From: Dirk Behme Date: Sun, 31 May 2009 10:44:42 +0000 (+0200) Subject: OMAP3: Fix CKE1 MUX setting to allow self-refresh X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9d4fc99dbdbfda1260aad478e83fca7cdf0e1a32;p=u-boot.git OMAP3: Fix CKE1 MUX setting to allow self-refresh The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX setting is needed for the second CS clock signal to allow the 2 RAM parts to be put in self-refresh correctly. This also works on rev B Beagle boards with 128M of RAM. From: Steve Sakoman From: Jean Pihet Signed-off-by: Jean Pihet Signed-off-by: Steve Sakoman Signed-off-by: Dirk Behme --- diff --git a/board/omap3/beagle/beagle.h b/board/omap3/beagle/beagle.h index 324ec66fbe..3a0f907d77 100644 --- a/board/omap3/beagle/beagle.h +++ b/board/omap3/beagle/beagle.h @@ -371,7 +371,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ #define MUX_BEAGLE_C() \ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h index b595f6ac3e..0b59120a30 100644 --- a/board/omap3/overo/overo.h +++ b/board/omap3/overo/overo.h @@ -376,6 +376,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ #endif