From: Dennis Gilmore Date: Wed, 9 Dec 2020 03:07:38 +0000 (-0600) Subject: ARM: mvebu: ClearFog make sure that SATA and UART images are buildable X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9c690314dba9a2860a97f56e6e57f63c8513ddba;p=u-boot.git ARM: mvebu: ClearFog make sure that SATA and UART images are buildable SATA and UART ClearFog imaages are not buildable as ENV_SECT_SIZE is not defined set values for both possible targets Signed-off-by: Dennis Gilmore --- diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index e8c3f53d84..cf95258090 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -50,9 +50,9 @@ config ENV_OFFSET config ENV_SECT_SIZE hex "Environment Sector-Size" # Use SPI flash erase block size of 4 KiB - default 0x1000 if MVEBU_SPL_BOOT_DEVICE_SPI + default 0x1000 if MVEBU_SPL_BOOT_DEVICE_SPI || MVEBU_SPL_BOOT_DEVICE_SATA # Use optimistic 64 KiB erase block, will vary between actual media - default 0x10000 if MVEBU_SPL_BOOT_DEVICE_MMC + default 0x10000 if MVEBU_SPL_BOOT_DEVICE_MMC || MVEBU_SPL_BOOT_DEVICE_UART config SYS_SPI_U_BOOT_OFFS hex "address of u-boot payload in SPI flash"