From: Shawn Lin Date: Fri, 15 Jan 2021 10:01:22 +0000 (+0800) Subject: pci: Add Rockchip dwc based PCIe controller driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9ddc0787bd660214366e386ce689dd78299ac9d0;p=u-boot.git pci: Add Rockchip dwc based PCIe controller driver Add Rockchip dwc based PCIe controller driver for rk356x platform. Driver support Gen3 by operating as a Root complex. Signed-off-by: Shawn Lin Reviewed-by: Simon Glass Reviewed-by: Kever Yang --- diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 65498bce1d..b1de38f766 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -281,6 +281,15 @@ config PCIE_ROCKCHIP Say Y here if you want to enable PCIe controller support on Rockchip SoCs. +config PCIE_DW_ROCKCHIP + bool "Rockchip DesignWare based PCIe controller" + depends on ARCH_ROCKCHIP + select DM_PCI + select PHY_ROCKCHIP_SNPS_PCIE3 + help + Say Y here if you want to enable DW PCIe controller support on + Rockchip SoCs. + config PCI_BRCMSTB bool "Broadcom STB PCIe controller" depends on DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 8b4d49a590..5ed94bc95c 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -48,5 +48,6 @@ obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o +obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o diff --git a/drivers/pci/pcie_dw_rockchip.c b/drivers/pci/pcie_dw_rockchip.c new file mode 100644 index 0000000000..15270627b0 --- /dev/null +++ b/drivers/pci/pcie_dw_rockchip.c @@ -0,0 +1,877 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Rockchip DesignWare based PCIe host controller driver + * + * Copyright (c) 2021 Rockchip, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/** + * struct rk_pcie - RK DW PCIe controller state + * + * @vpcie3v3: The 3.3v power supply for slot + * @dbi_base: The base address of dwc core regs + * @apb_base: The base address of vendor regs + * @cfg_base: The base address of config header space + * @cfg_size: The size of the configuration space which is needed + * as it gets written into the PCIE_ATU_LIMIT register + * @first_busno: This driver supports multiple PCIe controllers. + * first_busno stores the bus number of the PCIe root-port + * number which may vary depending on the PCIe setup + * (PEX switches etc). + * @rst_gpio: The #PERST signal for slot + * @io: The IO space for EP's BAR + * @mem: The memory space for EP's BAR + */ +struct rk_pcie { + struct udevice *dev; + struct udevice *vpcie3v3; + void *dbi_base; + void *apb_base; + void *cfg_base; + fdt_size_t cfg_size; + struct phy phy; + struct clk_bulk clks; + int first_busno; + struct reset_ctl_bulk rsts; + struct gpio_desc rst_gpio; + struct pci_region io; + struct pci_region mem; +}; + +/* Parameters for the waiting for iATU enabled routine */ +#define PCIE_CLIENT_GENERAL_DEBUG 0x104 +#define PCIE_CLIENT_HOT_RESET_CTRL 0x180 +#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4) +#define PCIE_CLIENT_LTSSM_STATUS 0x300 +#define SMLH_LINKUP BIT(16) +#define RDLH_LINKUP BIT(17) +#define PCIE_CLIENT_DBG_FIFO_MODE_CON 0x310 +#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0 0x320 +#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1 0x324 +#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0 0x328 +#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1 0x32c +#define PCIE_CLIENT_DBG_FIFO_STATUS 0x350 +#define PCIE_CLIENT_DBG_TRANSITION_DATA 0xffff0000 +#define PCIE_CLIENT_DBF_EN 0xffff0003 + +/* PCI DBICS registers */ +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +#define PCIE_LINK_CAPABILITY 0x7c +#define PCIE_LINK_CTL_2 0xa0 +#define TARGET_LINK_SPEED_MASK 0xf +#define LINK_SPEED_GEN_1 0x1 +#define LINK_SPEED_GEN_2 0x2 +#define LINK_SPEED_GEN_3 0x3 + +#define PCIE_MISC_CONTROL_1_OFF 0x8bc +#define PCIE_DBI_RO_WR_EN BIT(0) + +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80c +#define PORT_LOGIC_SPEED_CHANGE BIT(17) + +/* + * iATU Unroll-specific register definitions + * From 4.80 core version the address translation will be made by