From: Johan Jonker Date: Sun, 19 Mar 2023 15:05:57 +0000 (+0100) Subject: arm: dts: rockchip: sync rk3066/rk3188 DT files from linux-next v6.2-rc4 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=98125086d676f00f5fa4b56e27de98534025f91c;p=u-boot.git arm: dts: rockchip: sync rk3066/rk3188 DT files from linux-next v6.2-rc4 Sync rk3066/rk3188 DT files from Linux. This is the state as of linux-next v6.2-rc4. New nfc node for MK808 rk3066a. CRU nodes now have a clock property. To prefend dtoc errors a fixed clock must also be included for tpl/spl in the rk3xxx-u-boot.dtsi file. Signed-off-by: Johan Jonker Reviewed-by: Simon Glass Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts index 667d57a4ff..06790f05b3 100644 --- a/arch/arm/dts/rk3066a-mk808.dts +++ b/arch/arm/dts/rk3066a-mk808.dts @@ -32,7 +32,7 @@ keyup-threshold-microvolt = <2500000>; poll-interval = <100>; - recovery { + button-recovery { label = "recovery"; linux,code = ; press-threshold-microvolt = <0>; @@ -157,7 +157,32 @@ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; pinctrl-names = "default"; vmmc-supply = <&vcc_wifi>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&nfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nand@0 { + reg = <0>; + label = "rk-nand"; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <40>; + nand-is-boot-medium; + rockchip,boot-blks = <8>; + rockchip,boot-ecc-strength = <24>; + }; }; &pinctrl { diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi index c25b9695db..de9915d946 100644 --- a/arch/arm/dts/rk3066a.dtsi +++ b/arch/arm/dts/rk3066a.dtsi @@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts index e7138a4ae0..118deacd38 100644 --- a/arch/arm/dts/rk3188-radxarock.dts +++ b/arch/arm/dts/rk3188-radxarock.dts @@ -6,7 +6,6 @@ /dts-v1/; #include #include "rk3188.dtsi" -#include "rk3188-radxarock-u-boot.dtsi" / { model = "Radxa Rock"; @@ -25,7 +24,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; @@ -72,7 +71,7 @@ #sound-dai-cells = <0>; }; - ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -127,18 +126,21 @@ }; &emac { - status = "okay"; - + phy = <&phy0>; + phy-supply = <&vcc_rmii>; pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + status = "okay"; - phy = <&phy0>; - phy-supply = <&vcc_rmii>; + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - interrupt-parent = <&gpio3>; - interrupts = ; + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = ; + }; }; }; diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi index 9a80f83a1a..44b54af0bb 100644 --- a/arch/arm/dts/rk3188.dtsi +++ b/arch/arm/dts/rk3188.dtsi @@ -54,7 +54,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; }; @@ -223,7 +224,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@2000a000 { + gpio0: gpio@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = ; @@ -236,7 +237,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = ; @@ -249,7 +250,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = ; @@ -262,7 +263,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = ; @@ -275,15 +276,15 @@ #interrupt-cells = <2>; }; - pcfg_pull_up: pcfg_pull_up { + pcfg_pull_up: pcfg-pull-up { bias-pull-up; }; - pcfg_pull_down: pcfg_pull_down { + pcfg_pull_down: pcfg-pull-down { bias-pull-down; }; - pcfg_pull_none: pcfg_pull_none { + pcfg_pull_none: pcfg-pull-none { bias-disable; }; @@ -378,7 +379,7 @@ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; - lcdc1_rgb24: ldcd1-rgb24 { + lcdc1_rgb24: lcdc1-rgb24 { rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, <2 RK_PA1 1 &pcfg_pull_none>, <2 RK_PA2 1 &pcfg_pull_none>, @@ -606,7 +607,6 @@ &global_timer { interrupts = ; - status = "disabled"; }; &local_timer { @@ -641,6 +641,11 @@ &grf { compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd"; + io_domains: io-domains { + compatible = "rockchip,rk3188-io-voltage-domain"; + status = "disabled"; + }; + usbphy: usbphy { compatible = "rockchip,rk3188-usb-phy"; #address-cells = <1>; diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi index f50bacdb84..6af6a451ea 100644 --- a/arch/arm/dts/rk3xxx-u-boot.dtsi +++ b/arch/arm/dts/rk3xxx-u-boot.dtsi @@ -33,3 +33,7 @@ &uart2 { clock-frequency = <24000000>; }; + +&xin24m { + bootph-all; +}; diff --git a/arch/arm/dts/rk3xxx.dtsi b/arch/arm/dts/rk3xxx.dtsi index 616a828e0c..cb4e42ede5 100644 --- a/arch/arm/dts/rk3xxx.dtsi +++ b/arch/arm/dts/rk3xxx.dtsi @@ -76,6 +76,13 @@ reg = <0x1013c200 0x20>; interrupts = ; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ }; local_timer: local-timer@1013c600 { @@ -186,8 +193,6 @@ compatible = "snps,arc-emac"; reg = <0x10204000 0x3c>; interrupts = ; - #address-cells = <1>; - #size-cells = <0>; rockchip,grf = <&grf>;