From: Bin Meng Date: Tue, 12 Jan 2016 06:41:18 +0000 (-0800) Subject: net: tsec: fsl_mdio: Fix several cosmetic issues X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9872b736f957585c6494e727634fe6ed837bcd86;p=u-boot.git net: tsec: fsl_mdio: Fix several cosmetic issues Clean up the tsec and fsl_mdio driver codes a little bit, by: - Fix misuse of tab and space here and there - Use correct multi-line comment format - Replace license identifier to GPL-2.0+ Signed-off-by: Bin Meng Acked-by: Joe Hershberger --- diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index d6b181b386..ae3d035848 100644 --- a/drivers/net/fsl_mdio.c +++ b/drivers/net/fsl_mdio.c @@ -5,6 +5,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include @@ -32,8 +33,7 @@ int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int value; int timeout = 1000000; - /* Put the address of the phy, and the register - * number into MIIMADD */ + /* Put the address of the phy, and the register number into MIIMADD */ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); /* Clear the command register, and wait */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 4bdc188c8f..4aeb387acb 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1,14 +1,11 @@ /* * Freescale Three Speed Ethernet Controller driver * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * author Andy Fleming * + * SPDX-License-Identifier: GPL-2.0+ */ #include @@ -84,8 +81,10 @@ static struct tsec_info_struct tsec_info[] = { /* Configure the TBI for SGMII operation */ static void tsec_configure_serdes(struct tsec_private *priv) { - /* Access TBI PHY registers at given TSEC register offset as opposed - * to the register offset used for external PHY accesses */ + /* + * Access TBI PHY registers at given TSEC register offset as opposed + * to the register offset used for external PHY accesses + */ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa), 0, TBI_ANA, TBIANA_SETTINGS); tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa), @@ -100,7 +99,8 @@ static void tsec_configure_serdes(struct tsec_private *priv) /* Set the appropriate hash bit for the given addr */ -/* The algorithm works like so: +/* + * The algorithm works like so: * 1) Take the Destination Address (ie the multicast address), and * do a CRC on it (little endian), and reverse the bits of the * result. @@ -111,9 +111,9 @@ static void tsec_configure_serdes(struct tsec_private *priv) * hash index which gaddr register to use, and the 5 other bits * indicate which bit (assuming an IBM numbering scheme, which * for PowerPC (tm) is usually the case) in the register holds - * the entry. */ -static int -tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) + * the entry. + */ +static int tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) { struct tsec_private *priv = (struct tsec_private *)dev->priv; struct tsec __iomem *regs = priv->regs; @@ -135,7 +135,8 @@ tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) } #endif /* Multicast TFTP ? */ -/* Initialized required registers to appropriate values, zeroing +/* + * Initialized required registers to appropriate values, zeroing * those we don't care about (unless zero is bad, in which case, * choose a more appropriate value) */ @@ -181,7 +182,8 @@ static void init_registers(struct tsec __iomem *regs) } -/* Configure maccfg2 based on negotiated speed and duplex +/* + * Configure maccfg2 based on negotiated speed and duplex * reported by PHY handling code */ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) @@ -212,7 +214,8 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) case 10: maccfg2 |= MACCFG2_MII; - /* Set R100 bit in all modes although + /* + * Set R100 bit in all modes although * it is only used in RGMII mode */ if (phydev->speed == 100) @@ -315,7 +318,8 @@ void redundant_init(struct eth_device *dev) } #endif -/* Set up the buffers and their descriptors, and bring up the +/* + * Set up the buffers and their descriptors, and bring up the * interface */ static void startup_tsec(struct eth_device *dev) @@ -369,9 +373,10 @@ static void startup_tsec(struct eth_device *dev) clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); } -/* This returns the status bits of the device. The return value +/* + * This returns the status bits of the device. The return value * is never checked, and this is what the 8260 driver did, so we - * do the same. Presumably, this would be zero if there were no + * do the same. Presumably, this would be zero if there were no * errors */ static int tsec_send(struct eth_device *dev, void *packet, int length) @@ -446,7 +451,6 @@ static int tsec_recv(struct eth_device *dev) } return -1; - } /* Stop the interface */ @@ -468,10 +472,11 @@ static void tsec_halt(struct eth_device *dev) phy_shutdown(priv->phydev); } -/* Initializes data structures and registers for the controller, - * and brings the interface up. Returns the link status, meaning +/* + * Initializes data structures and registers for the controller, + * and brings the interface up. Returns the link status, meaning * that it returns success if the link is up, failure otherwise. - * This allows u-boot to find the first active controller. + * This allows U-Boot to find the first active controller. */ static int tsec_init(struct eth_device *dev, bd_t * bd) { @@ -489,7 +494,8 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) /* Init ECNTRL */ out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS); - /* Copy the station address into the address registers. + /* + * Copy the station address into the address registers. * For a station address of 0x12345678ABCD in transmission * order (BE), MACnADDR1 is set to 0xCDAB7856 and * MACnADDR2 is set to 0x34120000. @@ -551,8 +557,8 @@ static phy_interface_t tsec_get_interface(struct tsec_private *priv) * be set by the platform code. */ if ((interface == PHY_INTERFACE_MODE_RGMII_ID) || - (interface == PHY_INTERFACE_MODE_RGMII_TXID) || - (interface == PHY_INTERFACE_MODE_RGMII_RXID)) + (interface == PHY_INTERFACE_MODE_RGMII_TXID) || + (interface == PHY_INTERFACE_MODE_RGMII_RXID)) return interface; return PHY_INTERFACE_MODE_RGMII; @@ -565,8 +571,8 @@ static phy_interface_t tsec_get_interface(struct tsec_private *priv) return PHY_INTERFACE_MODE_MII; } - -/* Discover which PHY is attached to the device, and configure it +/* + * Discover which PHY is attached to the device, and configure it * properly. If the PHY is not recognized, then return 0 * (failure). Otherwise, return 1 */ @@ -605,7 +611,8 @@ static int init_phy(struct eth_device *dev) return 1; } -/* Initialize device structure. Returns success if PHY +/* + * Initialize device structure. Returns success if PHY * initialization succeeded (i.e. if it recognizes the PHY) */ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) @@ -645,7 +652,7 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) dev->mcast = tsec_mcast_addr; #endif - /* Tell u-boot to get the addr from the env */ + /* Tell U-Boot to get the addr from the env */ for (i = 0; i < 6; i++) dev->enetaddr[i] = 0; diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index 2137282df3..25678a9988 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -5,6 +5,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #ifndef __FSL_PHY_H__ #define __FSL_PHY_H__ @@ -27,9 +28,9 @@ int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc); #define PHY_EXT_PAGE_ACCESS 0x1f /* MII Management Configuration Register */ -#define MIIMCFG_RESET_MGMT 0x80000000 -#define MIIMCFG_MGMT_CLOCK_SELECT 0x00000007 -#define MIIMCFG_INIT_VALUE 0x00000003 +#define MIIMCFG_RESET_MGMT 0x80000000 +#define MIIMCFG_MGMT_CLOCK_SELECT 0x00000007 +#define MIIMCFG_INIT_VALUE 0x00000003 /* MII Management Command Register */ #define MIIMCOM_READ_CYCLE 0x00000001 diff --git a/include/tsec.h b/include/tsec.h index 