unroll. + * The registers are offset from atu_base + */ +#define PCIE_ATU_UNR_REGION_CTRL1 0x00 +#define PCIE_ATU_UNR_REGION_CTRL2 0x04 +#define PCIE_ATU_UNR_LOWER_BASE 0x08 +#define PCIE_ATU_UNR_UPPER_BASE 0x0c +#define PCIE_ATU_UNR_LIMIT 0x10 +#define PCIE_ATU_UNR_LOWER_TARGET 0x14 +#define PCIE_ATU_UNR_UPPER_TARGET 0x18 + +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) + +/* Register address builder */ +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \ + ((0x3 << 20) | ((region) << 9)) + +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU_US 10000 + +/* Parameters for the waiting for #perst signal */ +#define PERST_WAIT_MS 1000 + +static int rk_pcie_read(void __iomem *addr, int size, u32 *val) +{ + if ((uintptr_t)addr & (size - 1)) { + *val = 0; + return PCIBIOS_UNSUPPORTED; + } + + if (size == 4) { + *val = readl(addr); + } else if (size == 2) { + *val = readw(addr); + } else if (size == 1) { + *val = readb(addr); + } else { + *val = 0; + return -ENODEV; + } + + return 0; +} + +static int rk_pcie_write(void __iomem *addr, int size, u32 val) +{ + if ((uintptr_t)addr & (size - 1)) + return PCIBIOS_UNSUPPORTED; + + if (size == 4) + writel(val, addr); + else if (size == 2) + writew(val, addr); + else if (size == 1) + writeb(val, addr); + else + return -ENODEV; + + return 0; +} + +static u32 __rk_pcie_read_apb(struct rk_pcie *rk_pcie, void __iomem *base, + u32 reg, size_t size) +{ + int ret; + u32 val; + + ret = rk_pcie_read(base + reg, size, &val); + if (ret) + dev_err(rk_pcie->dev, "Read APB address failed\n"); + + return val; +} + +static void __rk_pcie_write_apb(struct rk_pcie *rk_pcie, void __iomem *base, + u32 reg, size_t size, u32 val) +{ + int ret; + + ret = rk_pcie_write(base + reg, size, val); + if (ret) + dev_err(rk_pcie->dev, "Write APB address failed\n"); +} + +/** + * rk_pcie_readl_apb() - Read vendor regs + * + * @rk_pcie: Pointer to the PCI controller state + * @reg: Offset of regs + */ +static inline u32 rk_pcie_readl_apb(struct rk_pcie *rk_pcie, u32 reg) +{ + return __rk_pcie_read_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4); +} + +/** + * rk_pcie_writel_apb() - Write vendor regs + * + * @rk_pcie: Pointer to the PCI controller state + * @reg: Offset of regs + * @val: Value to be writen + */ +static inline void rk_pcie_writel_apb(struct rk_pcie *rk_pcie, u32 reg, + u32 val) +{ + __rk_pcie_write_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4, val); +} + +static int rk_pcie_get_link_speed(struct rk_pcie *rk_pcie) +{ + return (readl(rk_pcie->dbi_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF; +} + +static int rk_pcie_get_link_width(struct rk_pcie *rk_pcie) +{ + return (readl(rk_pcie->dbi_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF; +} + +static void rk_pcie_writel_ob_unroll(struct rk_pcie *rk_pcie, u32 index, + u32 reg, u32 val) +{ + u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); + void __iomem *base = rk_pcie->dbi_base; + + writel(val, base + offset + reg); +} + +static u32 rk_pcie_readl_ob_unroll(struct rk_pcie *rk_pcie, u32 index, u32 reg) +{ + u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); + void __iomem *base = rk_pcie->dbi_base; + + return readl(base + offset + reg); +} + +static inline void rk_pcie_dbi_write_enable(struct rk_pcie *rk_pcie, bool en) +{ + u32 val; + + val = readl(rk_pcie->dbi_base + PCIE_MISC_CONTROL_1_OFF); + + if (en) + val |= PCIE_DBI_RO_WR_EN; + else + val &= ~PCIE_DBI_RO_WR_EN; + writel(val, rk_pcie->dbi_base + PCIE_MISC_CONTROL_1_OFF); +} + +/** + * rockchip_pcie_setup_host() - Setup the PCIe controller for RC opertaion + * + * @rk_pcie: Pointer to the PCI controller state + * + * Configure the host BARs of the PCIe controller root port so that + * PCI(e) devices may access the system memory. + */ +static void rk_pcie_setup_host(struct rk_pcie *rk_pcie) +{ + u32 val; + + rk_pcie_dbi_write_enable(rk_pcie, true); + + /* setup RC BARs */ + writel(PCI_BASE_ADDRESS_MEM_TYPE_64, + rk_pcie->dbi_base + PCI_BASE_ADDRESS_0); + writel(0x0, rk_pcie->dbi_base + PCI_BASE_ADDRESS_1); + + /* setup interrupt pins */ + clrsetbits_le32(rk_pcie->dbi_base + PCI_INTERRUPT_LINE, + 0xff00, 0x100); + + /* setup bus numbers */ + clrsetbits_le32(rk_pcie->dbi_base + PCI_PRIMARY_BUS, + 0xffffff, 0x00ff0100); + + /* setup command register */ + clrsetbits_le32(rk_pcie->dbi_base + PCI_PRIMARY_BUS, + 0xffff, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + + /* program correct class for RC */ + writew(PCI_CLASS_BRIDGE_PCI, rk_pcie->dbi_base + PCI_CLASS_DEVICE); + /* Better disable write permission right after the update */ + + setbits_le32(rk_pcie->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, + PORT_LOGIC_SPEED_CHANGE) + + rk_pcie_dbi_write_enable(rk_pcie, false); +} + +/** + * rk_pcie_configure() - Configure link capabilities and speed + * + * @rk_pcie: Pointer to the PCI controller state + * @cap_speed: The capabilities and speed to configure + * + * Configure the link capabilities and speed in the PCIe root complex. + */ +static void rk_pcie_configure(struct rk_pcie *pci, u32 cap_speed) +{ + u32 val; + + rk_pcie_dbi_write_enable(pci, true); + + clrsetbits_le32(pci->dbi_base + PCIE_LINK_CAPABILITY, + TARGET_LINK_SPEED_MASK, cap_speed); + + clrsetbits_le32(pci->dbi_base + PCIE_LINK_CTL_2, + TARGET_LINK_SPEED_MASK, cap_speed); + + rk_pcie_dbi_write_enable(pci, false); +} + +/** + * rk_pcie_dw_prog_outbound_atu_unroll() - Configure ATU for outbound accesses + * + * @rk_pcie: Pointer to the PCI controller state + * @index: ATU region index + * @type: ATU accsess type + * @cpu_addr: the physical address for the translation entry + * @pci_addr: the pcie bus address for the translation entry + * @size: the size of the translation entry + * + * Return: 0 is successful and -1 is failure + */ +static int rk_pcie_prog_outbound_atu_unroll(struct rk_pcie *pci, int index, + int type, u64 cpu_addr, + u64 pci_addr, u32 size) +{ + u32 retries, val; + + dev_dbg(pci->dev, "ATU programmed with: index: %d, type: %d, cpu addr: %8llx, pci addr: %8llx, size: %8x\n", + index, type, cpu_addr, pci_addr, size); + + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE, + lower_32_bits(cpu_addr)); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE, + upper_32_bits(cpu_addr)); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT, + lower_32_bits(cpu_addr + size - 1)); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET, + lower_32_bits(pci_addr)); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, + upper_32_bits(pci_addr)); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, + type); + rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2, + PCIE_ATU_ENABLE); + + /* + * Make sure ATU enable takes effect before any subsequent config + * and I/O accesses. + */ + for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { + val = rk_pcie_readl_ob_unroll(pci, index, + PCIE_ATU_UNR_REGION_CTRL2); + if (val & PCIE_ATU_ENABLE) + return 0; + + udelay(LINK_WAIT_IATU_US); + } + dev_err(pci->dev, "outbound iATU is not being enabled\n"); + + return -1; +} + +/** + * rk_pcie_dw_addr_valid() - Check for valid bus address + * + * @d: The PCI device to access + * @first_busno: Bus number of the PCIe controller root complex + * + * Return 1 (true) if the PCI device can be accessed by this controller. + * + * Return: 1 on valid, 0 on invalid + */ +static int rk_pcie_addr_valid(pci_dev_t d, int first_busno) +{ + if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0)) + return 0; + if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0)) + return 0; + + return 1; +} + +/** + * set_cfg_address() - Configure the PCIe controller config space access + * + * @rk_pcie: Pointer to the PCI controller state + * @d: PCI device to access + * @where: Offset in the configuration space + * + * Configures the PCIe controller to access the configuration space of + * a specific PCIe device and returns the address to use for this + * access. + * + * Return: Address that can be used to access the