From: Wolfgang Grandegger <wg@grandegger.com>
Date: Wed, 11 Feb 2009 17:38:20 +0000 (+0100)
Subject: MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a318234878c346e673b2ef8dc4b14b338fe7fc2b;p=u-boot.git

MPC85xx: TQM85xx: make standard PCI/PCI-X configurable

The TQM8548_AG module does not have the standard PCI/PCI-X interface
connected but just the PCI Express interface . So far it was not
possible to disable it without disabling the complete PCI interface
(CONFIG_PCI) including PCI Express.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---

diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index c414344c8e..e1e75b83ab 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -540,9 +540,9 @@ static int first_free_busno;
 extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
 extern void fsl_pci_init(struct pci_controller *hose);
 
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#endif /* CONFIG_PCI1 */
 
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
@@ -551,7 +551,7 @@ static struct pci_controller pcie1_hose;
 static inline void init_pci1(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
@@ -626,9 +626,9 @@ static inline void init_pci1(void)
 	} else {
 		puts ("PCI1:  disabled\n");
 	}
-#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+#else /* !CONFIG_PCI1 */
 	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
-#endif /* CONFIG_PCI || CONFIG_PCI1) */
+#endif /* CONFIG_PCI1 */
 }
 
 static inline void init_pcie1(void)
@@ -707,7 +707,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
 	ft_cpu_setup (blob, bd);
 
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
 	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index f5831ebaff..cca8255a30 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -42,13 +42,14 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
 
 #define CONFIG_PCI
+#define CONFIG_PCI1			/* PCI/PCI-X controller		*/
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCIE1			/* PCI Express interface	*/
+#endif
+
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code	*/
 #define CONFIG_PCIX_CHECK		/* PCIX olny works at 66 MHz	*/
-#ifdef CONFIG_TQM8548
-#define CONFIG_PCI1
-#define CONFIG_PCIE1
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata	*/
-#endif
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/