From: Bin Meng Date: Wed, 19 Jul 2017 13:50:05 +0000 (+0800) Subject: usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=99c225568890df8fd224a4944d98599a5b2b721d;p=u-boot.git usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS EHC reports supported maximum number of ports in the HCSPARAMS register, so it's unnecessary to use a hardcoded config option CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Tested-by: Stefan Roese --- diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 40ac3a602c..3243c1d1cf 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -148,9 +148,12 @@ static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) { - if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { + int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); + + if (port < 0 || port >= max_ports) { /* Printing the message would cause a scan failure! */ - debug("The request port(%u) is not configured\n", port); + debug("The request port(%u) exceeds maximum port number\n", + port); return NULL; } @@ -205,6 +208,7 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl) { int i, ret = 0; uint32_t cmd, reg; + int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); if (!ctrl || !ctrl->hcor) return -EINVAL; @@ -219,7 +223,7 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl) 100 * 1000); if (!ret) { - for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) { + for (i = 0; i < max_ports; i++) { reg = ehci_readl(&ctrl->hcor->or_portsc[i]); reg |= EHCI_PS_SUSP; ehci_writel(&ctrl->hcor->or_portsc[i], reg); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2ab830df51..7c39becd24 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -11,9 +11,8 @@ #include -#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 -#endif +/* Section 2.2.3 - N_PORTS */ +#define MAX_HC_PORTS 15 /* * Register Space. @@ -62,7 +61,7 @@ struct ehci_hcor { uint32_t _reserved_1_[6]; uint32_t or_configflag; #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ - uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS]; + uint32_t or_portsc[MAX_HC_PORTS]; #define PORTSC_PSPD(x) (((x) >> 26) & 0x3) #define PORTSC_PSPD_FS 0x0 #define PORTSC_PSPD_LS 0x1