From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 17 Jan 2015 15:39:20 +0000 (+0100)
Subject: sunxi: axp209: Disable interrupts when intializing the axp209
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9dcf68fac888211758f43b2adf9b930d519a26da;p=u-boot.git

sunxi: axp209: Disable interrupts when intializing the axp209

We do not use the axp209 interrupt, and at least in my mini-x (which does not
have a power button) the pwr-button pin and the irq pin are soldered together,
so if the axp209 keeps it irq asserted too long it will see a 10s pwr-button
press and hard power off the board, disabling the irqs fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c
index 3b1a6a73ae..4565398b0b 100644
--- a/drivers/power/axp209.c
+++ b/drivers/power/axp209.c
@@ -16,6 +16,11 @@ enum axp209_reg {
 	AXP209_DCDC3_VOLTAGE = 0x27,
 	AXP209_LDO24_VOLTAGE = 0x28,
 	AXP209_LDO3_VOLTAGE = 0x29,
+	AXP209_IRQ_ENABLE1 = 0x40,
+	AXP209_IRQ_ENABLE2 = 0x41,
+	AXP209_IRQ_ENABLE3 = 0x42,
+	AXP209_IRQ_ENABLE4 = 0x43,
+	AXP209_IRQ_ENABLE5 = 0x44,
 	AXP209_IRQ_STATUS5 = 0x4c,
 	AXP209_SHUTDOWN = 0x32,
 	AXP209_GPIO0_CTRL = 0x90,
@@ -143,7 +148,7 @@ int axp209_set_ldo4(int mvolt)
 int axp209_init(void)
 {
 	u8 ver;
-	int rc;
+	int i, rc;
 
 	rc = axp209_read(AXP209_CHIP_VERSION, &ver);
 	if (rc)
@@ -155,6 +160,13 @@ int axp209_init(void)
 	if (ver != 0x1)
 		return -1;
 
+	/* Mask all interrupts */
+	for (i = AXP209_IRQ_ENABLE1; i <= AXP209_IRQ_ENABLE5; i++) {
+		rc = axp209_write(i, 0);
+		if (rc)
+			return rc;
+	}
+
 	return 0;
 }