From: Andreas Bießmann Date: Mon, 11 May 2015 11:07:24 +0000 (+0200) Subject: avr32: delete non generic board favr-32-ezkit X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9eb45aabe078;p=u-boot.git avr32: delete non generic board favr-32-ezkit Signed-off-by: Andreas Bießmann --- diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index c69654c993..34881edd45 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -26,9 +26,6 @@ config TARGET_ATSTK1004 config TARGET_ATSTK1006 bool "Support atstk1006" -config TARGET_FAVR_32_EZKIT - bool "Support favr-32-ezkit" - config TARGET_GRASSHOPPER bool "Support grasshopper" @@ -43,7 +40,6 @@ endchoice source "board/atmel/atngw100/Kconfig" source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" -source "board/earthlcd/favr-32-ezkit/Kconfig" source "board/in-circuit/grasshopper/Kconfig" source "board/mimc/mimc200/Kconfig" source "board/miromico/hammerhead/Kconfig" diff --git a/board/earthlcd/favr-32-ezkit/Kconfig b/board/earthlcd/favr-32-ezkit/Kconfig deleted file mode 100644 index 50e29ec241..0000000000 --- a/board/earthlcd/favr-32-ezkit/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_FAVR_32_EZKIT - -config SYS_BOARD - default "favr-32-ezkit" - -config SYS_VENDOR - default "earthlcd" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "favr-32-ezkit" - -endif diff --git a/board/earthlcd/favr-32-ezkit/MAINTAINERS b/board/earthlcd/favr-32-ezkit/MAINTAINERS deleted file mode 100644 index 89ba862149..0000000000 --- a/board/earthlcd/favr-32-ezkit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -FAVR-32-EZKIT BOARD -#M: Hans-Christian Egtvedt -S: Orphan (since 2014-06) -F: board/earthlcd/favr-32-ezkit/ -F: include/configs/favr-32-ezkit.h -F: configs/favr-32-ezkit_defconfig diff --git a/board/earthlcd/favr-32-ezkit/Makefile b/board/earthlcd/favr-32-ezkit/Makefile deleted file mode 100644 index f712ab9c7a..0000000000 --- a/board/earthlcd/favr-32-ezkit/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2008 Atmel Corporation -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := favr-32-ezkit.o flash.o diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c deleted file mode 100644 index f9ac330c33..0000000000 --- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2008 Atmel Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include - -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { - { - .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT, - .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT, - .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT) - | MMU_VMR_CACHE_NONE, - }, { - .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT, - .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT, - .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT) - | MMU_VMR_CACHE_WRBACK, - }, -}; - -static const struct sdram_config sdram_config = { - /* MT48LC4M32B2P-6 (16 MB) */ - .data_bits = SDRAM_DATA_32BIT, - .row_bits = 12, - .col_bits = 8, - .bank_bits = 2, - .cas = 3, - .twr = 2, - .trc = 7, - .trp = 2, - .trcd = 2, - .tras = 5, - .txsr = 5, - /* 15.6 us */ - .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, -}; - -int board_early_init_f(void) -{ - /* Enable SDRAM in the EBI mux */ - hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); - - portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH); - - sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config); - - portmux_enable_usart3(PORTMUX_DRIVE_MIN); -#if defined(CONFIG_MACB) - portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); -#endif -#if defined(CONFIG_MMC) - portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); -#endif - - return 0; -} - -int board_early_init_r(void) -{ - gd->bd->bi_phy_id[0] = 0x01; - return 0; -} - -#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -int board_eth_init(bd_t *bi) -{ - return macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, - bi->bi_phy_id[0]); -} -#endif diff --git a/board/earthlcd/favr-32-ezkit/flash.c b/board/earthlcd/favr-32-ezkit/flash.c deleted file mode 100644 index e45c6f4d01..0000000000 --- a/board/earthlcd/favr-32-ezkit/flash.