From: Madan Srinivas Date: Fri, 20 May 2016 00:10:47 +0000 (-0500) Subject: ti: AM43xx: Use CONFIG options from SOC Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9aac7d0ec96923a39f8d234f82b82bec5c13f183;p=u-boot.git ti: AM43xx: Use CONFIG options from SOC Kconfig Updates configs/am43xx_evm.h to use CONFIG options from SOC specific Kconfig file for various calculations. On AM43x devices, the address of SPL entry point depends on the device type, i.e. whether it is secure or non-secure. Further, for non-secure devices, the SPL entry point is different between USB HOST boot mode, other "memory" boot modes (MMC, NAND) and "peripheral" boot modes (UART, USB) To add to the complexity, on secure devices, in addition to the above differences, the SPL entry point can change because of the space occupied by other components (other than u-boot or spl) that go into a secure boot image. To prevent the user from having to modify source files every time any component of the secure image changes, the value of CONFIG_SPL_TEXT_BASE has been set using a Kconfig option that is supplied in the am43xx_*_defconfig files Using the CONFIG options also enables us to do away with some compile time flags that were used to specify CONFIG_SPL_TEXT_BASE for different boot modes. On QSPI devices, the same problem described above occurs w.r.t. the address of the u-boot entry point in flash, when booting secure devices. To handle this, CONFIG_SYS_TEXT_BASE is also setup via a Kconfig option and the defconfig files. Signed-off-by: Madan Srinivas Signed-off-by: Daniel Allred Reviewed-by: Lokesh Vutla Tested-by: Andreas Dannenberg Reviewed-by: Tom Rini --- diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 4bc75e7117..5f90e2bef1 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y +CONFIG_ISW_ENTRY_ADDR=0x30000000 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 32a07edccf..1f73114650 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y +CONFIG_ISW_ENTRY_ADDR=0x40300350 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index a35541bca9..8a48a9aa37 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -37,17 +37,10 @@ #define CONFIG_POWER_TPS62362 /* SPL defines. */ -#ifdef CONFIG_SPL_USB_HOST_SUPPORT -/* - * For USB host boot, ROM uses DMA for copying MLO from USB storage - * and ARM internal ram is not accessible for DMA, so SPL text base - * should be in OCMC ram - */ -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#else -#define CONFIG_SPL_TEXT_BASE 0x402F4000 -#endif -#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ +#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR +#define CONFIG_SPL_MAX_SIZE (NON_SECURE_SRAM_END - \ + CONFIG_PUB_ROM_DATA_SIZE - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT @@ -190,7 +183,9 @@ #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x30000000 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR +#endif #undef CONFIG_ENV_IS_IN_FAT #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT