From: Tim Harvey <tharvey@gateworks.com>
Date: Fri, 9 Sep 2022 21:42:38 +0000 (-0700)
Subject: arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsi
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9bf0cbf396beaf3257698f672207ab7849134618;p=u-boot.git

arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsi

The upstream Linux DSA drivers do not require phy-handle nodes in
the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and
the mdio nodes to the u-boot.dtsi file so that future dts file
syncrhonization between Linux and U-Boot don't break networking.

Fixes: 24a7a3c1c042 ("imx8mm: synchronise device tree with linux")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
index 11c773bb70..dc99e7b9ac 100644
--- a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
@@ -129,6 +129,57 @@
 	phy-reset-post-delay = <1>;
 };
 
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lan1: port@0 {
+			phy-handle = <&sw_phy0>;
+		};
+
+		lan2: port@1 {
+			phy-handle = <&sw_phy1>;
+		};
+
+		lan3: port@2 {
+			phy-handle = <&sw_phy2>;
+		};
+
+		lan4: port@3 {
+			phy-handle = <&sw_phy3>;
+		};
+	};
+
+	mdios {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0>;
+			compatible = "microchip,ksz-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sw_phy0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			sw_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			sw_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			sw_phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+		};
+	};
+};
+
 &pinctrl_fec1 {
 	u-boot,dm-spl;
 };