From: Andre Przywara Date: Tue, 17 Oct 2023 16:08:52 +0000 (+0100) Subject: sunxi: H616: remove default AXP305 selection X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=929f198d07f39b4a0b901a9f022581bf540bee1f;p=u-boot.git sunxi: H616: remove default AXP305 selection The original H616 devices released about three years ago were typically paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller AXP313, and there seem to be far more systems with this PMIC around now. Remove the default AXP305 selection for the H616 SoC from the Kconfig, and move the PMIC selection into the board defconfig files instead. Signed-off-by: Andre Przywara Reviewed-by: Jaehoon Chung --- diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index 50009e823c..98aed846f1 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_I2C_SPEED=400000 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y +CONFIG_AXP305_POWER=y CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index 318951e19c..e805e0952b 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP305_POWER=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 2395720c99..33b8bc1214 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -56,7 +56,6 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 - default AXP305_POWER if MACH_SUN50I_H616 default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S