From: Simon Glass Date: Mon, 27 Feb 2012 10:52:47 +0000 (+0000) Subject: usb: Add support for txfifo threshold X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9ab4ce223c1d991e92e15c9aa0f522d61072155d;p=u-boot.git usb: Add support for txfifo threshold CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. Signed-off-by: Simon Glass Acked-by: Remy Bohmer Signed-off-by: Tom Warren --- diff --git a/README b/README index 5452813449..d4799e222f 100644 --- a/README +++ b/README @@ -1125,6 +1125,9 @@ The following options need to be configured: May be defined to allow interrupt polling instead of using asynchronous interrupts + CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the + txfilltuning field in the EHCI controller on reset. + - USB Device: Define the below if you wish to use the USB console. Once firmware is rebuilt from a serial console issue the diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index ef5afc22b0..b6422d7d7a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -255,6 +255,13 @@ static int ehci_reset(void) #endif ehci_writel(reg_ptr, tmp); } + +#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH + cmd = ehci_readl(&hcor->or_txfilltuning); + cmd &= ~TXFIFO_THRESH(0x3f); + cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); + ehci_writel(&hcor->or_txfilltuning, cmd); +#endif out: return ret; } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 3d0ad0c852..cc00ce428b 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -80,7 +80,11 @@ struct ehci_hcor { uint32_t or_ctrldssegment; uint32_t or_periodiclistbase; uint32_t or_asynclistaddr; - uint32_t _reserved_[9]; + uint32_t _reserved_0_; + uint32_t or_burstsize; + uint32_t or_txfilltuning; +#define TXFIFO_THRESH(p) ((p & 0x3f) << 16) + uint32_t _reserved_1_[6]; uint32_t or_configflag; #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];