module\n"); +#elif defined(CONFIG_IDS852_REV2) + puts (" with IDS852 rev 2 module\n"); +#endif return 0; } @@ -241,13 +251,61 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize return (get_ram_size(base, maxsize)); } -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -void nand_init(void) -{ - extern unsigned long nand_probe(unsigned long physadr); - unsigned long totlen = nand_probe(CFG_NAND_BASE); +#if defined(CONFIG_CP850) + +#define DPRAM_VARNAME "KP850DIP" +#define PARAM_ADDR 0x7C0 +#define NAME_ADDR 0x7F8 +#define BOARD_NAME "KP01" +#define DEFAULT_LB "241111" - printf ("%4lu MB\n", totlen >> 20); +int misc_init_r(void) +{ + int iCompatMode = 0; + char *pParam = NULL; + char *envlb; + + /* + First byte in CPLD read address space signals compatibility mode + 0 - cp850 + 1 - kp852 + */ + pParam = (char*)(CFG_CPLD_BASE); + if( *pParam != 0) + iCompatMode = 1; + + if ( iCompatMode != 0) { + /* + In KP852 compatibility mode we have to write to + DPRAM as early as possible the binary coded + line config and board name. + The line config is derived from the environment + variable DPRAM_VARNAME by converting from ASCII + to binary per character. + */ + if ( (envlb = getenv ( DPRAM_VARNAME )) == 0) { + setenv( DPRAM_VARNAME, DEFAULT_LB); + envlb = DEFAULT_LB; + } + + /* Status string */ + printf("Mode: KP852(LB=%s)\n", envlb); + + /* copy appl init */ + pParam = (char*)(DPRAM_BASE_ADDR + PARAM_ADDR); + while (*envlb) { + *(pParam++) = *(envlb++) - '0'; + } + *pParam = '\0'; + + /* copy board id */ + pParam = (char*)(DPRAM_BASE_ADDR + NAME_ADDR); + strcpy( pParam, BOARD_NAME); + } else { + puts("Mode: CP850\n"); + } + + return 0; } #endif diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 3c59df4f45..8da29c4afc 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2006 Detlev Zundel, dzu@denx.de * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -65,6 +66,11 @@ #define CFG_8XX_XIN CONFIG_8xx_OSCLK #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "ids" +#define CONFIG_BOOT_RETRY_TIME 900 +#define CONFIG_BOOT_RETRY_MIN 30 #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" @@ -75,7 +81,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_WATCHDOG /* watchdog enabled */ #undef CONFIG_STATUS_LED /* Status LED disabled */ @@ -96,12 +102,26 @@ /* * Software (bit-bang) I2C driver configuration */ +#if defined(CONFIG_IDS852_REV1) + #define SCL 0x1000 /* PA 3 */ #define SDA 0x2000 /* PA 2 */ #define __I2C_DIR immr->im_ioport.iop_padir #define __I2C_DAT immr->im_ioport.iop_padat #define __I2C_PAR immr->im_ioport.iop_papar + +#elif defined(CONFIG_IDS852_REV2) + +#define SCL 0x0002 /* PB 30 */ +#define SDA 0x0001 /* PB 31 */ + +#define __I2C_PAR immr->im_cpm.cp_pbpar +#define __I2C_DIR immr->im_cpm.cp_pbdir +#define __I2C_DAT immr->im_cpm.cp_pbdat + +#endif + #define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ __I2C_DIR |= (SDA|SCL); } #define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) @@ -229,17 +249,6 @@ #define ADDR_COLUMN 1 #define NAND_NO_RB -#define NAND_WAIT_READY(nand) udelay(12) -#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND(d, adr + 2) -#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND(d, adr + 1) -#define WRITE_NAND(d, adr) (*(volatile uint8_t *)(adr) = (uint8_t)(d)) -#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) -#define NAND_DISABLE_CE(nand) /* nop */ -#define NAND_ENABLE_CE(nand) /* nop */ -#define NAND_CTL_CLRALE(nandptr) /* nop */ -#define NAND_CTL_SETALE(nandptr) /* nop */ -#define NAND_CTL_CLRCLE(nandptr) /* nop */ -#define NAND_CTL_SETCLE(nandptr) /* nop */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 @@ -312,7 +321,8 @@ #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) /* - * BR2 and OR2 (NAND Flash) - now addressed through UPMB + * BR2 and OR2 (NAND Flash) - addressed through UPMB on rev 1 + * rev2 only uses the chipselect */ #define CFG_NAND_BASE 0x50000000 #define CFG_NAND_SIZE 0x04000000 @@ -337,6 +347,18 @@ #define CFG_OR3_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM) #define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V) +/* + * BR4 and OR4 (CPLD) + */ +#define CFG_CPLD_BASE 0x80000000 /* CPLD */ +#define CFG_CPLD_SIZE 0x10000 /* only 16 used */ + +#define CFG_OR_TIMING_CPLD (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ + OR_SCY_1_CLK) + +#define CFG_BR4_PRELIM ((CFG_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR4_PRELIM (((-CFG_CPLD_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_CPLD) + /* * BR5 and OR5 (SRAM) */ @@ -349,6 +371,16 @@ #define CFG_BR5_PRELIM ((CFG_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) #define CFG_OR5_PRELIM (((-CFG_SRAM_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_SRAM) +#if defined(CONFIG_CP850) +/* + * BR6 and OR6 (DPRAM) - only on CP850 + */ +#define CFG_OR6_PRELIM 0xffff8170 +#define CFG_BR6_PRELIM 0xa0000401 +#define DPRAM_BASE_ADDR 0xa0000000 + +#define CONFIG_MISC_INIT_R 1 +#endif /* * 4096 Rows from SDRAM example configuration @@ -413,14 +445,12 @@ #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ -/* #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=nc650-0,nand0=nc650-nand" #define MTDPARTS_DEFAULT "mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \ - "2560k(cramfs1),2560k(cramfs2)," \ - "256k(u-boot),256k(env);" \ - "nc650-nand:4m(nand1),28m(nand2)" -*/ + "4m(cramfs1),1m(cramfs2)," \ + "256k(u-boot),128k(env);" \ + "nc650-nand:4m(jffs1),28m(jffs2)" #endif /* __CONFIG_H */