From: Masahiro Yamada Date: Sun, 28 Sep 2014 16:37:59 +0000 (+0900) Subject: powerpc: ppc4xx: remove board support for bluestone X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9ed3246e19a42392bf0fd676dcbbe3539cc46ec1;p=u-boot.git powerpc: ppc4xx: remove board support for bluestone This board has been orphaned for more than 6 months. It is the last board defining CONFIG_APM821XX. The code inside #ifdef CONFIG_APM821XX should be removed too. Signed-off-by: Masahiro Yamada --- diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index d525ad3bd6..56abe8dc56 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -52,9 +52,6 @@ config TARGET_ACADIA config TARGET_BAMBOO bool "Support bamboo" -config TARGET_BLUESTONE - bool "Support bluestone" - config TARGET_BUBINGA bool "Support bubinga" @@ -239,7 +236,6 @@ endchoice source "board/amcc/acadia/Kconfig" source "board/amcc/bamboo/Kconfig" -source "board/amcc/bluestone/Kconfig" source "board/amcc/bubinga/Kconfig" source "board/amcc/canyonlands/Kconfig" source "board/amcc/ebony/Kconfig" diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c index 6a485264e7..aab65d405c 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu.c +++ b/arch/powerpc/cpu/ppc4xx/cpu.c @@ -234,20 +234,6 @@ static char *bootstrap_str[] = { }; static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif -#if defined(CONFIG_APM821XX) -#define SDR0_PINSTP_SHIFT 29 -static char *bootstrap_str[] = { - "RESERVED", - "RESERVED", - "RESERVED", - "NAND (8 bits)", - "NOR (8 bits)", - "NOR (8 bits) w/PLL Bypassed", - "I2C (Addr 0x54)", - "I2C (Addr 0x52)", -}; -static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' }; -#endif #if defined(SDR0_PINSTP_SHIFT) static int bootstrap_option(void) diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index 0b27d2912d..22561231cb 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -284,7 +284,7 @@ cpu_init_f (void) reconfigure_pll(CONFIG_SYS_PLL_RECONFIG); #if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && \ - !defined(CONFIG_APM821XX) &&!defined(CONFIG_SYS_4xx_GPIO_TABLE) + !defined(CONFIG_SYS_4xx_GPIO_TABLE) /* * GPIO0 setup (select GPIO or alternate function) */ @@ -440,7 +440,7 @@ cpu_init_f (void) #if defined(CONFIG_405EX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) || defined(CONFIG_APM821XX) + defined(CONFIG_460SX) /* * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read */ diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c index 4baee7774c..3e1a7016d9 100644 --- a/arch/powerpc/cpu/ppc4xx/speed.c +++ b/arch/powerpc/cpu/ppc4xx/speed.c @@ -171,7 +171,7 @@ ulong get_PCI_freq (void) #elif defined(CONFIG_440) #if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) || defined(CONFIG_APM821XX) + defined(CONFIG_460SX) static u8 pll_fwdv_multi_bits[] = { /* values for: 1 - 16 */ 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c, @@ -232,78 +232,6 @@ u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv) return 0; } -#if defined(CONFIG_APM821XX) - -void get_sys_info(sys_info_t *sysInfo) -{ - unsigned long plld; - unsigned long temp; - unsigned long mul; - unsigned long cpudv; - unsigned long plb2dv; - unsigned long ddr2dv; - - /* Calculate Forward divisor A and Feeback divisor */ - mfcpr(CPR0_PLLD, plld); - - temp = CPR0_PLLD_FWDVA(plld); - sysInfo->pllFwdDivA = get_cpr0_fwdv(temp); - - temp = CPR0_PLLD_FDV(plld); - sysInfo->pllFbkDiv = get_cpr0_fbdv(temp); - - /* Calculate OPB clock divisor */ - mfcpr(CPR0_OPBD, temp); - temp = CPR0_OPBD_OPBDV(temp); - sysInfo->pllOpbDiv = temp ? temp : 4; - - /* Calculate Peripheral clock divisor */ - mfcpr(CPR0_PERD, temp); - temp = CPR0_PERD_PERDV(temp); - sysInfo->pllExtBusDiv = temp ? temp : 4; - - /* Calculate CPU clock divisor */ - mfcpr(CPR0_CPUD, temp); - temp = CPR0_CPUD_CPUDV(temp); - cpudv = temp ? temp : 8; - - /* Calculate PLB2 clock divisor */ - mfcpr(CPR0_PLB2D, temp); - temp = CPR0_PLB2D_PLB2DV(temp); - plb2dv = temp ? temp : 4; - - /* Calculate DDR2 clock divisor */ - mfcpr(CPR0_DDR2D, temp); - temp = CPR0_DDR2D_DDR2DV(temp); - ddr2dv = temp ? temp : 4; - - /* Calculate 