From: Soeren Moch Date: Thu, 10 Oct 2019 22:59:50 +0000 (+0200) Subject: board: tbs2910: Convert eth to driver model X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=954252aa350931ebf6b114cd0f59a05ab03f6bbf;p=u-boot.git board: tbs2910: Convert eth to driver model So we can remove lots of legacy config code. Signed-off-by: Soeren Moch --- diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index efc6f88198..b4fd183394 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -14,8 +14,6 @@ #include #include #include -#include -#include #include #include #include @@ -26,9 +24,6 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), @@ -39,43 +34,12 @@ static iomux_v3_cfg_t const uart2_pads[] = { MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - /* AR8035 PHY Reset */ - MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - int dram_init(void) { gd->ram_size = 2048ul * 1024 * 1024; return 0; } -static void setup_iomux_enet(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); - - /* Reset AR8035 PHY */ - gpio_request(IMX_GPIO_NR(1, 25), "ETH_PHY_RESET"); - gpio_direction_output(IMX_GPIO_NR(1, 25) , 0); - udelay(500); - gpio_set_value(IMX_GPIO_NR(1, 25), 1); -} - static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); @@ -184,45 +148,6 @@ static void setup_display(void) } #endif /* CONFIG_VIDEO_IPUV3 */ -static int ar8035_phy_fixup(struct phy_device *phydev) -{ - unsigned short val; - - /* To enable AR8035 ouput a 125MHz clk from CLK_25M */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); - - val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); - val &= 0xffe3; - val |= 0x18; - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); - - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - ar8035_phy_fixup(phydev); - - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_enet(); - return cpu_eth_init(bis); -} - int board_early_init_f(void) { setup_iomux_uart(); diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 98e5ca0846..42e6f58eee 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -52,6 +52,9 @@ CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PCI=y CONFIG_DM_PCI=y diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 11f76e777b..46d67a7fcf 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -40,15 +40,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ -/* Ethernet */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 4 -#define CONFIG_PHY_ATHEROS - /* Framebuffer */ #ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8