1119d2cb60..f2aa11abe6 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -3,15 +3,12 @@ * * Driver for the Motorola Triple Speed Ethernet Controller * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * * Copyright 2004, 2007, 2009, 2011, 2013 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * maintained by Xianghua Xiao (x.xiao@motorola.com) * author Andy Fleming * + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __TSEC_H @@ -67,11 +64,11 @@ x.mii_devname = DEFAULT_MII_NAME;\ } -#define MAC_ADDR_LEN 6 +#define MAC_ADDR_LEN 6 /* #define TSEC_TIMEOUT 1000000 */ -#define TSEC_TIMEOUT 1000 -#define TOUT_LOOP 1000000 +#define TSEC_TIMEOUT 1000 +#define TOUT_LOOP 1000000 /* TBI register addresses */ #define TBI_CR 0x00 @@ -83,8 +80,8 @@ /* TBI MDIO register bit fields*/ #define TBICON_CLK_SELECT 0x0020 -#define TBIANA_ASYMMETRIC_PAUSE 0x0100 -#define TBIANA_SYMMETRIC_PAUSE 0x0080 +#define TBIANA_ASYMMETRIC_PAUSE 0x0100 +#define TBIANA_SYMMETRIC_PAUSE 0x0080 #define TBIANA_HALF_DUPLEX 0x0040 #define TBIANA_FULL_DUPLEX 0x0020 #define TBICR_PHY_RESET 0x8000 @@ -93,13 +90,12 @@ #define TBICR_FULL_DUPLEX 0x0100 #define TBICR_SPEED1_SET 0x0040 - /* MAC register bits */ #define MACCFG1_SOFT_RESET 0x80000000 #define MACCFG1_RESET_RX_MC 0x00080000 #define MACCFG1_RESET_TX_MC 0x00040000 #define MACCFG1_RESET_RX_FUN 0x00020000 -#define MACCFG1_RESET_TX_FUN 0x00010000 +#define MACCFG1_RESET_TX_FUN 0x00010000 #define MACCFG1_LOOPBACK 0x00000100 #define MACCFG1_RX_FLOW 0x00000020 #define MACCFG1_TX_FLOW 0x00000010 @@ -122,7 +118,7 @@ #define ECNTRL_SGMII_MODE 0x00000002 #ifndef CONFIG_SYS_TBIPA_VALUE - #define CONFIG_SYS_TBIPA_VALUE 0x1f +# define CONFIG_SYS_TBIPA_VALUE 0x1f #endif #define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN @@ -137,7 +133,6 @@ #define TSTAT_CLEAR_THALT 0x80000000 #define RSTAT_CLEAR_RHALT 0x00800000 - #define IEVENT_INIT_CLEAR 0xffffffff #define IEVENT_BABR 0x80000000 #define IEVENT_RXC 0x40000000 @@ -164,11 +159,9 @@ #define IMASK_TXFEN 0x00100000 #define IMASK_RXFEN0 0x00000080 - /* Default Attribute fields */ -#define ATTR_INIT_SETTINGS 0x000000c0 -#define ATTRELI_INIT_SETTINGS 0x00000000 - +#define ATTR_INIT_SETTINGS 0x000000c0 +#define ATTRELI_INIT_SETTINGS 0x00000000 /* TxBD status field bits */ #define TXBD_READY 0x8000 @@ -181,7 +174,7 @@ #define TXBD_HUGEFRAME 0x0080 #define TXBD_LATECOLLISION 0x0080 #define TXBD_RETRYLIMIT 0x0040 -#define TXBD_RETRYCOUNTMASK 0x003c +#define TXBD_RETRYCOUNTMASK 0x003c #define TXBD_UNDERRUN 0x0002 #define TXBD_STATS 0x03ff @@ -204,15 +197,15 @@ #define RXBD_STATS 0x003f struct txbd8 { - uint16_t status; /* Status Fields */ - uint16_t length; /* Buffer length */ - uint32_t bufptr; /* Buffer Pointer */ + uint16_t status; /* Status Fields */ + uint16_t length; /* Buffer length */ + uint32_t bufptr; /* Buffer Pointer */ }; struct rxbd8 { - uint16_t status; /* Status Fields */ - uint16_t length; /* Buffer Length */ - uint32_t bufptr; /* Buffer Pointer */ + uint16_t status; /* Status Fields */ + uint16_t length; /* Buffer Length */ + uint32_t bufptr; /* Buffer Pointer */ }; struct tsec_rmon_mib { @@ -336,15 +329,15 @@ struct tsec { u32 rbdlen; /* RxBD Data Length */ u32 res310[4]; u32 res320; - u32 crbptr; /* Current Receive Buffer Pointer */ + u32 crbptr; /* Current Receive Buffer Pointer */ u32 res328[6]; - u32 mrblr; /* Maximum Receive Buffer Length */ + u32 mrblr; /* Maximum Receive Buffer Length */ u32 res344[16]; - u32 rbptr; /* RxBD Pointer */ + u32 rbptr; /* RxBD Pointer */ u32 res388[30]; /* (0x2_n400) */ u32 res400; - u32 rbase; /* RxBD Base Address */ + u32 rbase; /* RxBD Base Address */ u32 res408[62]; /* MAC Registers (0x2_n500) */ @@ -388,7 +381,7 @@ struct tsec { u32 resc00[256]; }; -#define TSEC_GIGABIT (1 << 0) +#define TSEC_GIGABIT (1 << 0) /* These flags currently only have meaning if we're using the eTSEC */ #define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */