From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 23 May 2016 08:01:19 +0000 (+0530)
Subject: ARM: OMAP4+: Fix DPLL programming sequence
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9b77b19178446393fce2e74554815c17454f8da8;p=u-boot.git

ARM: OMAP4+: Fix DPLL programming sequence

All the output clock parameters of a DPLL needs to be programmed before
locking the DPLL. But it is being configured after locking the DPLL which
could potentially bypass DPLL. So fixing this sequence.

Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index ef2ac98217..2de9935765 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -236,6 +236,8 @@ static void do_setup_dpll(u32 const base, const struct dpll_params *params,
 			/* Dpll locked with ideal values for nominal opps. */
 			debug("\n %s Dpll already locked with ideal"
 						"nominal opp values", dpll);
+
+			bypass_dpll(base);
 			goto setup_post_dividers;
 		}
 	}
@@ -251,13 +253,13 @@ static void do_setup_dpll(u32 const base, const struct dpll_params *params,
 
 	writel(temp, &dpll_regs->cm_clksel_dpll);
 
+setup_post_dividers:
+	setup_post_dividers(base, params);
+
 	/* Lock */
 	if (lock)
 		do_lock_dpll(base);
 
-setup_post_dividers:
-	setup_post_dividers(base, params);
-
 	/* Wait till the DPLL locks */
 	if (lock)
 		wait_for_lock(base);