From: Boschung, Rainer Date: Tue, 3 Jun 2014 07:05:18 +0000 (+0200) Subject: kmp204x: set CPU watchdog reset reason flag X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a09f470d49c4a6355f16fee6455d964211021e3d;p=u-boot.git kmp204x: set CPU watchdog reset reason flag Check the core timer status register (TSR) for watchdog reset, and and set the QRIO's reset reason flag REASON1[0] accordingly. This allows the appliction SW to identify the cpu watchdog as a reset reason, by setting the REASON1[0] flag in the QRIO. Signed-off-by: Rainer Boschung Signed-off-by: Valentin Longchamp Reviewed-by: York Sun --- diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index 6bc8eb85ea..225262e49c 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -80,14 +80,26 @@ int get_scl(void) #define ZL30158_RST 8 #define BFTIC4_RST 0 +#define RSTRQSR1_WDT_RR 0x00200000 +#define RSTRQSR1_SW_RR 0x00100000 int board_early_init_f(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + bool cpuwd_flag = false; /* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */ setbits_be32(&gur->ddrclkdr, 0x001f000f); + /* set reset reason according CPU register */ + if ((gur->rstrqsr1 & (RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR)) == + RSTRQSR1_WDT_RR) + cpuwd_flag = true; + + qrio_cpuwd_flag(cpuwd_flag); + /* clear CPU bits by writing 1 */ + setbits_be32(&gur->rstrqsr1, RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR); + /* set the BFTIC's prstcfg to reset at power-up and unit reset only */ qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST); /* and enable WD on it */