'M' based on feedback source */ - mfcpr(CPR0_PLLC, temp); - temp = CPR0_PLLC_SEL(temp); - if (temp == 0) { - /* PLL internal feedback */ - mul = sysInfo->pllFbkDiv; - } else { - /* PLL PerClk feedback */ - mul = sysInfo->pllFwdDivA * sysInfo->pllFbkDiv * cpudv - * plb2dv * 2 * sysInfo->pllOpbDiv * - sysInfo->pllExtBusDiv; - } - - /* Now calculate the individual clocks */ - sysInfo->freqVCOMhz = (mul * CONFIG_SYS_CLK_FREQ) + (mul >> 1); - sysInfo->freqProcessor = sysInfo->freqVCOMhz / - sysInfo->pllFwdDivA / cpudv; - sysInfo->freqPLB = sysInfo->freqVCOMhz / - sysInfo->pllFwdDivA / cpudv / plb2dv / 2; - sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv; - sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv; - sysInfo->freqDDR = sysInfo->freqVCOMhz / - sysInfo->pllFwdDivA / cpudv / ddr2dv / 2; - sysInfo->freqUART = sysInfo->freqPLB; -} - -#else /* * AMCC_TODO: verify this routine against latest EAS, cause stuff changed * with latest EAS @@ -361,7 +289,6 @@ void get_sys_info (sys_info_t * sysInfo) return; } -#endif #elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 11b55d5a56..09a02d771c 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -664,8 +664,7 @@ _start: defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460SX) mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */ -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_APM821XX) +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) lis r1, 0x0000 ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */ mtdcr L2_CACHE_CFG,r1 @@ -694,7 +693,7 @@ _start: ori r1,r1, 0x0980 /* fourth 64k */ mtdcr ISRAM0_SB3CR,r1 #elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || \ - defined(CONFIG_460GT) || defined(CONFIG_APM821XX) + defined(CONFIG_460GT) lis r1,0x0000 /* BAS = X_0000_0000 */ ori r1,r1,0x0984 /* first 64k */ mtdcr ISRAM0_SB0CR,r1 @@ -707,8 +706,7 @@ _start: lis r1, 0x0003 ori r1,r1, 0x0984 /* fourth 64k */ mtdcr ISRAM0_SB3CR,r1 -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_APM821XX) +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) lis r2,0x7fff ori r2,r2,0xffff mfdcr r1,ISRAM1_DPC diff --git a/arch/powerpc/include/asm/apm821xx.h b/arch/powerpc/include/asm/apm821xx.h deleted file mode 100644 index d027866d3d..0000000000 --- a/arch/powerpc/include/asm/apm821xx.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tirumala R Marri - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _APM821XX_H_ -#define _APM821XX_H_ - -#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */ - -/* Memory mapped registers */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300) - -#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700) - -#define SDR0_SRST0_DMC 0x00200000 -#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */ - -/* AHB config. */ -#define AHB_TOP 0xA4 -#define AHB_BOT 0xA5 - -/* clk divisors */ -#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */ -#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */ -#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */ -#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */ -#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */ -#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */ -#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000/* PLB Early Clk Div*/ -#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ -#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */ - -/* - + * Clocking Controller - + */ -#define CPR0_CLKUPD 0x0020 -#define CPR0_PLLC 0x0040 -#define CPR0_PLLC_SEL(pllc) (((pllc) & 0x01000000) >> 24) -#define CPR0_PLLD 0x0060 -#define CPR0_PLLD_FDV(plld) (((plld) & 0xff000000) >> 24) -#define CPR0_PLLD_FWDVA(plld) (((plld) & 0x000f0000) >> 16) -#define CPR0_CPUD 0x0080 -#define CPR0_CPUD_CPUDV(cpud) (((cpud) & 0x07000000) >> 24) -#define CPR0_PLB2D 0x00a0 -#define CPR0_PLB2D_PLB2DV(plb2d) (((plb2d) & 0x06000000) >> 25) -#define CPR0_OPBD 0x00c0 -#define CPR0_OPBD_OPBDV(opbd) (((opbd) & 0x03000000) >> 24) -#define CPR0_PERD 0x00e0 -#define CPR0_PERD_PERDV(perd) (((perd) & 0x03000000) >> 24) -#define CPR0_DDR2D 0x0100 -#define