From: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Date: Thu, 25 May 2017 06:45:24 +0000 (+0530)
Subject: nand: zynq: Send address cycles as per onfi parameter page
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9fdde6c4bbb6840dd175f0c29dfcc791fc0c1d2a;p=u-boot.git

nand: zynq: Send address cycles as per onfi parameter page

Send address cycles as per value read from onfi parameter
page for Read and write commands instead of using a
hard coded value. This may vary for different parts and
hence use it from onfi parameter page value.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/drivers/mtd/nand/zynq_nand.c b/drivers/mtd/nand/zynq_nand.c
index 4d0ea9e6b9..e932a58bf6 100644
--- a/drivers/mtd/nand/zynq_nand.c
+++ b/drivers/mtd/nand/zynq_nand.c
@@ -84,6 +84,9 @@
 #define ZYNQ_NAND_ECC_BUSY	(1 << 6)	/* ECC block is busy */
 #define ZYNQ_NAND_ECC_MASK	0x00FFFFFF	/* ECC value mask */
 
+#define ZYNQ_NAND_ROW_ADDR_CYCL_MASK	0x0F
+#define ZYNQ_NAND_COL_ADDR_CYCL_MASK	0xF0
+
 #define ZYNQ_NAND_MIO_NUM_NAND_8BIT	13
 #define ZYNQ_NAND_MIO_NUM_NAND_16BIT	8
 
@@ -778,6 +781,7 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 {
 	struct nand_chip *chip = mtd->priv;
 	const struct zynq_nand_command_format *curr_cmd = NULL;
+	u8 addr_cycles = 0;
 	struct zynq_nand_info *xnand = (struct zynq_nand_info *)chip->priv;
 	void *cmd_addr;
 	unsigned long cmd_data = 0;
@@ -828,8 +832,18 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 	else
 		end_cmd = curr_cmd->end_cmd;
 
+	if (command == NAND_CMD_READ0 ||
+	    command == NAND_CMD_SEQIN) {
+		addr_cycles = chip->onfi_params.addr_cycles &
+				ZYNQ_NAND_ROW_ADDR_CYCL_MASK;
+		addr_cycles += ((chip->onfi_params.addr_cycles &
+				ZYNQ_NAND_COL_ADDR_CYCL_MASK) >> 4);
+	} else {
+		addr_cycles = curr_cmd->addr_cycles;
+	}
+
 	cmd_phase_addr = (unsigned long)xnand->nand_base	|
-			(curr_cmd->addr_cycles << ADDR_CYCLES_SHIFT)	|
+			(addr_cycles << ADDR_CYCLES_SHIFT)	|
 			(end_cmd_valid << END_CMD_VALID_SHIFT)		|
 			(COMMAND_PHASE)					|
 			(end_cmd << END_CMD_SHIFT)			|