From: Andre Schwarz Date: Tue, 29 Apr 2008 17:18:32 +0000 (+0200) Subject: TSEC: add config options for VSC8601 RGMII PHY X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9acde129cc3f9c1b3bc11a821480dd446774d618;p=u-boot.git TSEC: add config options for VSC8601 RGMII PHY The Vitesse VSC8601 RGMII PHY has internal delay for both Rx and Tx clock lines. They are configured using 2 bits in extended register 0x17. Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. Signed-off-by: Andre Schwarz Acked-by: Andy Fleming Acked-by: Ben Warren -- drivers/net/tsec.c | 6 ++++++ drivers/net/tsec.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-) --- diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 9d22aa38be..f86bfd7eea 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1277,6 +1277,12 @@ struct phy_info phy_info_VSC8601 = { {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, #ifdef CFG_VSC8601_SKEWFIX {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL}, +if defined(CFG_VSC8601_SKEW_TX) && defined(CFG_VSC8601_SKEW_RX) + {MIIM_EXT_PAGE_ACCESS,1,NULL}, +#define VSC8101_SKEW (CFG_VSC8601_SKEW_TX<<14)|(CFG_VSC8601_SKEW_RX<<12) + {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL}, + {MIIM_EXT_PAGE_ACCESS,0,NULL}, +#endif #endif {miim_end,} }, diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h index cfa7d1aad7..597ea1d3c7 100644 --- a/drivers/net/tsec.h +++ b/drivers/net/tsec.h @@ -112,6 +112,8 @@ #define MIIM_GBIT_CONTROL 0x9 #define MIIM_GBIT_CONTROL_INIT 0xe00 +#define MIIM_EXT_PAGE_ACCESS 0x1f + /* Broadcom BCM54xx -- taken from linux sungem_phy */ #define MIIM_BCM54xx_AUXSTATUS 0x19 #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 @@ -161,8 +163,9 @@ /* Entry for Vitesse VSC8601 regs starts here (Not complete) */ /* Vitesse VSC8601 Extended PHY Control Register 1 */ -#define MIIM_VSC8601_EPHY_CON 0x17 +#define MIIM_VSC8601_EPHY_CON 0x17 #define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 +#define MIIM_VSC8601_SKEW_CTRL 0x1c /* 88E1011 PHY Status Register */ #define MIIM_88E1011_PHY_STATUS 0x11 @@ -177,9 +180,9 @@ #define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 /* 88E1111 PHY LED Control Register */ -#define MIIM_88E1111_PHY_LED_CONTROL 24 -#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 -#define MIIM_88E1111_PHY_LED_COMBINE 0x411C +#define MIIM_88E1111_PHY_LED_CONTROL 24 +#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 +#define MIIM_88E1111_PHY_LED_COMBINE 0x411C /* 88E1145 Extended PHY Specific Control Register */ #define MIIM_88E1145_PHY_EXT_CR 20