From: Simon Glass Date: Thu, 13 Jan 2022 02:26:22 +0000 (-0700) Subject: bloblist: Refactor Kconfig to support alloc or fixed X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=99047f5d7f9cb013f7040edd7d20a70cc30646b5;p=u-boot.git bloblist: Refactor Kconfig to support alloc or fixed At present we do support allocating the bloblist but the Kconfig is a bit strange, since we still have to specify an address in that case. Partly this is because it is a pain to have CONFIG options that disappears when its dependency is enabled. It means that we must have #ifdefs in the code, either in the C code or header file. Make use of IF_ENABLED_INT() and its friend to solve that problem, so we can separate out the location of bloblist into a choice. Put the address and size into variables so we can log the result. Add the options for SPL as well, so we can use CONFIG_IS_ENABLED(). Signed-off-by: Simon Glass --- diff --git a/common/Kconfig b/common/Kconfig index ca136b1ac7..82cd864baf 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -738,15 +738,17 @@ config TPL_BLOBLIST if BLOBLIST -config BLOBLIST_SIZE - hex "Size of bloblist" - depends on BLOBLIST - default 0x400 +choice + prompt "Bloblist location" help - Sets the size of the bloblist in bytes. This must include all - overhead (alignment, bloblist header, record header). The bloblist - is set up in the first part of U-Boot to run (TPL, SPL or U-Boot - proper), and this sane bloblist is used for subsequent phases. + Select the location of the bloblist, via various means. + +config BLOBLIST_FIXED + bool "Place bloblist at a fixed address in memory" + help + Select this to used a fixed memory address for the bloblist. If the + bloblist exists at this address from a previous phase, it used as is. + If not it is created at this address in U-Boot. config BLOBLIST_ALLOC bool "Allocate bloblist" @@ -755,18 +757,31 @@ config BLOBLIST_ALLOC specify a fixed address on systems where this is unknown or can change at runtime. +endchoice + config BLOBLIST_ADDR hex "Address of bloblist" default 0xc000 if SANDBOX + depends on BLOBLIST_FIXED help Sets the address of the bloblist, set up by the first part of U-Boot which runs. Subsequent U-Boot phases typically use the same address. This is not used if BLOBLIST_ALLOC is selected. +config BLOBLIST_SIZE + hex "Size of bloblist" + default 0x400 + help + Sets the size of the bloblist in bytes. This must include all + overhead (alignment, bloblist header, record header). The bloblist + is set up in the first part of U-Boot to run (TPL, SPL or U-Boot + proper), and this sane bloblist is used for subsequent phases. + config BLOBLIST_SIZE_RELOC hex "Size of bloblist after relocation" - default BLOBLIST_SIZE + default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC + default 0 if BLOBLIST_PASSAGE help Sets the size of the bloblist in bytes after relocation. Since U-Boot has a lot more memory available then, it is possible to use a larger @@ -775,6 +790,64 @@ config BLOBLIST_SIZE_RELOC endif # BLOBLIST +if SPL_BLOBLIST + +choice + prompt "Bloblist location in SPL" + help + Select the location of the bloblist, via various means. Typically + you should use the same value for SPL as for U-Boot, since they need + to look in the same place. But if BLOBLIST_ALLOC is used, then a + fresh bloblist will be created each time, since there is no shared + address (between phases) for the bloblist. + +config SPL_BLOBLIST_FIXED + bool "Place bloblist at a fixed address in memory" + help + Select this to used a fixed memory address for the bloblist. If the + bloblist exists at this address from a previous phase, it used as is. + If not it is created at this address in SPL. + +config SPL_BLOBLIST_ALLOC + bool "Allocate bloblist" + help + Allocate the bloblist using malloc(). This avoids the need to + specify a fixed address on systems where this is unknown or can + change at runtime. + +endchoice + +endif # SPL_BLOBLIST + +if TPL_BLOBLIST + +choice + prompt "Bloblist location in TPL" + help + Select the location of the bloblist, via various means. Typically + you should use the same value for SPL as for U-Boot, since they need + to look in the same place. But if BLOBLIST_ALLOC is used, then a + fresh bloblist will be created each time, since there is no shared + address (between phases) for the bloblist. + +config TPL_BLOBLIST_FIXED + bool "Place bloblist at a fixed address in memory" + help + Select this to used a fixed memory address for the bloblist. If the + bloblist exists at this address from a previous phase, it used as is. + If not it is created at this address in TPL. + +config TPL_BLOBLIST_ALLOC + bool "Allocate bloblist" + help + Allocate the bloblist using malloc(). This avoids the need to + specify a fixed address on systems where this is unknown or can + change at runtime. + +endchoice + +endif # TPL_BLOBLIST + endmenu source "common/spl/Kconfig" diff --git a/common/bloblist.c b/common/bloblist.c index b5fea12b69..0049bb9a39 100644 --- a/common/bloblist.c +++ b/common/bloblist.c @@ -4,6 +4,7 @@ * Written by Simon Glass */ +#define LOG_DEBUG #define LOG_CATEGORY LOGC_BLOBLIST #include @@ -360,6 +361,8 @@ int bloblist_finish(void) struct bloblist_hdr *hdr = gd->bloblist; hdr->chksum = bloblist_calc_chksum(hdr); + log_debug("Finished bloblist size %lx at %lx\n", (ulong)hdr->size, + (ulong)map_to_sysmem(hdr)); return 0; } @@ -415,8 +418,9 @@ void bloblist_reloc(void *to, uint to_size, void *from, uint from_size) int bloblist_init(void) { - bool expected; int ret = -ENOENT; + ulong addr, size; + bool expected; /** * Wed expect to find an existing bloblist in the first phase of U-Boot @@ -425,27 +429,32 @@ int bloblist_init(void) expected = !u_boot_first_phase(); if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST)) expected = false; - if (expected) - ret = bloblist_check(CONFIG_BLOBLIST_ADDR, - CONFIG_BLOBLIST_SIZE); + addr = bloblist_addr(); + size = CONFIG_BLOBLIST_SIZE; + if (expected) { + ret = bloblist_check(addr, size); + if (ret) { + log_warning("Expected bloblist at %lx not found (err=%d)\n", + addr, ret); + } else { + /* Get the real size, if it is not what we expected */ + size = gd->bloblist->size; + } + } if (ret) { - ulong addr; - - log(LOGC_BLOBLIST, expected ? LOGL_WARNING : LOGL_DEBUG, - "Existing bloblist not found: creating new bloblist\n"); - if (IS_ENABLED(CONFIG_BLOBLIST_ALLOC)) { - void *ptr = memalign(BLOBLIST_ALIGN, - CONFIG_BLOBLIST_SIZE); + if (CONFIG_IS_ENABLED(BLOBLIST_ALLOC)) { + void *ptr = memalign(BLOBLIST_ALIGN, size); if (!ptr) return log_msg_ret("alloc", -ENOMEM); addr = map_to_sysmem(ptr); - } else { - addr = CONFIG_BLOBLIST_ADDR; } - ret = bloblist_new(addr, CONFIG_BLOBLIST_SIZE, 0); + log_debug("Creating new bloblist size %lx at %lx\n", size, + addr); + ret = bloblist_new(addr, size, 0); } else { - log_debug("Found existing bloblist\n"); + log_debug("Found existing bloblist size %lx at %lx\n", size, + addr); } return ret; diff --git a/include/bloblist.h b/include/bloblist.h index 5de4545160..13f2b3f100 100644 --- a/include/bloblist.h +++ b/include/bloblist.h @@ -147,6 +147,16 @@ struct bloblist_rec { u32 spare; }; +/* access CONFIG_BLOBLIST_ADDR, dealing with it possibly not being defined */ +static inline ulong bloblist_addr(void) +{ +#ifdef CONFIG_BLOBLIST_FIXED + return CONFIG_BLOBLIST_ADDR; +#else + return 0; +#endif +} + /** * bloblist_check_magic() - return a bloblist if the magic matches *