configation space + * of the requested device / offset + */ +static uintptr_t set_cfg_address(struct rk_pcie *pcie, + pci_dev_t d, uint where) +{ + int rel_bus = PCI_BUS(d) - pcie->first_busno; + uintptr_t va_address; + u32 atu_type; + int ret; + + /* Use dbi_base for own configuration read and write */ + if (!rel_bus) { + va_address = (uintptr_t)pcie->dbi_base; + goto out; + } + + if (rel_bus == 1) + /* + * For local bus whose primary bus number is root bridge, + * change TLP Type field to 4. + */ + atu_type = PCIE_ATU_TYPE_CFG0; + else + /* Otherwise, change TLP Type field to 5. */ + atu_type = PCIE_ATU_TYPE_CFG1; + + /* + * Not accessing root port configuration space? + * Region #0 is used for Outbound CFG space access. + * Direction = Outbound + * Region Index = 0 + */ + d = PCI_MASK_BUS(d); + d = PCI_ADD_BUS(rel_bus, d); + ret = rk_pcie_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1, + atu_type, (u64)pcie->cfg_base, + d << 8, pcie->cfg_size); + if (ret) + return (uintptr_t)ret; + + va_address = (uintptr_t)pcie->cfg_base; + +out: + va_address += where & ~0x3; + + return va_address; +} + +/** + * rockchip_pcie_rd_conf() - Read from configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. + * + * Return: 0 on success + */ +static int rockchip_pcie_rd_conf(const struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + struct rk_pcie *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong value; + + debug("PCIE CFG read: bdf=%2x:%2x:%2x\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + + if (!rk_pcie_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + *valuep = pci_get_ff(size); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + value = readl(va_address); + + debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + *valuep = pci_conv_32_to_size(value, offset, size); + + return rk_pcie_prog_outbound_atu_unroll(pcie, + PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_IO, + pcie->io.phys_start, + pcie->io.bus_start, + pcie->io.size); +} + +/** + * rockchip_pcie_wr_conf() - Write to configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. + * + * Return: 0 on success + */ +static int rockchip_pcie_wr_conf(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + struct rk_pcie *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong old; + + debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d)\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + + if (!rk_pcie_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + old = readl(va_address); + value = pci_conv_size_to_32(old, value, offset, size); + writel(value, va_address); + + return rk_pcie_prog_outbound_atu_unroll(pcie, + PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_IO, + pcie->io.phys_start, + pcie->io.bus_start, + pcie->io.size); + +} + +static void rk_pcie_enable_debug(struct rk_pcie *rk_pcie) +{ + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0, + PCIE_CLIENT_DBG_TRANSITION_DATA); + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1, + PCIE_CLIENT_DBG_TRANSITION_DATA); + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0, + PCIE_CLIENT_DBG_TRANSITION_DATA); + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1, + PCIE_CLIENT_DBG_TRANSITION_DATA); + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_MODE_CON, + PCIE_CLIENT_DBF_EN); +} + +static void rk_pcie_debug_dump(struct rk_pcie *rk_pcie) +{ + u32 loop; + + debug("ltssm = 0x%x\n", + rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_LTSSM_STATUS)); + for (loop = 0; loop < 64; loop++) + debug("fifo_status = 0x%x\n", + rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_STATUS)); +} + +static inline void rk_pcie_link_status_clear(struct rk_pcie *rk_pcie) +{ + rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_GENERAL_DEBUG, 0x0); +} + +static inline void rk_pcie_disable_ltssm(struct rk_pcie *rk_pcie) +{ + rk_pcie_writel_apb(rk_pcie, 0x0, 0xc0008); +} + +static inline void rk_pcie_enable_ltssm(struct rk_pcie *rk_pcie) +{ + rk_pcie_writel_apb(rk_pcie, 