From: Jonas Karlman Date: Sat, 17 Feb 2024 00:22:28 +0000 (+0000) Subject: rockchip: rk3328-evb: Update defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=93cc018ca86c794e07d1e40fdc8acf50ba03a41a;p=u-boot.git rockchip: rk3328-evb: Update defconfig Update defconfig for rk3328-evb with new defaults. Add DM_RESET=y to support using reset signals. Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Add MISC_INIT_R=y, ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Remove pinctrl-0 and pinctrl-names from CONFIG_OF_SPL_REMOVE_PROPS, SPL need to configure pinctrl for e.g. SD-card. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_ETH_PHY=y, PHY_MOTORCOMM=y and PHY_REALTEK=y to support common ethernet PHYs. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Add SYSINFO=y to support the sysinfo uclass. Also add missing device tree files to MAINTAINERS and remove the obsolete README file. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS index 5fc114a63f..dc750bd694 100644 --- a/board/rockchip/evb_rk3328/MAINTAINERS +++ b/board/rockchip/evb_rk3328/MAINTAINERS @@ -4,6 +4,8 @@ S: Maintained F: board/rockchip/evb_rk3328 F: include/configs/evb_rk3328.h F: configs/evb-rk3328_defconfig +F: arch/arm/dts/rk3328-evb.dts +F: arch/arm/dts/rk3328-evb-u-boot.dtsi NANOPI-R2C-RK3328 M: Tianling Shen diff --git a/board/rockchip/evb_rk3328/README b/board/rockchip/evb_rk3328/README deleted file mode 100644 index 6cbb66a4cf..0000000000 --- a/board/rockchip/evb_rk3328/README +++ /dev/null @@ -1,70 +0,0 @@ -Introduction -============ - -RK3328 key features we might use in U-Boot: -* CPU: ARMv8 64bit quad-core Cortex-A53 -* IRAM: 36KB -* DRAM: 4GB-16MB dual-channel -* eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 -* SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB2.0 EHCI host port *2 -* Display: RGB/HDMI/DP/MIPI/EDP - -evb key features: -* regulator: pwm regulator for CPU B/L -* PMIC: rk808 -* debug console: UART2 - -In order to support Arm Trust Firmware(ATF), we need to use the -miniloader from rockchip which: -* do DRAM init -* load and verify ATF image -* load and verify U-Boot image - -Here is the step-by-step to boot to U-Boot on rk3328. - -Get the Source and prebuild binary -================================== - - > mkdir ~/evb_rk3328 - > cd ~/evb_rk3328 - > git clone https://github.com/ARM-software/arm-trusted-firmware.git - > git clone https://github.com/rockchip-linux/rkbin - > git clone https://github.com/rockchip-linux/rkflashtool - -Compile ATF -=============== - - > cd arm-trusted-firmware - > make realclean - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3328 bl31 - -Compile U-Boot -================== - - > cd ../u-boot - > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3328_defconfig all - -Compile rkflashtool -======================= - - > cd ../rkflashtool - > make - -Package image for miniloader -================================ - > cd .. - > cp arm-trusted-firmware/build/rk3328/release/bl31.bin rkbin/rk33 - > ./rkbin/tools/trust_merger rkbin/tools/RK3328TRUST.ini - > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img - > mkdir image - > mv trust.img ./image/ - > mv uboot.img ./image/rk3328evb-uboot.bin - -Flash image -=============== -Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: - - > ./rkflashtool/rkflashloader rk3328evb - -You should be able to get U-Boot log message in console/UART2 now. diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig index b9c541a92a..5a5f59c04b 100644 --- a/configs/evb-rk3328_defconfig +++ b/configs/evb-rk3328_defconfig @@ -9,11 +9,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb" +CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3328=y CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x4000000 CONFIG_SPL_STACK=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 @@ -25,10 +25,13 @@ CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_MISC_INIT_R=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y @@ -41,22 +44,23 @@ CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_DRIVERS_MISC=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_TPL_OF_CONTROL=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_TPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 -CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y CONFIG_TPL_REGMAP=y @@ -70,8 +74,13 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y +CONFIG_ROCKCHIP_EFUSE=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_MOTORCOMM=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y @@ -79,17 +88,18 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y -CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y CONFIG_TPL_RAM=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSINFO=y CONFIG_SYSRESET=y # CONFIG_TPL_SYSRESET is not set CONFIG_USB=y