From: Mario Six Date: Thu, 27 Sep 2018 07:19:30 +0000 (+0200) Subject: video_osd: Add ihs_video_out driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9671f696e52b1af72fe5566bf5a6fefc6a6fefa5;p=u-boot.git video_osd: Add ihs_video_out driver Add a driver for IHS OSDs on IHS FPGAs. Reviewed-by: Simon Glass Signed-off-by: Mario Six --- diff --git a/doc/device-tree-bindings/video/osd/gdsys,ihs_video_out.txt b/doc/device-tree-bindings/video/osd/gdsys,ihs_video_out.txt new file mode 100644 index 0000000000..d7aacc827e --- /dev/null +++ b/doc/device-tree-bindings/video/osd/gdsys,ihs_video_out.txt @@ -0,0 +1,23 @@ +* Guntermann & Drunck Integrated Hardware Systems OSD + +Required properties: +- compatible: "gdsys,ihs_video_out" +- reg: A combination of three register spaces: + - Register base for the video registers + - Register base for the OSD registers + - Address of the OSD video memory +- mode: The initial resolution and frequency: "1024_768_60", "720_400_70", or + "640_480_70" +- clk_gen: phandle to the pixel clock generator +- dp_tx: phandle to the display associated with the OSD + +Example: + +fpga0_video0 { + compatible = "gdsys,ihs_video_out"; + reg = <0x100 0x40 + 0x180 0x20 + 0x1000 0x1000>; + dp_tx = <&fpga0_dp_video0>; + clk_gen = <&fpga0_video0_clkgen>; +}; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4e627a315b..1e2cbe7afc 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -691,4 +691,13 @@ config OSD This supports drivers that provide a OSD (on-screen display), which is a (usually text-oriented) graphics buffer to show information on a display. + +config IHS_VIDEO_OUT + bool "Enable IHS video out driver" + depends on OSD + help + Enable support for the gdsys Integrated Hardware Systems (IHS) video + out On-screen Display (OSD) used on gdsys FPGAs to control dynamic + textual overlays of the display outputs. + endmenu diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 9cec564373..290747ba94 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o obj-$(CONFIG_FORMIKE) += formike.o obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o +obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_LG4573) += lg4573.o obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o diff --git a/drivers/video/ihs_video_out.c b/drivers/video/ihs_video_out.c new file mode 100644 index 0000000000..5cdf17aec1 --- /dev/null +++ b/drivers/video/ihs_video_out.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2017 + * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc + * + * based on the gdsys osd driver, which is + * + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.de + */ + +#include +#include +#include +#include +#include +#include + +static const uint MAX_X_CHARS = 53; +static const uint MAX_Y_CHARS = 26; +static const uint MAX_VIDEOMEM_WIDTH = 64; +static const uint MAX_VIDEOMEM_HEIGHT = 32; +static const uint CHAR_WIDTH = 12; +static const uint CHAR_HEIGHT = 18; + +static const u16 BASE_WIDTH_MASK = 0x3f00; +static const uint BASE_WIDTH_SHIFT = 8; +static const u16 BASE_HEIGTH_MASK = 0x001f; +static const uint BASE_HEIGTH_SHIFT; + +struct ihs_video_out_regs { + /* Device version register */ + u16 versions; + /* Device feature register */ + u16 features; + /* Device control register */ + u16 control; + /* Register controlling screen size */ + u16 xy_size; + /* Register controlling screen scaling */ + u16 xy_scale; + /* Register controlling screen x position */ + u16 x_pos; + /* Register controlling screen y position */ + u16 y_pos; +}; + +#define ihs_video_out_set(map, member, val) \ + regmap_range_set(map, 1, struct ihs_video_out_regs, member, val) + +#define