0x0, 0xc000c); +} + +static int is_link_up(struct rk_pcie *priv) +{ + u32 val; + + val = rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS); + if ((val & (RDLH_LINKUP | SMLH_LINKUP)) == 0x30000 && + (val & GENMASK(5, 0)) == 0x11) + return 1; + + return 0; +} + +/** + * rk_pcie_link_up() - Wait for the link to come up + * + * @rk_pcie: Pointer to the PCI controller state + * @cap_speed: Desired link speed + * + * Return: 1 (true) for active line and negetive (false) for no link (timeout) + */ +static int rk_pcie_link_up(struct rk_pcie *priv, u32 cap_speed) +{ + int retries; + + if (is_link_up(priv)) { + printf("PCI Link already up before configuration!\n"); + return 1; + } + + /* DW pre link configurations */ + rk_pcie_configure(priv, cap_speed); + + /* Rest the device */ + if (dm_gpio_is_valid(&priv->rst_gpio)) { + dm_gpio_set_value(&priv->rst_gpio, 0); + /* + * Minimal is 100ms from spec but we see + * some wired devices need much more, such as 600ms. + * Add a enough delay to cover all cases. + */ + msleep(PERST_WAIT_MS); + dm_gpio_set_value(&priv->rst_gpio, 1); + } + + rk_pcie_disable_ltssm(priv); + rk_pcie_link_status_clear(priv); + rk_pcie_enable_debug(priv); + + /* Enable LTSSM */ + rk_pcie_enable_ltssm(priv); + + for (retries = 0; retries < 5; retries++) { + if (is_link_up(priv)) { + dev_info(priv->dev, "PCIe Link up, LTSSM is 0x%x\n", + rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS)); + rk_pcie_debug_dump(priv); + return 0; + } + + dev_info(priv->dev, "PCIe Linking... LTSSM is 0x%x\n", + rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS)); + rk_pcie_debug_dump(priv); + msleep(1000); + } + + dev_err(priv->dev, "PCIe-%d Link Fail\n", dev_seq(priv->dev)); + /* Link maybe in Gen switch recovery but we need to wait more 1s */ + msleep(1000); + return -EIO; +} + +static int rockchip_pcie_init_port(struct udevice *dev) +{ + int ret; + u32 val; + struct rk_pcie *priv = dev_get_priv(dev); + + /* Set power and maybe external ref clk input */ + if (priv->vpcie3v3) { + ret = regulator_set_value(priv->vpcie3v3, 3300000); + if (ret) { + dev_err(priv->dev, "failed to enable vpcie3v3 (ret=%d)\n", + ret); + return ret; + } + } + + msleep(1000); + + ret = generic_phy_init(&priv->phy); + if (ret) { + dev_err(dev, "failed to init phy (ret=%d)\n", ret); + return ret; + } + + ret = generic_phy_power_on(&priv->phy); + if (ret) { + dev_err(dev, "failed to power on phy (ret=%d)\n", ret); + goto err_exit_phy; + } + + ret = reset_deassert_bulk(&priv->rsts); + if (ret) { + dev_err(dev, "failed to deassert resets (ret=%d)\n", ret); + goto err_power_off_phy; + } + + ret = clk_enable_bulk(&priv->clks); + if (ret) { + dev_err(dev, "failed to enable clks (ret=%d)\n", ret); + goto err_deassert_bulk; + } + + /* LTSSM EN ctrl mode */ + val = rk_pcie_readl_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL); + val |= PCIE_LTSSM_ENABLE_ENHANCE | (PCIE_LTSSM_ENABLE_ENHANCE << 16); + rk_pcie_writel_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL, val); + + /* Set RC mode */ + rk_pcie_writel_apb(priv, 0x0, 0xf00040); + rk_pcie_setup_host(priv); + + ret = rk_pcie_link_up(priv, LINK_SPEED_GEN_3); + if (ret < 0) + goto err_link_up; + + return 0; +err_link_up: + clk_disable_bulk(&priv->clks); +err_deassert_bulk: + reset_assert_bulk(&priv->rsts); +err_power_off_phy: + generic_phy_power_off(&priv->phy); +err_exit_phy: + generic_phy_exit(&priv->phy); + + return ret; +} + +static int rockchip_pcie_parse_dt(struct udevice *dev) +{ + struct rk_pcie *priv = dev_get_priv(dev); + int ret; + + priv->dbi_base = (void *)dev_read_addr_index(dev, 0); + if (!priv->dbi_base) + return -ENODEV; + + dev_dbg(dev, "DBI address is 0x%p\n", priv->dbi_base); + + priv->apb_base = (void *)dev_read_addr_index(dev, 1); + if (!priv->apb_base) + return -ENODEV; + + dev_dbg(dev, "APB address is 0x%p\n", priv->apb_base); + + ret = gpio_request_by_name(dev, "reset-gpios", 0, + &priv->rst_gpio, GPIOD_IS_OUT); + if (ret) { + dev_err(dev, "failed to find reset-gpios