From: Peng Fan Date: Wed, 23 Oct 2019 01:43:30 +0000 (+0000) Subject: spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a335f80502131e9e2b58a0281f5fc78018295ea4;p=u-boot.git spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition On i.MX8, when booting from eMMC boot partition, the whole flash.bin is stored in boot partition, however SPL switches to user partition during the init of mmc driver: spl_mmc_load() -> mmc_init() Then it tries to load the container image in spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header. So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch to address this issue. Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch is not correct, so let's move it after eMMC partition switch. Reported-by: Anatolij Gustschin Signed-off-by: Peng Fan --- diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 34e1e73d80..2ede096e61 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -343,8 +343,6 @@ int spl_mmc_load(struct spl_image_info *spl_image, } } - raw_sect = spl_mmc_get_uboot_raw_sector(mmc); - boot_mode = spl_boot_mode(bootdev->boot_device); err = -EINVAL; switch (boot_mode) { @@ -383,6 +381,9 @@ int spl_mmc_load(struct spl_image_info *spl_image, if (!err) return err; } + + raw_sect = spl_mmc_get_uboot_raw_sector(mmc); + #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION err = mmc_load_image_raw_partition(spl_image, mmc, raw_part, raw_sect);