From: Simon Glass Date: Tue, 25 Apr 2023 16:54:39 +0000 (-0600) Subject: ide: Simplify success condition X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9367e6174aba22cd376e9d2c8fc1260115f44f97;p=u-boot.git ide: Simplify success condition Change the if() to remove extra brackets and check for the positive case first, i.e. when a device is found. Exit the loop in that case, with the retry logic in the 'else' part. Signed-off-by: Simon Glass --- diff --git a/drivers/block/ide.c b/drivers/block/ide.c index 2f45bb6bff..a51a0008ca 100644 --- a/drivers/block/ide.c +++ b/drivers/block/ide.c @@ -599,27 +599,25 @@ static void ide_ident(struct blk_desc *dev_desc) c = ide_wait(device, IDE_TIME_OUT); } - if (((c & ATA_STAT_DRQ) == 0) || - ((c & (ATA_STAT_FAULT | ATA_STAT_ERR)) != 0)) { - if (IS_ENABLED(CONFIG_ATAPI)) { - /* - * Need to soft reset the device - * in case it's an ATAPI... - */ - debug("Retrying...\n"); - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - mdelay(100); - ide_outb(device, ATA_COMMAND, 0x08); - mdelay(500); - /* Select device */ - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - } - tries--; - } else { + if ((c & ATA_STAT_DRQ) && + !(c & (ATA_STAT_FAULT | ATA_STAT_ERR))) { break; + } else if (IS_ENABLED(CONFIG_ATAPI)) { + /* + * Need to soft reset the device + * in case it's an ATAPI... + */ + debug("Retrying...\n"); + ide_outb(device, ATA_DEV_HD, + ATA_LBA | ATA_DEVICE(device)); + mdelay(100); + ide_outb(device, ATA_COMMAND, 0x08); + mdelay(500); + /* Select device */ + ide_outb(device, ATA_DEV_HD, + ATA_LBA | ATA_DEVICE(device)); } + tries--; } if (!tries) /* Not found */