property\n"); + return ret; + } + + ret = reset_get_bulk(dev, &priv->rsts); + if (ret) { + dev_err(dev, "Can't get reset: %d\n", ret); + return ret; + } + + ret = clk_get_bulk(dev, &priv->clks); + if (ret) { + dev_err(dev, "Can't get clock: %d\n", ret); + return ret; + } + + ret = device_get_supply_regulator(dev, "vpcie3v3-supply", + &priv->vpcie3v3); + if (ret && ret != -ENOENT) { + dev_err(dev, "failed to get vpcie3v3 supply (ret=%d)\n", ret); + return ret; + } + + ret = generic_phy_get_by_index(dev, 0, &priv->phy); + if (ret) { + dev_err(dev, "failed to get pcie phy (ret=%d)\n", ret); + return ret; + } + + return 0; +} + +/** + * rockchip_pcie_probe() - Probe the PCIe bus for active link + * + * @dev: A pointer to the device being operated on + * + * Probe for an active link on the PCIe bus and configure the controller + * to enable this port. + * + * Return: 0 on success, else -ENODEV + */ +static int rockchip_pcie_probe(struct udevice *dev) +{ + struct rk_pcie *priv = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + int reti = 0; + + priv->first_busno = dev_seq(dev); + priv->dev = dev; + + ret = rockchip_pcie_parse_dt(dev); + if (ret) + return ret; + + ret = rockchip_pcie_init_port(dev); + if (ret) + return ret; + + dev_info(dev, "PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", + dev_seq(dev), rk_pcie_get_link_speed(priv), + rk_pcie_get_link_width(priv), + hose->first_busno); + + for (ret = 0; ret < hose->region_count; ret++) { + if (hose->regions[ret].flags == PCI_REGION_IO) { + priv->io.phys_start = hose->regions[ret].phys_start; /* IO base */ + priv->io.bus_start = hose->regions[ret].bus_start; /* IO_bus_addr */ + priv->io.size = hose->regions[ret].size; /* IO size */ + } else if (hose->regions[ret].flags == PCI_REGION_MEM) { + priv->mem.phys_start = hose->regions[ret].phys_start; /* MEM base */ + priv->mem.bus_start = hose->regions[ret].bus_start; /* MEM_bus_addr */ + priv->mem.size = hose->regions[ret].size; /* MEM size */ + } else if (hose->regions[ret].flags == PCI_REGION_SYS_MEMORY) { + priv->cfg_base = (void *)(priv->io.phys_start - priv->io.size); + priv->cfg_size = priv->io.size; + } else { + dev_err(dev, "invalid flags type!\n"); + } + } + + dev_dbg(dev, "Config space: [0x%p - 0x%p, size 0x%llx]\n", + priv->cfg_base, priv->cfg_base + priv->cfg_size, + priv->cfg_size); + + dev_dbg(dev, "IO space: [0x%llx - 0x%llx, size 0x%lx]\n", + priv->io.phys_start, priv->io.phys_start + priv->io.size, + priv->io.size); + + dev_dbg(dev, "IO bus: [0x%lx - 0x%lx, size 0x%lx]\n", + priv->io.bus_start, priv->io.bus_start + priv->io.size, + priv->io.size); + + dev_dbg(dev, "MEM space: [0x%llx - 0x%llx, size 0x%lx]\n", + priv->mem.phys_start, priv->mem.phys_start + priv->mem.size, + priv->mem.size); + + dev_dbg(dev, "MEM bus: [0x%lx - 0x%lx, size 0x%lx]\n", + priv->mem.bus_start, priv->mem.bus_start + priv->mem.size, + priv->mem.size); + + return rk_pcie_prog_outbound_atu_unroll(priv, + PCIE_ATU_REGION_INDEX0, + PCIE_ATU_TYPE_MEM, + priv->mem.phys_start, + priv->mem.bus_start, + priv->mem.size); +} + +static const struct dm_pci_ops rockchip_pcie_ops = { + .read_config = rockchip_pcie_rd_conf, + .write_config = rockchip_pcie_wr_conf, +}; + +static const struct udevice_id rockchip_pcie_ids[] = { + { .compatible = "rockchip,rk3568-pcie" }, + { } +}; + +U_BOOT_DRIVER(rockchip_dw_pcie) = { + .name = "pcie_dw_rockchip", + .id = UCLASS_PCI, + .of_match = rockchip_pcie_ids, + .ops = &rockchip_pcie_ops, + .probe = rockchip_pcie_probe, + .priv_auto = sizeof(struct rk_pcie), +}; diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index b794cdaf6a..e477a6cd9e 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -23,6 +23,9 @@ config PHY_ROCKCHIP_SNPS_PCIE3 depends on PHY && ARCH_ROCKCHIP help Support for Rockchip PCIe3 PHY with Synopsys IP block. + It could support PCIe Gen3 single root complex, and could + also be able splited into multiple combinations of lanes. + config PHY_ROCKCHIP_TYPEC bool "Rockchip TYPEC PHY Driver"