From: Fabio Estevam Date: Tue, 15 Aug 2023 13:48:01 +0000 (-0300) Subject: doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=951d63000e2daf8b128139cfed343fe2b2da5a93;p=u-boot.git doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export. The ATF address is now passed via binman. Remove the unneeded export ATF_LOAD_ADDR line. Signed-off-by: Fabio Estevam --- diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh b/doc/imx/habv4/csf_examples/mx8m/csf.sh index d87015f6c4..65c143073c 100644 --- a/doc/imx/habv4/csf_examples/mx8m/csf.sh +++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh @@ -11,7 +11,6 @@ # 1) Build U-Boot (e.g. for i.MX8MM) # -# export ATF_LOAD_ADDR=0x920000 # cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin . # cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* . # make -j imx8mm_board_defconfig