From: Hans de Goede Date: Sat, 7 Mar 2015 11:01:16 +0000 (+0100) Subject: sun7i: Add support for the Wits Pro A20 DKT board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9ee54858e4cadeefa84f90c06696449165704c54;p=u-boot.git sun7i: Add support for the Wits Pro A20 DKT board The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Also see: http://www.merrii.com/en/pla_d.asp?id=163 Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ca96ff965a..17dc945c17 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -32,6 +32,7 @@ F: configs/i12-tvbox_defconfig F: configs/Linksprite_pcDuino3_defconfig F: configs/Linksprite_pcDuino3_fdt_defconfig F: configs/qt840a_defconfig +F: configs/Wits_Pro_A20_DKT_defconfig F: include/configs/sun8i.h F: configs/Ippo_q8h_v1_2_defconfig diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig new file mode 100644 index 0000000000..de42b3ce95 --- /dev/null +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -0,0 +1,15 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-wits-pro-a20-dkt.dtb" +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_VIDEO_VGA=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_DRAM_CLK=384 ++S:CONFIG_DRAM_ZQ=127 ++S:CONFIG_DRAM_EMR1=4