From: Michael Schanz Date: Thu, 10 Dec 2015 08:58:35 +0000 (+0100) Subject: cgtqmx6eval: fix pad configuration for SPI bus X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a1ed155298eeb29000d9b1033be094c0f7c45212;p=u-boot.git cgtqmx6eval: fix pad configuration for SPI bus Use the macro SETUP_IOMUX_PAD(...) rather than imx_iomux_v3_setup_multiple_pads(...) in order to setup the pin configuration for ECSPI1. ARRAY_SIZE(pads) provides the wrong size for imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in case of MX6QDL. In the particular case, the content of GPR12 is overwritten and the IPG/AHB/ATB/ATP clocks are deactivated. Therefore, the connection to the system via JTAG is not possible anymore. Furthermore, kernel version 3.0.35 hangs during bootprocess in the function etm_init(). Signed-off-by: Michael Schanz Acked-by: Otavio Salvador --- diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 5fd526d478..225de7c543 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -404,7 +404,7 @@ static void setup_iomux_uart(void) #ifdef CONFIG_MXC_SPI static void setup_spi(void) { - imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); + SETUP_IOMUX_PADS(ecspi1_pads); gpio_direction_output(IMX_GPIO_NR(3, 19), 0); } #endif