ihs_video_out_get(map, member, valp) \ + regmap_range_get(map, 1, struct ihs_video_out_regs, member, valp) + +enum { + CONTROL_FILTER_BLACK = (0 << 0), + CONTROL_FILTER_ORIGINAL = (1 << 0), + CONTROL_FILTER_DARKER = (2 << 0), + CONTROL_FILTER_GRAY = (3 << 0), + + CONTROL_MODE_PASSTHROUGH = (0 << 3), + CONTROL_MODE_OSD = (1 << 3), + CONTROL_MODE_AUTO = (2 << 3), + CONTROL_MODE_OFF = (3 << 3), + + CONTROL_ENABLE_OFF = (0 << 6), + CONTROL_ENABLE_ON = (1 << 6), +}; + +struct ihs_video_out_priv { + /* Register map for OSD device */ + struct regmap *map; + /* Pointer to video memory */ + u16 *vidmem; + /* Display width in text columns */ + uint base_width; + /* Display height in text rows */ + uint base_height; + /* x-resolution of the display in pixels */ + uint res_x; + /* y-resolution of the display in pixels */ + uint res_y; + /* OSD's sync mode (resolution + frequency) */ + int sync_src; + /* The display port output for this OSD */ + struct udevice *video_tx; + /* The pixel clock generator for the display */ + struct udevice *clk_gen; +}; + +static const struct udevice_id ihs_video_out_ids[] = { + { .compatible = "gdsys,ihs_video_out" }, + { } +}; + +/** + * set_control() - Set the control register to a given value + * + * The current value of sync_src is preserved by the function automatically. + * + * @dev: the OSD device whose control register to set + * @value: the 16-bit value to write to the control register + * Return: 0 + */ +static int set_control(struct udevice *dev, u16 value) +{ + struct ihs_video_out_priv *priv = dev_get_priv(dev); + + if (priv->sync_src) + value |= ((priv->sync_src & 0x7) << 8); + + ihs_video_out_set(priv->map, control, value); + + return 0; +} + +int ihs_video_out_get_info(struct udevice *dev, struct video_osd_info *info) +{ + struct ihs_video_out_priv *priv = dev_get_priv(dev); + u16 versions; + + ihs_video_out_get(priv->map, versions, &versions); + + info->width = priv->base_width; + info->height = priv->base_height; + info->major_version = versions / 100; + info->minor_version = versions % 100; + + return 0; +} + +int ihs_video_out_set_mem(struct udevice *dev, uint col, uint row, u8 *buf, + size_t buflen, uint count) +{ + struct ihs_video_out_priv *priv = dev_get_priv(dev); + int res; + uint offset; + uint k, rep; + u16 data; + + /* Repetitions (controlled via count parmeter) */ + for (rep = 0; rep < count; ++rep) { + offset = row * priv->base_width + col + rep * (buflen / 2); + + /* Write a single buffer copy */ + for (k = 0; k < buflen / 2; ++k) { + uint max_size = priv->base_width * priv->base_height; + + if (offset + k >= max_size) { + debug("%s: Write would be out of OSD bounds\n", + dev->name); + return -E2BIG; + } + + data = buf[2 * k + 1] + 256 * buf[2 * k]; + out_le16(priv->vidmem + offset + k, data); + } + } + + res = set_control(dev, CONTROL_FILTER_ORIGINAL | + CONTROL_MODE_OSD | + CONTROL_ENABLE_ON); + if (res) { + debug("%s: Could not set control register\n", dev->name); + return res; + } + + return 0; +} + +/** + * div2_u16() - Approximately divide a 16-bit number by 2 + * + * @val: The 16-bit value to divide by two + * Return: The approximate division of val by two + */ +static inline u16 div2_u16(u16 val) +{ + return (32767 * val) / 65535; +} + +int ihs_video_out_set_size(struct udevice *dev, uint col, uint row) +{ + struct ihs_video_out_priv *priv = dev_get_priv(dev); + + if (!col || col > MAX_VIDEOMEM_WIDTH || col > MAX_X_CHARS || + !row || row > MAX_VIDEOMEM_HEIGHT || row > MAX_Y_CHARS) { + debug("%s: Desired OSD size invalid\n", dev->name); + return -EINVAL; + } + + ihs_video_out_set(priv->map, xy_size, ((col - 1) << 8) | (row - 