From: Clément Léger Date: Mon, 16 Aug 2021 12:25:40 +0000 (+0200) Subject: board: sama5d27_som1_ek: Modify load addresses X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9a211d5776c6d05acf305a54d74836f801c85dd6;p=u-boot.git board: sama5d27_som1_ek: Modify load addresses When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved. This modification allows to have a system which always work even when OP-TEE is present. Signed-off-by: Clément Léger --- diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 89d8486ff8..1c30e44392 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -14,24 +14,20 @@ #undef CONFIG_SYS_AT91_MAIN_CLOCK #define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x8000000 - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_INIT_SP_ADDR 0x218000 #else #define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x21000000 " \ +#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 " \ CONFIG_DEFAULT_DEVICE_TREE ".dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" + "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \ + "bootz 0x23000000 - 0x22000000" #endif /* SPL */