CPR0_DDR2D_DDR2DV(ddr2d) (((ddr2d) & 0x06000000) >> 25) -#define CLK_ICFG 0x0140 - -#endif /* _APM821XX_H_ */ diff --git a/arch/powerpc/include/asm/ppc4xx-ebc.h b/arch/powerpc/include/asm/ppc4xx-ebc.h index 07a3fe033f..952783f961 100644 --- a/arch/powerpc/include/asm/ppc4xx-ebc.h +++ b/arch/powerpc/include/asm/ppc4xx-ebc.h @@ -53,8 +53,7 @@ #define EBC_NUM_BANKS 6 #endif -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_APM821XX) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define EBC_NUM_BANKS 3 #endif diff --git a/arch/powerpc/include/asm/ppc4xx-isram.h b/arch/powerpc/include/asm/ppc4xx-isram.h index 4d1106b124..2ae399f248 100644 --- a/arch/powerpc/include/asm/ppc4xx-isram.h +++ b/arch/powerpc/include/asm/ppc4xx-isram.h @@ -8,8 +8,7 @@ /* * Internal SRAM */ -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_APM821XX) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define ISRAM0_DCR_BASE 0x380 #else #define ISRAM0_DCR_BASE 0x020 @@ -26,8 +25,7 @@ #define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ #define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_APM821XX) +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) #define ISRAM1_DCR_BASE 0x0B0 #define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/ #define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */ @@ -41,8 +39,6 @@ #if defined(CONFIG_460EX) || defined(CONFIG_460GT) #define ISRAM1_SIZE 0x0984 /* OCM size 64k */ -#elif defined(CONFIG_APM821XX) -#define ISRAM1_SIZE 0x0784 /* OCM size 32k */ #endif /* @@ -51,7 +47,7 @@ #if defined (CONFIG_440GX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) || defined(CONFIG_APM821XX) + defined(CONFIG_460SX) #define L2_CACHE_BASE 0x030 #define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */ #define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */ diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h index 12d6d038c7..e6fed83bf1 100644 --- a/arch/powerpc/include/asm/ppc4xx-sdram.h +++ b/arch/powerpc/include/asm/ppc4xx-sdram.h @@ -276,7 +276,7 @@ */ #if defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) || defined(CONFIG_APM821XX) + defined(CONFIG_460SX) #define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */ #define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000)) #define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2) @@ -349,7 +349,7 @@ /* * Memory controller registers */ -#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX) +#if defined(CONFIG_405EX) #define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */ #define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */ #define SDRAM_BEARL 0x02 /* PLB bus error address low */ @@ -359,9 +359,9 @@ #define SDRAM_PLBOPT 0x08 /* PLB slave options */ #define SDRAM_PUABA 0x09 /* PLB upper address base */ #define SDRAM_MCSTAT 0x1F /* memory controller status */ -#else /* CONFIG_405EX || CONFIG_APM821XX */ +#else /* CONFIG_405EX */ #define SDRAM_MCSTAT 0x14 /* memory controller status */ -#endif /* CONFIG_405EX || CONFIG_APM821XX */ +#endif /* CONFIG_405EX */ #define SDRAM_MCOPT1 0x20 /* memory controller options 1 */ #define SDRAM_MCOPT2 0x21 /* memory controller options 2 */ #define SDRAM_MODT0 0x22 /* on die termination for bank 0 */ @@ -407,12 +407,12 @@ #define SDRAM_MEMODE 0x89 /* memory extended mode */ #define SDRAM_ECCES 0x98 /* ECC error status */ #define SDRAM_CID 0xA4 /* core ID */ -#if !defined(CONFIG_405EX) && !defined(CONFIG_APM821XX) +#if !defined(CONFIG_405EX) #define SDRAM_RID 0xA8 /* revision ID */ #endif #define SDRAM_FCSR 0xB0 /* feedback calibration status */ #define SDRAM_RTSR 0xB1 /* run time status tracking */ -#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX) +#if defined(CONFIG_405EX) #define SDRAM_RID 0xF8 /* revision ID */ #endif diff --git a/arch/powerpc/include/asm/ppc4xx-uic.h b/arch/powerpc/include/asm/ppc4xx-uic.h index 05b4690a5c..58e65c1336 100644 --- a/arch/powerpc/include/asm/ppc4xx-uic.h +++ b/arch/powerpc/include/asm/ppc4xx-uic.h @@ -15,7 +15,7 @@ */ #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) || defined(CONFIG_APM821XX) + defined(CONFIG_460SX) #define