From: Marek Vasut <marex@denx.de>
Date: Tue, 21 May 2024 09:40:45 +0000 (+0200)
Subject: ARM: dts: imx8mm: Update iMX8MM Menlo board configuration
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a1136831cb7c2790ff13a3e5f1c0239715b96467;p=u-boot.git

ARM: dts: imx8mm: Update iMX8MM Menlo board configuration

Synchronize Toradex Verdin iMX8MM based MX8Menlo board configuration
with Toradex Verdin iMX8MM and enable convenience commands like cat,
hexdump, xxd.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig
index e9b18ac1be..68b24ce3fb 100644
--- a/configs/imx8mm-mx8menlo_defconfig
+++ b/configs/imx8mm-mx8menlo_defconfig
@@ -25,15 +25,19 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
+CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=1
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTCOMMAND="mmc partconf 0 distro_bootpart && load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset"
+CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="imx8mm-mx8menlo.dtb"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2081
@@ -57,19 +61,26 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # "
 # CONFIG_BOOTM_NETBSD is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_BTRFS=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -84,8 +95,9 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_PART=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="FEC"
+CONFIG_ETHPRIME="eth0"
 CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SPL_DM=y
@@ -96,16 +108,26 @@ CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_MDIO=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_SPL_PHY=y
@@ -128,6 +150,7 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
 CONFIG_USB=y
 CONFIG_SPL_USB_HOST=y
 CONFIG_USB_EHCI_HCD=y
@@ -143,3 +166,4 @@ CONFIG_SDP_LOADADDR=0x40400000
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_IMX_WATCHDOG=y
+CONFIG_HEXDUMP=y