From: Bastien Curutchet Date: Fri, 20 Sep 2024 08:28:06 +0000 (+0200) Subject: spi: davinci: Drop the preload of TX buffer before read/writes operations X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=983fd3d06db68e57a0fc8d6e4a2dffe4c69e9743;p=u-boot.git spi: davinci: Drop the preload of TX buffer before read/writes operations A write to the TX buffer is performed before entering the loop to "avoid clock starvation". This sometimes results in subsequent writes in davinci_spi_xfer_data() to occur while the TXFULL bit is asserted, leading to write failures. Remove the preload of the TX buffer. Signed-off-by: Bastien Curutchet --- diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 82049872d0..19bd06cf87 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -129,9 +129,6 @@ static int davinci_spi_read(struct davinci_spi_slave *ds, unsigned int len, while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) ; - /* preload the TX buffer to avoid clock starvation */ - writel(data1_reg_val, &ds->regs->dat1); - /* keep reading 1 byte until only 1 byte left */ while ((len--) > 1) *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val); @@ -159,12 +156,6 @@ static int davinci_spi_write(struct davinci_spi_slave *ds, unsigned int len, while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) ; - /* preload the TX buffer to avoid clock starvation */ - if (len > 2) { - writel(data1_reg_val | *txp++, &ds->regs->dat1); - len--; - } - /* keep writing 1 byte until only 1 byte left */ while ((len--) > 1) davinci_spi_xfer_data(ds, data1_reg_val | *txp++);