UIC_MAX 4 #elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_405EX) @@ -236,8 +236,7 @@ #define VECNUM_ETH0 (32 + 28) #endif /* CONFIG_440SPE */ -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_APM821XX) +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) /* UIC 0 */ #define VECNUM_UIC2NCI 10 #define VECNUM_UIC2CI 11 diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h index e6a3bff079..b8b0ff9f25 100644 --- a/arch/powerpc/include/asm/ppc4xx.h +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -56,10 +56,6 @@ #include #endif -#if defined(CONFIG_APM821XX) -#include -#endif - /* * Common registers for all SoC's */ diff --git a/board/amcc/bluestone/Kconfig b/board/amcc/bluestone/Kconfig deleted file mode 100644 index 255e013777..0000000000 --- a/board/amcc/bluestone/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_BLUESTONE - -config SYS_BOARD - default "bluestone" - -config SYS_VENDOR - default "amcc" - -config SYS_CONFIG_NAME - default "bluestone" - -endif diff --git a/board/amcc/bluestone/MAINTAINERS b/board/amcc/bluestone/MAINTAINERS deleted file mode 100644 index 9eb9bbd01b..0000000000 --- a/board/amcc/bluestone/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BLUESTONE BOARD -#M: Tirumala Marri -S: Orphan (since 2014-03) -F: board/amcc/bluestone/ -F: include/configs/bluestone.h -F: configs/bluestone_defconfig diff --git a/board/amcc/bluestone/Makefile b/board/amcc/bluestone/Makefile deleted file mode 100644 index 07320ce425..0000000000 --- a/board/amcc/bluestone/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (c) 2010, Applied Micro Circuits Corporation -# Author: Tirumala R Marri -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := bluestone.o -extra-y += init.o diff --git a/board/amcc/bluestone/bluestone.c b/board/amcc/bluestone/bluestone.c deleted file mode 100644 index 6520f75c68..0000000000 --- a/board/amcc/bluestone/bluestone.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Bluestone board support - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tirumala R Marri - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int board_early_init_f(void) -{ - /* - * Setup the interrupt controller polarities, triggers, etc. - */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(UIC2ER, 0x00000000); /* disable all */ - mtdcr(UIC2CR, 0x00000000); /* all non-critical */ - mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - mtdcr(UIC3ER, 0x00000000); /* disable all */ - mtdcr(UIC3CR, 0x00000000); /* all non-critical */ - mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - - /* - * Configure PFC (Pin Function Control) registers - * UART0: 2 pins - */ - mtsdr(SDR0_PFC1, 0x0000000); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: Bluestone Evaluation Board"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -int misc_init_r(void) -{ - u32 sdr0_srst1 = 0; - - /* Setup PLB4-AHB bridge based on the system address map */ - mtdcr(AHB_TOP, 0x8000004B); - mtdcr(AHB_BOT, 0x8000004B); - - /* - * The AHB Bridge core is held in reset after power-on or reset - * so enable it now - */ - mfsdr(SDR0_SRST1, sdr0_srst1); - sdr0_srst1 &= ~SDR0_SRST1_AHB; - mtsdr(SDR0_SRST1, sdr0_srst1); - - return 0; -} diff --git a/board/amcc/bluestone/config.mk b/board/amcc/bluestone/config.mk deleted file mode 100644 index a947e82af7..0000000000 --- a/board/amcc/bluestone/config.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (c) 2010, Applied Micro Circuits Corporation -# Author: Tirumala R Marri -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Applied Micro APM821XX Evaluation board. -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/bluestone/init.S b/board/amcc/bluestone/init.S deleted file mode 100644 index cf22ca6340..0000000000 --- a/board/amcc/bluestone/init.