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (C) 2008 Atmel Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include - -#ifdef CONFIG_FAVR32_EZKIT_EXT_FLASH -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -flash_info_t flash_info[1]; - -static void flash_identify(uint16_t *flash, flash_info_t *info) -{ - unsigned long flags; - - flags = disable_interrupts(); - - dcache_flush_unlocked(); - - writew(0xaa, flash + 0x555); - writew(0x55, flash + 0xaaa); - writew(0x90, flash + 0x555); - info->flash_id = readl(flash); - writew(0xff, flash); - - readw(flash); - - if (flags) - enable_interrupts(); -} - -unsigned long flash_init(void) -{ - unsigned long addr; - unsigned int i; - - flash_info[0].size = CONFIG_SYS_FLASH_SIZE; - flash_info[0].sector_count = 135; - - flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]); - - for (i = 0, addr = 0; i < 8; i++, addr += 0x2000) - flash_info[0].start[i] = addr; - for (; i < flash_info[0].sector_count; i++, addr += 0x10000) - flash_info[0].start[i] = addr; - - return CONFIG_SYS_FLASH_SIZE; -} - -void flash_print_info(flash_info_t *info) -{ - printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n", - info->flash_id >> 16, info->flash_id & 0xffff); - printf("Size: %ld MB in %d sectors\n", - info->size >> 10, info->sector_count); -} - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - unsigned long flags; - unsigned long start_time; - uint16_t *fb, *sb; - unsigned int i; - int ret; - uint16_t status; - - if ((s_first < 0) || (s_first > s_last) - || (s_last >= info->sector_count)) { - puts("Error: first and/or last sector out of range\n"); - return ERR_INVAL; - } - - for (i = s_first; i < s_last; i++) - if (info->protect[i]) { - printf("Error: sector %d is protected\n", i); - return ERR_PROTECTED; - } - - fb = (uint16_t *)uncached(info->start[0]); - - dcache_flush_unlocked(); - - for (i = s_first; (i <= s_last) && !ctrlc(); i++) { - printf("Erasing sector %3d...", i); - - sb = (uint16_t *)uncached(info->start[i]); - - flags = disable_interrupts(); - - start_time = get_timer(0); - - /* Unlock sector */ - writew(0xaa, fb + 0x555); - writew(0x70, sb); - - /* Erase sector */ - writew(0xaa, fb + 0x555); - writew(0x55, fb + 0xaaa); - writew(0x80, fb + 0x555); - writew(0xaa, fb + 0x555); - writew(0x55, fb + 0xaaa); - writew(0x30, sb); - - /* Wait for completion */ - ret = ERR_OK; - do { - /* TODO: Timeout */ - status = readw(sb); - } while ((status != 0xffff) && !(status & 0x28)); - - writew(0xf0, fb); - - /* - * Make sure the command actually makes it to the bus - * before we re-enable interrupts. - */ - readw(fb); - - if (flags) - enable_interrupts(); - - if (status != 0xffff) { - printf("Flash erase error at address 0x%p: 0x%02x\n", - sb, status); - ret = ERR_PROG_ERROR; - break; - } - } - - if (ctrlc()) - printf("User interrupt!\n"); - - return ERR_OK; -} - -int write_buff(flash_info_t *info, uchar *src, - ulong addr, ulong count) -{ - unsigned long flags; - uint16_t *base, *p, *s, *end; - uint16_t word, status, status1; - int ret = ERR_OK; - - if (addr < info->start[0] - || (addr + count) > (info->start[0] + info->size) - || (addr + count) < addr) { - puts("Error: invalid address range\n"); - return ERR_INVAL; - } - - if (addr & 1 || count & 1 || (unsigned int)src & 1) { - puts("Error: misaligned source, destination or count\n"); - return ERR_ALIGN; - } - - base = (uint16_t *)uncached(info->start[0]); - end = (uint16_t *)uncached(addr + count); - - flags = disable_interrupts(); - - dcache_flush_unlocked(); - sync_write_buffer(); - - for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src; - p < end && !ctrlc(); p++, s++) { - word = *s; - - writew(0xaa, base + 0x555); - writew(0x55, base + 0xaaa); - writew(0xa0, base + 0x555); - writew(word, p); - - sync_write_buffer(); - - /* Wait for completion */ - status1 = readw(p); - do { - /* TODO: Timeout */ - status = status1; - status1 = readw(p); - } while (((status ^ status1) & 0x40) /* toggled */ - && !(status1 & 0x28)); /* error bits */ - - /* - * We'll need to check once again for toggle bit - * because the toggle bit may stop toggling as I/O5 - * changes to "1" (ref at49bv642.pdf p9) - */ - status1 = readw(p); - status = readw(p); - if ((status ^ status1) & 0x40) { - printf("Flash write error at address 0x%p: " - "0x%02x != 0x%02x\n", - p, status,word); - ret = ERR_PROG_ERROR; - writew(0xf0, base); - readw(base); - break; - } - - writew(0xf0, base); - readw(base); - } - - if (flags) - enable_interrupts(); - - return ret; -} - -#endif /* CONFIG_FAVR32_EZKIT_EXT_FLASH */ diff --git a/configs/favr-32-ezkit_defconfig b/configs/favr-32-ezkit_defconfig deleted file mode 100644 index 33305309b5..0000000000 --- a/configs/favr-32-ezkit_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_AVR32=y -CONFIG_CMD_NET=y -CONFIG_TARGET_FAVR_32_EZKIT=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h deleted file mode 100644 index 04f4124de8..0000000000 --- a/include/configs/favr-32-ezkit.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (C) 2008 Atmel Corporation - * - * Configuration settings for the Favr-32 EarthLCD LCD kit. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#define CONFIG_AT32AP -#define CONFIG_AT32AP7000 -#define CONFIG_FAVR32_EZKIT - -#define CONFIG_FAVR32_EZKIT_EXT_FLASH - -/* - * Set up the PLL to run at 140 MHz, the CPU to run at the PLL - * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the - * PLL frequency. - * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz - */ -#define CONFIG_PLL -#define CONFIG_SYS_POWER_MANAGER -#define CONFIG_SYS_OSC0_HZ 20000000 -#define CONFIG_SYS_PLL0_DIV 1 -#define CONFIG_SYS_PLL0_MUL 7 -#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 -/* - * Set the CPU running at: - * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz - */ -#define CONFIG_SYS_CLKDIV_CPU 0 -/* - * Set the HSB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz - */ -#define CONFIG_SYS_CLKDIV_HSB 1 -/* - * Set the PBA running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz - */ -#define CONFIG_SYS_CLKDIV_PBA 2 -/* - * Set the PBB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz - */ -#define CONFIG_SYS_CLKDIV_PBB 1 - -/* Reserve VM regions for SDRAM and NOR flash */ -#define CONFIG_SYS_NR_VM_REGIONS 2 - -/* - * The PLLOPT register controls the PLL like this: - * icp = PLLOPT<2> - * ivco = PLLOPT<1:0> - * - * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). - */ -#define CONFIG_SYS_PLL0_OPT 0x04 - -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID 3 - -/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_STACKSIZE (2048) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS \ - "root=/dev/mtdblock1 rootfstype=jffs fbmem=1800k" - -#define CONFIG_BOOTCOMMAND \ - "fsload; bootm $(fileaddr)" - -#define CONFIG_BOOTDELAY 1 - -/* - * After booting the board for the first time, new ethernet addresses - * should be generated and assigned to the environment variables - * "ethaddr" and "eth1addr". This is normally done during production. - */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG - -#define CONFIG_ATMEL_USART -#define CONFIG_MACB -#define CONFIG_PORTMUX_PIO -#define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC -#define CONFIG_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_DCACHE_LINESZ 32 -#define CONFIG_SYS_ICACHE_LINESZ 32 - -#define CONFIG_NR_DRAM_BANKS 1 - -/* External flash on Favr-32 */ -#if 0 -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#endif - -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 65536 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) - -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* Allow 4MB for the kernel run-time image */ -#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) -#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) - -/* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP - -#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000) -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } - -#endif /* __CONFIG_H */