From: Peng Fan Date: Tue, 31 Jan 2023 08:42:33 +0000 (+0800) Subject: imx8ulp_evk: disable overflow of port0 for LPAV X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9b7e39b6c1ff40a8336328708727394ae8a107e5;p=u-boot.git imx8ulp_evk: disable overflow of port0 for LPAV Bit0: Port 0 behavior when bandwidth maximized. Set to 1 to allow overflow With overflow set, we see some issue that A35 may not able to get enough bandwidth and A35 will report hrtimer takes too much time, workqueue lockup. With overflow cleared, the issues are gone. Reviewed-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing.c b/board/freescale/imx8ulp_evk/lpddr4_timing.c index e9edb87128..6d2805315b 100644 --- a/board/freescale/imx8ulp_evk/lpddr4_timing.c +++ b/board/freescale/imx8ulp_evk/lpddr4_timing.c @@ -396,7 +396,7 @@ struct dram_cfg_param ddr_ctl_cfg[] = { { 0x2e0608e0, 0x30f0f }, /* 568 */ { 0x2e0608e4, 0xffffffff }, /* 569 */ { 0x2e0608e8, 0x32070f0f }, /* 570 */ - { 0x2e0608ec, 0x1320001 }, /* 571 */ + { 0x2e0608ec, 0x1320000 }, /* 571 */ { 0x2e0608f0, 0x13200 }, /* 572 */ { 0x2e0608f4, 0x132 }, /* 573 */ { 0x2e0608fc, 0x1b1b0000 }, /* 575 */ diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c index 9728a25441..7945760146 100644 --- a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c +++ b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c @@ -395,7 +395,7 @@ struct dram_cfg_param ddr_ctl_cfg[] = { { 0x2e0608e0, 0x30f0f }, /* 568 */ { 0x2e0608e4, 0xffffffff }, /* 569 */ { 0x2e0608e8, 0x32070f0f }, /* 570 */ - { 0x2e0608ec, 0x1320001 }, /* 571 */ + { 0x2e0608ec, 0x1320000 }, /* 571 */ { 0x2e0608f0, 0x13200 }, /* 572 */ { 0x2e0608f4, 0x132 }, /* 573 */ { 0x2e0608fc, 0x1d1b0000 }, /* 575 */