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tirumala R Marri - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* TLB 0 */ - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, - 4, AC_RWX | SA_G) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, - 0, AC_RWX | SA_G) - - /* TLB-entry for OCM */ - tlbentry(CONFIG_SYS_OCM_BASE, SZ_64K, 0x00040000, 4, - AC_RWX | SA_I) - - /* TLB-entry for Local Configuration registers => peripherals */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, - CONFIG_SYS_PERIPHERAL_BASE, 4, AC_RWX | SA_IG) - tlbtab_end diff --git a/configs/bluestone_defconfig b/configs/bluestone_defconfig deleted file mode 100644 index 8f83a4308e..0000000000 --- a/configs/bluestone_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_BLUESTONE=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 48e94ab0aa..036bc838ab 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +bluestone powerpc ppc4xx - - Tirumala Marri CRAYL1 powerpc ppc4xx - - David Updegraff KAREF powerpc ppc4xx - - Travis Sawyer METROBOX powerpc ppc4xx - - Travis Sawyer diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h deleted file mode 100644 index 8bd71c6a15..0000000000 --- a/include/configs/bluestone.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * bluestone.h - configuration for Bluestone (APM821XX) - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tirumala R Marri - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_APM821XX 1 /* APM821XX series */ -#define CONFIG_HOSTNAME bluestone - -#define CONFIG_440 1 - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 -#endif - -/* - * Include common defines/options for all AMCC eval boards - */ -#include "amcc-common.h" -#define CONFIG_SYS_CLK_FREQ 50000000 - -#define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -/* EBC stuff */ -/* later mapped to this addr */ -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_SIZE (4 << 20) /* 1MB usable */ - -/* EBC Boot Space: 0xFF000000 */ -#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 32k */ -#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ -#define CONFIG_SYS_AHB_BASE 0xE2000000 /* internal AHB peripherals*/ - -#define CONFIG_SYS_SRAM_SIZE (256 << 10) -/* - * Initial RAM & stack pointer (placed in OCM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Environment - */ -/* - * Define here the location of the environment variables (FLASH). - */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/* - * FLASH related - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 80 -/* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -/* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -/* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/* SDRAM */ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x51} /* SPD i2c spd addresses */ -#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ -#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ -#define CONFIG_DDR_ECC 1 /* with ECC support */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* Data sheet */ - -/* I2C bootstrap EEPROM */ -#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 -#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 -#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 - -/* - * Ethernet - */ -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_NONE_RGMII -#define CONFIG_HAS_ETH0 -/* PHY address, See schematics */ -#define CONFIG_PHY_ADDR 0x1f -/* reset phy upon startup */ -#define CONFIG_PHY_RESET 1 -/* Include GbE speed/duplex detection */ -#define CONFIG_PHY_GIGE 1 -#define CONFIG_PHY_DYNAMIC_ANEG 1 - -/* - * External Bus Controller (EBC) Setup - **/ -#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_LOCK | \ - EBC_CFG_PTD_ENABLE | \ - EBC_CFG_RTC_2048PERCLK | \ - EBC_CFG_ATC_HI | \ - EBC_CFG_DTC_HI | \ - EBC_CFG_CTC_HI | \ - EBC_CFG_OEO_PREVIOUS) -/* NOR Flash */ -#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(64) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(1) | \ - EBC_BXAP_OEN_ENCODE(2) | \ - EBC_BXAP_WBN_ENCODE(2) | \ - EBC_BXAP_WBF_ENCODE(2) | \ - EBC_BXAP_TH_ENCODE(7) | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED) -/* Peripheral Bank Configuration Register - EBC_BxCR */ -#define CONFIG_SYS_EBC_PB0CR \ - (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ - EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_8BIT) - - -#endif /* __CONFIG_H */