From: Stefan Roese Date: Thu, 3 Mar 2016 15:57:39 +0000 (+0100) Subject: arm: socfpga: sr1500: Misc updates (SPI speed, env location) X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=93d9fc26cb7b4fcbb849e79d21d16b114e4501a9;p=u-boot.git arm: socfpga: sr1500: Misc updates (SPI speed, env location) This patch makes the following changes to the SR1500 board port: - Update defconfig to support SPI NOR (use make savedefconfig). - Increase SPI speed to a maximum of 100MHz for faster system bootup. - Change environment location, so that its not between SPL and main U-Boot. This way the combined SPL / U-Boot image can be used for updates. Signed-off-by: Stefan Roese Cc: Marek Vasut --- diff --git a/arch/arm/dts/socfpga_cyclone5_sr1500.dts b/arch/arm/dts/socfpga_cyclone5_sr1500.dts index 3729ca02cd..32c6aad30d 100644 --- a/arch/arm/dts/socfpga_cyclone5_sr1500.dts +++ b/arch/arm/dts/socfpga_cyclone5_sr1500.dts @@ -88,7 +88,7 @@ #size-cells = <1>; compatible = "n25q00", "spi-flash"; reg = <0>; /* chip select */ - spi-max-frequency = <50000000>; + spi-max-frequency = <100000000>; m25p,fast-read; page-size = <256>; block-size = <16>; /* 2^16, 64KB */ diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index 59a6be497e..d499a14bac 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -15,7 +15,9 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_SYS_NS16550=y +CONFIG_CADENCE_QSPI=y diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index e4aafaafc3..6414eeb914 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -93,22 +93,27 @@ #define CONFIG_SYS_BOOTCOUNT_BE /* Environment setting for SPI flash */ -#undef CONFIG_ENV_SIZE #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_SECT_SIZE (64 * 1024) #define CONFIG_ENV_SIZE (16 * 1024) -#define CONFIG_ENV_OFFSET 0x00040000 +#define CONFIG_ENV_OFFSET 0x000e0000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SPI_MAX_HZ 100000000 /* Use max of 100MHz */ +#define CONFIG_SF_DEFAULT_SPEED 100000000 + +/* + * The QSPI NOR flash layout on SR1500: + * + * 0000.0000 - 0003.ffff: SPL (4 times) + * 0004.0000 - 000d.ffff: U-Boot + * 000e.0000 - 000e.ffff: env1 + * 000f.0000 - 000f.ffff: env2 + */ /* The rest of the configuration is shared */ #include -/* U-Boot payload is stored at offset 0x60000 */ -#undef CONFIG_SYS_SPI_U_BOOT_OFFS -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x60000 - #endif /* __CONFIG_SOCFPGA_SR1500_H__ */