From: Marek Vasut Date: Sun, 9 Jun 2019 16:46:43 +0000 (+0200) Subject: ARM: imx: m53menlo: Enable DM GPIO X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9b352ae1ae9fb53ce94a05cc06d300227f4eacc4;p=u-boot.git ARM: imx: m53menlo: Enable DM GPIO Enable DM GPIO support on iMX53 M53Menlo and fix up board code where applicable. Enable MALLOC_F to let the GPIO controllers bind early on. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Stefano Babic --- diff --git a/board/menlo/m53menlo/m53menlo.c b/board/menlo/m53menlo/m53menlo.c index 6bdd6d5b23..a46041868c 100644 --- a/board/menlo/m53menlo/m53menlo.c +++ b/board/menlo/m53menlo/m53menlo.c @@ -88,6 +88,7 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4, PAD_CTL_PKE | PAD_CTL_DSE_HIGH)); + gpio_request(IMX_GPIO_NR(1, 4), "USB_OTG_PWRON"); gpio_direction_output(IMX_GPIO_NR(1, 4), 0); /* USB OTG Over Current */ @@ -97,6 +98,7 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2, PAD_CTL_PKE | PAD_CTL_DSE_HIGH)); + gpio_request(IMX_GPIO_NR(1, 2), "USB_HOST_PWRON"); gpio_direction_output(IMX_GPIO_NR(1, 2), 0); /* USB Host Over Current */ @@ -215,6 +217,8 @@ static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk) static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev) { + gpio_request(IMX_GPIO_NR(6, 0), "LCD"); + /* For ETM0430G0DH6 model, this must be enabled before the clock. */ gpio_direction_output(IMX_GPIO_NR(6, 0), 1); @@ -227,6 +231,8 @@ static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev) static void enable_lvds_etm0700g0dh6(struct display_info_t const *dev) { + gpio_request(IMX_GPIO_NR(6, 0), "LCD"); + /* * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 . @@ -424,6 +430,8 @@ static void m53_set_clock(void) const u32 dramclk = 400; u32 cpuclk; + gpio_request(IMX_GPIO_NR(4, 0), "CPUCLK"); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0, PAD_CTL_DSE_HIGH | PAD_CTL_PKE)); gpio_direction_input(IMX_GPIO_NR(4, 0)); diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index ef57fbea91..3b527b9fdc 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x71000000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_TARGET_M53MENLO=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 @@ -29,6 +30,7 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y @@ -51,9 +53,11 @@ CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx53-m53menlo" CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041 +CONFIG_DM_GPIO=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y CONFIG_NAND_MXC=y