1)); + /* Center OSD on screen */ + ihs_video_out_set(priv->map, x_pos, + div2_u16(priv->res_x - CHAR_WIDTH * col)); + ihs_video_out_set(priv->map, y_pos, + div2_u16(priv->res_y - CHAR_HEIGHT * row)); + + return 0; +} + +int ihs_video_out_print(struct udevice *dev, uint col, uint row, ulong color, + char *text) +{ + int res; + u8 buffer[2 * MAX_VIDEOMEM_WIDTH]; + uint k; + uint charcount = strlen(text); + uint len = min(charcount, 2 * MAX_VIDEOMEM_WIDTH); + + for (k = 0; k < len; ++k) { + buffer[2 * k] = text[k]; + buffer[2 * k + 1] = color; + } + + res = ihs_video_out_set_mem(dev, col, row, buffer, 2 * len, 1); + if (res < 0) { + debug("%s: Could not write to video memory\n", dev->name); + return res; + } + + return 0; +} + +static const struct video_osd_ops ihs_video_out_ops = { + .get_info = ihs_video_out_get_info, + .set_mem = ihs_video_out_set_mem, + .set_size = ihs_video_out_set_size, + .print = ihs_video_out_print, +}; + +int ihs_video_out_probe(struct udevice *dev) +{ + struct ihs_video_out_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args phandle_args; + const char *mode; + u16 features; + struct display_timing timing; + int res; + + res = regmap_init_mem(dev_ofnode(dev), &priv->map); + if (!res) { + debug("%s: Could initialize regmap (err = %d)\n", dev->name, + res); + return res; + } + + /* Range with index 2 is video memory */ + priv->vidmem = regmap_get_range(priv->map, 2); + + mode = dev_read_string(dev, "mode"); + if (!mode) { + debug("%s: Could not read mode property\n", dev->name); + return -EINVAL; + } + + if (!strcmp(mode, "1024_768_60")) { + priv->sync_src = 2; + priv->res_x = 1024; + priv->res_y = 768; + timing.hactive.typ = 1024; + timing.vactive.typ = 768; + } else if (!strcmp(mode, "720_400_70")) { + priv->sync_src = 1; + priv->res_x = 720; + priv->res_y = 400; + timing.hactive.typ = 720; + timing.vactive.typ = 400; + } else { + priv->sync_src = 0; + priv->res_x = 640; + priv->res_y = 480; + timing.hactive.typ = 640; + timing.vactive.typ = 480; + } + + ihs_video_out_get(priv->map, features, &features); + + res = set_control(dev, CONTROL_FILTER_ORIGINAL | + CONTROL_MODE_OSD | + CONTROL_ENABLE_OFF); + if (res) { + debug("%s: Could not set control register (err = %d)\n", + dev->name, res); + return res; + } + + priv->base_width = ((features & BASE_WIDTH_MASK) + >> BASE_WIDTH_SHIFT) + 1; + priv->base_height = ((features & BASE_HEIGTH_MASK) + >> BASE_HEIGTH_SHIFT) + 1; + + res = dev_read_phandle_with_args(dev, "clk_gen", NULL, 0, 0, + &phandle_args); + if (res) { + debug("%s: Could not get clk_gen node (err = %d)\n", + dev->name, res); + return -EINVAL; + } + + res = uclass_get_device_by_ofnode(UCLASS_CLK, phandle_args.node, + &priv->clk_gen); + if (res) { + debug("%s: Could not get clk_gen dev (err = %d)\n", + dev->name, res); + return -EINVAL; + } + + res = dev_read_phandle_with_args(dev, "video_tx", NULL, 0, 0, + &phandle_args); + if (res) { + debug("%s: Could not get video_tx (err = %d)\n", + dev->name, res); + return -EINVAL; + } + + res = uclass_get_device_by_ofnode(UCLASS_DISPLAY, phandle_args.node, + &priv->video_tx); + if (res) { + debug("%s: Could not get video_tx dev (err = %d)\n", + dev->name, res); + return -EINVAL; + } + + res = display_enable(priv->video_tx, 8, &timing); + if (res) { + debug("%s: Could not enable the display (err = %d)\n", + dev->name, res); + return res; + } + + return 0; +} + +U_BOOT_DRIVER(ihs_video_out_drv) = { + .name = "ihs_video_out_drv", + .id = UCLASS_VIDEO_OSD, + .ops = &ihs_video_out_ops, + .of_match = ihs_video_out_ids, + .probe = ihs_video_out_probe, + .priv_auto_alloc_size = sizeof(struct ihs_video_out_priv), +};