From: Christian Hewitt Date: Mon, 20 Mar 2023 11:45:39 +0000 (+0000) Subject: doc: boards: amlogic: update documentation for pre-generated-fip's X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9e5559458e5c469823cf2e53599e896a71ccf862;p=u-boot.git doc: boards: amlogic: update documentation for pre-generated-fip's Improve documentation. Signed-off-by: Christian Hewitt Link: https://lore.kernel.org/r/20230320114609.930145-4-christianshewitt@gmail.com Signed-off-by: Neil Armstrong --- diff --git a/doc/board/amlogic/pre-generated-fip.rst b/doc/board/amlogic/pre-generated-fip.rst index c63ea616b8..6a43d776d4 100644 --- a/doc/board/amlogic/pre-generated-fip.rst +++ b/doc/board/amlogic/pre-generated-fip.rst @@ -1,24 +1,57 @@ .. SPDX-License-Identifier: GPL-2.0+ -Pre-Generated FIP file set -========================== +Pre-Generated FIP File Repo +=========================== -The Amlogic ARMv8 based SoCs uses a vendor variant of the Trusted Firmware-A -boot architecture. +Pre-built Flattened Image Package (FIP) sources and Amlogic signing binaries for many +commercially available boards and some Android STB devices are collected for use with +distro build-systems here: https://github.com/LibreELEC/amlogic-boot-fip -You can find documentation on the Trusted Firmware-A architecture on: https://www.trustedfirmware.org/projects/tf-a/ +Using the pre-built FIP sources to sign U-Boot is simple, e.g. for LePotato: -The Trusted Firmware-A uses the following boot elements (simplified): +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir + +Then write U-Boot to SD or eMMC with: + +.. code-block:: bash + + $ DEV=/dev/boot_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440 + +Files Included +-------------- + +Amlogic ARMv8 SoCs use a vendor modified variant of the ARM Trusted Firmware-A boot +architecture. See documentation here: https://www.trustedfirmware.org/projects/tf-a/ + +Trusted Firmware-A uses the following boot elements (simplified): + +- BL1: First boot step implemented in ROM on Amlogic SoCs + +- BL2: Second boot step used to initialize the SoC main clocks & DDR interface. BL21 + and ACS board-specific binaries must be "inserted" into the BL2 binary before signing + and packaging in order to be flashed on the platform + +- BL30: Amlogic Secure Co-Processor (SCP) firmware used to handle all system management + operations (DVFS, suspend/resume, ..) + +- BL301: Amlogic Secure Co-Processor (SCP) board-specific firmware "plug-in" to handle + custom DVFS & suspend-resume parameters -- BL1: First boot step, implemented in ROM on Amlogic SoCs -- BL2: Second boot step, used to initialize the SoC main clocks & DDR interface. The BL21 and ACS board-specific binaries are "inserted" in the BL32 binary before signing/packaging in order to be flashed on the platform. -- BL30: Amlogic Secure Co-Processor (SCP) firmware used to handle all the system management operations (DVFS, suspend/resume, ...) -- BL301: Amlogic Secure Co-Processor (SCP) board-specific firmware "plug-in" to handle custom DVFS & suspend-resume parameters - BL31: Initializes the interrupt controller and the system management interface (PSCI) -- BL32 (Optional): Is the Trusted Environment Execution (TEE) Operating System to run secure Trusted Apps, e.g. OP-TEE + +- BL32 (Optional): Is the Trusted Environment Execution (TEE) Operating System used to + run secure Trusted Apps, e.g. OP-TEE + - BL33: Is the last non-secure step, usually U-Boot which loads Linux -Amlogic provides in binary form: +Amlogic sources provide the following binaries: - bl2.bin - bl30.bin @@ -26,10 +59,50 @@ Amlogic provides in binary form: - bl31.img - bl32.bin -And for lastest SoCs, Amlogic also provides the DDR drivers used by the BL2 binary. +For G12A/B and SM1 Amlogic also provides DDR drivers used by the BL2 binary: + +- ddr4_1d.fw +- ddr4_2d.fw +- ddr3_1d.fw +- piei.fw +- lpddr4_1d.fw +- lpddr4_2d.fw +- diag_lpddr4.fw +- aml_ddr.fw + +The following files are generated from the Amlogic U-Boot fork: + +- acs.bin: Contains the PLL & DDR parameters for the board +- bl301.bin: Contains the DVFS & suspend-resume handling code for the board +- bl33.bin: U-boot binary image + +The acs.bin and bl301.bin files use U-Boot GPL-2.0+ headers and U-Boot build system and +are thus considered to be issued from GPL-2.0+ source code. + +Amlogic alo provides pre-compiled x86_64 and Python2 binaries: -The licence of these files wasn't clear until recently, the currently Amlogic distribution licence -is the following: +- aml_encrypt_gxb +- aml_encrypt_gxl +- aml_encrypt_g12a +- aml_encrypt_g12b +- acs_tool.pyc + +The repo replaces the pre-compiled acs_tool.pyc with a Python3 acs_tool.py that can be +used with modern build hosts. + +The repo also provides the following files used with GXBB boards: + +- bl1.bin.hardkernel +- aml_chksum + +The repo also supports the open-source 'gxlimg' signing tool that can be used to sign +U-Boot binaries for GXL/GXM/G12A/G12B/SM1 boards: https://github.com/repk/gxlimg + +Licensing +--------- + +The licence of Amlogic provided binaries was not historically clear but has now been +clarified. The current Amlogic distribution licence is below: .. code-block:: C @@ -56,38 +129,3 @@ is the following: // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -The following files are generated from the Amlogic U-Boot fork: - -- acs.bin: contains the PLL & DDR parameters for the board -- bl301.bin: contains the DVFS & suspend-resume handling code for the board -- bl33.bin: U-boot binary image - -The acs.bin & bl301.bin uses the U-Boot GPL-2.0+ headers & build systems, thus those -are considered issued from GPL-2.0+ source code. - -The tools used to sign & package those binary files are delivered in binary format -for Intel x86-64 and Python 2.x only. - -A collection of pre-built with the corresponding Amlogic binaries for the common -commercially available boards were collected in the https://github.com/LibreELEC/amlogic-boot-fip -repository. - -Using this collection for a commercially available board is very easy. - -Here considering the Libre Computer AML-S905X-CC, which codename is `lepotato`: - -.. code-block:: bash - - $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 - $ cd amlogic-boot-fip - $ mkdir my-output-dir - $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir - -and then write the image to SD with: - -.. code-block:: bash - - $ DEV=/dev/your_sd_device - $ dd if=my-output-dir/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - $ dd if=my-output-dir/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444